FORTIN THAR-TOY6 T Harness for Audi Vehicles Installation Guide

FORTIN THAR-TOY6 T Harness for Audi Vehicles

Product Specifications

• Model: EVO-ONE
• Vehicle Compatibility: Lexus RC F Push-to-Start 2017-2024
• Manufacturer: Fortin
• Firmware Version: 79.[66]
• Required Compatible Module with QR Code on the Label
• Manufactured after: 2019

Installation

1. Ensure you have the necessary compatible module with the correct firmware version.
2. Follow the wiring diagram provided in the manual for proper installation.
3.  Mandatory installation of the hood pin switch for remote start functionality.
4.  Security sticker included to emphasize the need for installation by a qualified technician.

THAR-TOY6 THARNESS INSTALLATION INSTALLATION HARNAIS THAR-TOY6

NOTES
NO KEY TAKEOVER

The module will shut down the vehicle as soon as the drivers door is opened.
**The vehicle’s OEM remote and SmartKey are still operable during remote start.

MANDATORY INSTALL

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) A11
MUST BE INSTALLED IF THE VEHICLE CAN BE

REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

SECURITY STICKER

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A  QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

ECU, Driver’s side

AUTOMATIC TRANSMISSION WIRING CONNECTION

DECRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

1x FLASH LINK UPDATER,
1x FLASH LINK MANAGER

SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

KEY BYPASS PROGRAMMING PROCEDURE 2/2

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our website on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
www.fortinbypass.com

Documents / Resources

| FORTIN THAR-TOY6 T Harness for Audi Vehicles [pdf] Installation Guide
THAR-TOY6 T Harness for Audi Vehicles, THAR-TOY6, T Harness for Audi Vehicles, Audi Vehicles, Vehicles, T Harness
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>