KSE-LIGHTS HL-3000-EX Hand Lamp User Manual
- June 1, 2024
- KSE-LIGHTS
Table of Contents
KSE-LIGHTS HL-3000-EX Hand Lamp
Product Information
Specifications:
- Model: HL-3000-EX
- Product Name: HL-3000-EX HAND LAMP
- Light Output / Lenses: 1500/900/1500/900 Lumens
- Beam Distance: 180/100/700/400 Meters
- Battery Life: 8/16 Hours
- Manufacturer: ZHEJIANG TORMIN ELECTRICAL CO., LTD.
- Production Date Format: May 2023 (Example: SN:23055506)
Product Usage Instructions
- Locate the serial number on the side of the housing or on the packaging to identify the production date.
- Ensure the lamp is fully charged before first use.
- To turn on the lamp, press the power button for a few seconds until the light activates.
- Adjust the light output by cycling through the different brightness levels available.
- To increase or decrease the beam distance, adjust the focus of the lenses accordingly.
- Monitor the battery life indicator to know when to recharge the lamp.
FAQ:
-
Q: How do I know when the battery is low?
A: The battery life indicator will show a low battery signal, indicating it’s time to recharge the lamp. -
Q: Can I replace the batteries in the lamp?
A: The batteries in this lamp are rechargeable and not intended to be replaced. Simply recharge the lamp using the provided charging cable. -
Q: How can I contact customer support for further assistance?
A: You can reach out to ZHEJIANG TORMIN ELECTRICAL CO., LTD. through their provided contact information for any product-related queries or support.
- 1500/900/1500/900 lumens
- 180/100/700/400 meters
- 8/16/ 8/16 hours
- POWER-/ working light (Hold button to switch between area/focus)
- 1500 grams
CHARACTERISTICS OF PERFORMANCE
This product is frequently used as a mobile lighting solution for inspecting high-voltage lines, search and rescue operations, equipment inspections, maintenance, and in various flammable and explosive environments. Zone 1 and Zone 2 for hazardous gases; Zone 21 and Zone 22 for hazardous dusts.
- The lamp offers four switchable lighting modes. You can choose not only between high-intensity and working light but also between focused and floodlight – simply press the button for 3 seconds. Details on switching between the two main lighting modes can be found on the next page.
- Equipped with high-performance LEDs, they are ideal for outdoor use and targeted searches.
- Thanks to our heat dissipation structure, the temperature of the LEDs is quickly dispersed, ensuring increased reliability and longevity.
- The lamp head is made of precisely crafted CNC aluminum, protected by a robust oxidation treatment. For additional durability, the main housing is made of sturdy PA plastic.
PRECAUTION
- Regularly inspect the casing for visible damage to ensure the flashlight remains waterproof. Significant damage to the lower plastic section might suggest is-sues with the internal batteries.
- When charging the flashlight in high-temperature environments or if it‘s illuminated at high intensity for extended periods, its surface might warm up slightly. This is expected behavior and not a cause for concern.
- Please refrain from covering the light exit window or placing the lamp on it. Do not direct the light straight into human eyes, as the intense light can cause harm.
- It‘s strongly advised against dis-assembling the flashlight, especially the sealed components.
- If you‘ve used the hand-held lamp in corrosive environments, such as by the sea, clean its surface thoroughly to prevent potential corrosion damage to the casing.
INSTRUCTION USAGE
- Press the button located behind the lamp head to turn on the light. Press it again to switch to work light. If you hold the button down for 3 seconds while the light is on, it will toggle between focus and floodlight modes.
- When the light is off, hold the switch for 2 seconds to activate the battery level indicator: 5 flashes indicate 100%, 4 flashes mean 80% (…).
- After initial uses, the charging time is approximately 6 hours. You can reconnect the hand lamp to the charger at any time. Once charged, the hand lamp is ready for use for up to 90 days. If you don‘t use the hand lamp for an extended period, please recharge the battery as per the instructions before using it again.
- If the power runs low during use, the brightness of the light will significantly dim and it will switch to strobe mode. The power will automatically shut off after about 10 minutes. At this point, stop using it and recharge the lamp promptly.
- The charger has a built-in charging protection mechanism. Open the rubber plug on the side of the lamp and insert the charger‘s output plug into the charging port. A red light will illuminate to indicate that the device is charging. When it changes from red to green, it signifies that the device is fully charged.
