Kimberly-Clark 48857 Hard Roll Towel Dispenser User Manual

Kimberly-Clark 48857 Hard Roll Towel Dispenser

Introduction

The Kimberly-Clark 48857 Hard Roll Towel Dispenser is a reliable and efficient solution for dispensing hard roll towels in various settings. Designed with convenience and durability in mind, this dispenser is an essential addition to any facility aiming for a hygienic and user-friendly hand-drying experience.

Specifications

What’s in the Box:

1. Kimberly-Clark 48857 Hard Roll Towel Dispenser
2. Mounting hardware
3. Installation instructions

Key Features

• Made of ABS plastic
• Choice of white with clear window or black with translucent window
• Dispenses one 8” diameter, 950’ roll towel
• Dispenser advances and cuts a nominal 11” of towel when activated by placing hand under unit
• Includes second sheet dispensed at 10% reduced length when activated within a few seconds of the first dispense
• Quiet dispensing system
• Quick-load capability
• Choice of key-activated spring lock or push-button operation
• 4 D-Cell Batteries included
• One per case

Dimension

How to Use

1. Open the dispenser using the provided key or unlocking mechanism.
2. Load the hard roll towels into the dispenser according to the provided instructions.
3. Close the dispenser securely.
4. Users can access towels by pulling down on the designated dispensing area.

Safety Precautions

• Installation : Follow the manufacturer’s guidelines and instructions for proper installation. Ensure that the dispenser is securely mounted to a stable surface.
• Accessibility : Install the dispenser at an accessible height to accommodate users of different heights and abilities, including those with disabilities. This promotes universal access and usability.
• Maintenance : Regularly inspect and maintain the dispenser to ensure proper functionality. Replace any damaged or worn-out parts promptly. Keep the dispenser clean to prevent the buildup of dirt or bacteria.
• Material Compatibility : Ensure that the towels used in the dispenser are compatible with the unit. Using the wrong type of towels may cause jams or malfunctions.
• Safety Labels : Check for safety labels or instructions provided by the manufacturer. These labels may contain important information about usage, maintenance, and safety precautions.
• Refilling Procedure : Follow the recommended procedure for refilling the dispenser to avoid potential injuries. Some dispensers may have mechanisms that need to be engaged or disengaged during the refill process.
• User Training : If the dispenser is used in a public or commercial setting, ensure that staff or users are properly trained on its usage, including how to refill it and troubleshoot basic issues.
• Hygiene : Towel dispensers are often used in environments where hygiene is crucial. Encourage users to practice good hand hygiene and dispose of used towels properly.

Maintenance

1. Regular Cleaning:
   • Clean the exterior of the dispenser regularly with a mild detergent and a soft cloth. Avoid abrasive cleaners, as they may damage the surface.
   • Pay attention to any visible dirt, fingerprints, or stains on the dispenser.
2. Refill Schedule:
   • Monitor the towel levels regularly and refill the dispenser as needed to ensure a continuous supply for users.
   • Follow the manufacturer’s recommendations for compatible towel rolls.
3. Inspect for Damages:
   • Periodically inspect the dispenser for any signs of damage, such as cracks or breakages.
   • If you notice any issues, contact Kimberly-Clark’s customer support for assistance.
4. Battery Replacement:
   • If the dispenser is battery-operated, replace batteries according to the manufacturer’s instructions.
   • Ensure that the battery compartment is clean and free from corrosion.
5. Adjustment and Calibration:
   • Some dispensers may have adjustable settings for sheet length and sensitivity. Refer to the user manual for instructions on making adjustments.
   • Calibrate the dispenser if necessary, following the provided guidelines.

Troubleshooting

1. Check for Paper Jams:
   • Open the dispenser and inspect for any paper jams or obstructions in the paper path.
   • Remove any torn or stuck paper, as it can prevent the dispenser from working correctly.
2. Verify Paper Installation:
   • Ensure that the paper roll is installed correctly according to the manufacturer’s instructions.
   • Confirm that the paper is feeding properly from the roll.
3. Batteries/Power Source:
   • If the dispenser is battery-operated, check the battery level. Low batteries can cause the dispenser to malfunction.
   • If the dispenser is electrically powered, ensure that it is properly connected to a power source.
4. Sensor Calibration:
   • If the dispenser has a sensor for touchless operation, check if it’s calibrated correctly. Adjust the sensor sensitivity if needed.
   • Clean the sensor to remove any dirt or residue that might be affecting its performance.
5. Dispensing Mechanism:
   • Inspect the dispensing mechanism for any signs of damage or wear.
   • Make sure that the cutting mechanism is sharp and not causing paper tearing issues.
6. Software/Programming (if applicable):
   • If the dispenser has programmable settings, ensure that they are configured correctly.
   • Reset the dispenser to its default settings and reprogram if necessary.
7. Regular Maintenance:
   • Perform regular maintenance as recommended in the user manual. This may include cleaning, lubricating moving parts, and replacing worn components.

FAQs

What is the Kimberly-Clark 48857 Hard Roll Towel Dispenser?

The Kimberly-Clark 48857 Hard Roll Towel Dispenser is a commercial-grade dispenser designed to provide convenient and hygienic access to paper towels in various settings.

What types of paper towels are compatible with this dispenser?

The Kimberly-Clark 48857 dispenser is typically compatible with hard roll paper towels, which are often used in high-traffic restroom and kitchen areas.

Is this dispenser suitable for use in commercial and industrial environments?

Yes, the Kimberly-Clark 48857 Hard Roll Towel Dispenser is designed for use in commercial and industrial settings, making it durable and reliable.

How is the paper towel dispensed from this unit?

Paper towels are typically dispensed manually by pulling down on the exposed portion, and the unit is designed to provide a controlled and measured release of towels.

Does this dispenser have any special features for hygiene?

Some models of this dispenser may include features such as touchless or hands- free dispensing to promote hygiene and reduce cross-contamination.

What is the capacity of this dispenser for paper towels?

The capacity of the Kimberly-Clark 48857 dispenser can vary, so it's important to check the product specifications for the specific model's capacity.

Is this dispenser easy to install?

Installation ease can vary, but it's often designed for straightforward installation. Detailed installation instructions may be provided with the unit.

Can this dispenser be mounted on various surfaces?

This dispenser is typically designed to be wall-mounted for stability and convenience. Mounting hardware and instructions are usually included.

Is there a warranty for the Kimberly-Clark 48857 Hard Roll Towel Dispenser?

Warranty coverage may vary depending on the manufacturer and model. Check the product documentation or contact the manufacturer for warranty details.

Is it possible to use generic or non-brand paper towels with this dispenser?

While many paper towel dispensers are designed for use with specific brand or type of paper towels, it's recommended to use compatible products for optimal performance.

Are replacement parts available for this dispenser?

Replacement parts for the Kimberly-Clark 48857 dispenser may be available through the manufacturer or authorized distributors, ensuring continued functionality.

What maintenance is required for this dispenser?

Regular maintenance may include refilling with paper towels, cleaning, and checking for any mechanical issues. Refer to the product manual for specific maintenance instructions.

Is this dispenser ADA-compliant for accessibility?

Some models of this dispenser may be ADA-compliant, designed to meet accessibility guidelines. Check the product specifications for ADA compliance information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>