Kimberly-Clark 58761 Standard Roll Toilet Paper Dispenser 4 Roll Vertical Faceplate User Guide
- June 3, 2024
- Kimberly-Clark
Table of Contents
Kimberly-Clark 58761 Standard Roll Toilet Paper Dispenser 4 Roll Vertical Faceplate
Faceplate Replacement
-
Open the dispenser lid then position sliding door to left side of dispenser opening. Align 3 teeth of bottom sliding door to 3 notches on sliding track. Gently support sliding door with your hand while using flat screw driver to lift and pry each tooth one at a time to disengage door from sliding track.
-
Rotate bottom of sliding door inwards.
-
Pull entire sliding door up vertically to disengage top of door from upper sliding track. Door is now completely separated from cover.
-
To unlock the dispenser, insert key into lock and rotate the key a quarter turn. Gently pull the cover forward. The key may be removed at this point. The cover will automatically open, do not force.
-
Locate the locking features on the faceplate on the inside cover. Release the faceplate by lifting on the release lever (red) and pushing up on the push tab (blue). Brace the underside of the faceplate.
-
After the faceplate is released, remove it by taking it out from under the cover. Make sure to brace the underside of the faceplate so it doesn’t fall to the floor once released.
-
Close the cover completely and make sure it locks shut.
-
Align the locking features on the new faceplate (red) to the corresponding slots on the dispenser front face (blue). Push the new faceplate up against the dispenser and slide it up to slot it into the locking features.
-
Center sliding door in middle of dispense opening. Align sliding door to upper sliding track.
-
Rotate sliding door to snap it securely into upper track.
-
Slide door to left side of dispenser to align 3 teeth of sliding door to 3 notches on sliding track. Gently push sliding door to engage the bottom sliding track, allowing the door to snap fully into secured position.
-
Test sliding door left and right to make sure door slides smoothly.
Legal
®/™ Trademarks of Kimberly-Clark Worldwide, Inc. or its affiliates. © KCWW
®/™ Marques de commerce de Kimberly-Clark Worldwide,© KCWW
Parts made in Mexico and China, Assembled in Mexico
Distributed in the U.S. by Kimberly-Clark Global Sales, LLC, Roswell, GA
30076-2199
Distributed in Canada by Kimberly-Clark Inc., Mississauga, Ontario L5B 3Y5
Kimberly-Clark Europe Limited, Walton Oaks, Dorking Road, Tadworth, Surrey,
KT20 7NS, UK
www.kcprofessional.co.uk +44 (0) 1737
736000
References
- kcprofessional.co
- Washroom, Safety & Wiping Products Workplaces Trust | Kimberly-Clark Professional
- Restroom, Safety & Wiping Products Workplaces Trust | Kimberly-Clark Professional
- Washroom & Wiping Products Workplaces Trust | Kimberly-Clark Professional
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>