Ex marking:
II 2G Ex db eb mb IIC T6 Gb II 2D Ex tb IIIC T80°C Db -20 °C <Ta< +55 °C
Declaration of Conformity
according to directive 2014/34/EU (ATEX directive) according to directive
2014/35/EU (LVD directive) according to directive 2014/30/EU (EMC directive)
Manufacturer: Zhejiang Tormin Electrical Co., Ltd.
Distributor: KSE-LIGHTS GmbH
Address: Thüngenfeld 8, 58256 Ennepetal, Germany
Product: LED hand lamp
Types: HL-3000-EX (BW6610B)
Description: LED hand lamp with a compact aluminium housing. The lamp
includes a light source and a rechargeable accumulator.
Marking: II 2G Ex db eb mb IIC T6 Gb II 2D Ex tb IIIC T80°C Db
-20 °C ≤ Ta ≤ 55 °C
Issuer of EU-type examination certificate:
IMQ S.p.A. con Socio Unico, 20138 Milano, Italia
Applied standards for ATEX directive:
EN IEC 60079-0:2018 EN 60079-18:2015
EN 60079-1:2014 EN 60079-18:2015/A1:2017
EN 60079-7:2015 EN 60079-31:2014
EN IEC 60079-7:2015/A1:2018
Applied standards for LVD directive:
EN 60598-1:2021+A11:2022
EN 60598-2-4:2018 used in conjunction with
Applied standards for EMC directive:
EN 55015:2019+A11:2020 EN 61000-4-4:2012
EN 61000-3-2:2019 EN 61000-4-5:2014+A1:2017
EN 61000-3-3:2013+A1:2019 EN 61000-4-6:2014/AC:2015
EN 61547:2009 EN 61000-4-8:2010
EN 61000-4-2:2009 EN 61000-4-11:2004+A1:2017
EN 61000-4-3:2006+A1:2008+A2:2010
KSE-LIGHTS GmbH
Ennepetal, 17.08.2023
Signature:
Nikolai Seel (General management)
This declaration certifies compliance with the indicated directives but
implies no assurance of properties.
The safety of the product information should be observed. This statement turns
off automatically whenever changes are made to the product, that have not been
matched with the company KSE-LIGHTS GmbH.
KSE-LIGHTS GmbH
Thungenfeld 8
58256Ennepetal
Germany
Tel: +49 (0)2333-98247 30
Fax: +49 (0)2333-98247 49
Website: www.kse-lights.com
Email: info@kse-lights.com
Bankverbindung:
Sparkasse an Ennepe und Ruhr
IBAN: DE20 4545 0050 0000 0927 67
Swift/BIC: WELADED1ENE
Geschäftsführer: Detlev Seel / Nikolai Seel
WEEE-Reg.-Nr.DE 270 590 52
Registergericht Hagen HRB 7367
USt-IdNr.: DE 814 691 073
CHARGER
USAGE CHARGER
- During use, if the power is about to run out, the brightness of the light will be significantly dimmed and enter the stroboscopic state. The power will be automatically cut off after about 10 minutes. At this time, stop using and charge in time.
- The charger has a built-in charging protection device. Open the charging rubber plug on the side cover of the lamp, and insert the charger‘s output plug into the charging socket. The red light is on to indicate that it is charging, and the red to green indicates that it is fully charged.
The production date is part of the serial number. This can be found on the
side of the housing as well as on the packaging of the lamp (ex. SN:23055506
-> May 2023).
MANUFACTURER: ZHEJIANG
TORMIN ELECTRICAL CO., LTD.
ADD: No. 35, Qingjiang Road, High-tech District, Wenzhou, Zhejiang,
China. P. C: 325011
Tel: +86 577 56966366 +86 577 56966368
Fax: +86 577 56966166
Http://www.tormin-lighting.com
E-mail: sales@tormin.com
Thüngenfeld 8
58256 Ennepetal
Germany
+49 (0)2333 982 47 30
www.shop.kse-lights.com
www.kse-lights.com
References
- KSE Lights
- KSE-LIGHTS – Leuchten für maximale Sicherheit | KSE-LIGHTS
- Zhejiang Tormin Electrical Co.,Ltd.