FORTIN 63991 2005 Dodge Magnum Regular Key Remote Starters and Alarm Systems Installation Guide

REV.: 20211110
Guide # 63991
STAND ALONE & THAR-CHR5 INSTALLATION VEHICLE YEARS
DODGE
2005-2007 SRT 2005-2008

ADDENDUM – SUGGESTED WIRING CONFIGURATION

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.
Vehicle functions supported in this diagram (functional if equipped)

• Immobilizer bypass
• Lock
• Unlock
• Arm
• Disarm
• Hatch (open)
• Parking Lights
• Tachometer
• Trunk Status
• Hand-Brake Status
• Foot-Brake Status
• OEM Remote monitoring

FIRMWARE VERSION
74.[39] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Program bypass option IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
Program bypass option (If equiped with OEM alarm):

Parts required (Not included)
WIRE TO WIRE DIAGRAM
1x 7.5 Amp. fuse
1x Resistor 2.5K ohm
1x Fusible 7.5 Amp.
1x Resistance 2.5K ohm
THARNESS DIAGRAM
THARNESS THAR-CHR5
1x THAR-CHR5
1x Resistor 2.5K ohm
1x THAR-CHR5
1x Resistance 2.5K ohm

MANDATORY INSTALL

* HOOD PIN CONTACT

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
A11 OFF NON
Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
This guide may change without notice. See www.fortin.ca for latest version.

PARTS REQUIRED (NOT INCLUDED)

1x FLASH LINK UPDATER, 1x FLASH LINK MANAGER
SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet
OR
1x FLASH LINK MOBILE
1x FLASH LINK MOBILE APP
Smartphone AndroId or iOS with Internet connection (provider charges may apply).
MANDATORY
HOOD PIN
CONTACT
REMOTE START SAFETY OVERRIDE SWITCH

VALET SWITCH COMMUTATEUR VALET
Part #: RSPB available, Sold separately.
Notice: the installation of safety elements are mandatory. The hood pin and the valet switch are essential security elements and must be installed.

STAND ALONE CONFIGURATION

| Program bypass option OEM Remote Stand Alone Remote Starter:
---|---
| Program bypass option with oem remote:
| Program bypass option with RF KIT antenna:
UNIT OPTION| DESCRIPTION
---|---
D1.10
| By default, LOCK, LOCK, LOCK
D1.1| LOCK, UNLOCK, LOCK
C1| OEM Remote Monitoring
H1 to H6| Supported RF Kits and select RF Kit

REMOTE STARTER FUNCTIONALITY

| All doors must be closed.
---|---
| Press the OEM remote’s Lock button 3x to remote-start (or remote-stop) the vehicle.
| The vehicle will START.

REMOTE STARTER DIAGNOSTICS
MODULE RED LED
x2 flash :Brake ON
x3 flash :No tach
x4 flash : Ignition before start
x5 flash :Hood Open

REMOTE STARTER WARNING CARD

CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.
WARNING
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.

AUTOMATIC TRANSMISSION WIRING CONNECTION

Driver kick panel
Vehicle Ignition connector Back view
Key cylinder
Vehicle transponder connector Back view
CAUTION
TAKE CARE WHEN DISCONNECTING THE HARNESS FROM THE
IGNITION BARREL. IT IS VERY FRAGILE AND CAN EASILY BREAK.

THAR-CHR5

Driver kick panel
Vehicle Ignition connector Back view
Vehicle transponder connector Back view
CAUTION
TAKE CARE WHEN DISCONNECTING THE HARNESS FROM THE IGNITION BARREL. IT IS VERY FRAGILE AND CAN EASILY BREAK.

PROGRAMMING PROCEDURE

Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector). ‘-‘The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

Release the programming button when the LED is BLUE.
It the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.

Insert the required remaining connectors.

Turn the key to the Ignition ON/RUN position. LThe BLUE LED will flash rapidly.
Turn the key to the OFF position. LiThe BLUE LED will flash rapidly.
With OEM remote Press the LOCK button on the vehicles OEM remote. Or
Without OEM remote Press and release the programming button on the module once

the BLUE LED will trun off.

The module is now programmed. Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

REMOTE STARTER FUNCTIONALITY

| All doors must be closed.
---|---
| Remote start the vehicle.
| Unlock the doors with the remote-starter remote or the OEM remote.
| Insert and Turn the key to the Ignition ON/RUN position.
| Press the brake pedal.
| The vehicle can now be put in to gear and driven.

Module label   www.fortinbypass.com

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING

The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>