FORTIN F250 Addendum Suggested Wiring Configuration Instruction Manual

June 2, 2024
FORTIN

FORTIN F250 Addendum Suggested Wiring Configuration

FORTIN-F250-Addendum-Suggested-Wiring-Configuration-
PRODUCT

Product Information

  • Specifications:
    • Product Name: Immobilizer Bypass System
    • Model: EVO-ONE
    • Compatibility: Ford F250 / F350 / F450 / F550 vehicles, Push-to-Start 2023
    • Manufactured Year: After 2019
    • Required: Compatible module with firmware version 58.[05] or higher

Product Usage Instructions

  • Program Bypass Option:
    • To program the bypass option:
    • Ensure the firmware version is 58.[05] or higher.
    • Use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately) to add firmware versions and options.
  • Remote Start Option:
    • To enable remote start with OEM remote:
    • Set Function A11 to OFF for Hood Status if the remote starts with the hood open.
    • Press the lock button on the OEM remote 3 times to initiate remote start.
    • Hood Pin Contact Installation:
    • The Hood Pin switch must be installed to allow remote start if the hood can be opened.
    • Connect the following wires for installation:
    • Yellow In – AA11
    • Purple Out – AA22
    • Purple/White Out – AA33
    • Security Sticker Warning:
    • This module must be installed by a qualified technician to avoid damage to the vehicle.
    • The remote start will not operate if certain conditions are not met, including hood status, engine light status, fuel level, and battery voltage.

FAQs

  • Can I install the Immobilizer Bypass System myself?
    • No, it is recommended to have a qualified technician install it to prevent any damage to the vehicle.
  • How do I know if my vehicle is compatible with this system?
    • This system is compatible with Ford F250, F350, F450, and F550 vehicles manufactured after 2019 with Push-to-Start functionality.

AUTOMATIC TRANSMISSION

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES

  • Vehicle functions supportedFORTIN F250-Addendum-Suggested-Wiring-Configuration-FIG-1 \(1\) FORTIN F250-Addendum-Suggested-Wiring-Configuration-FIG-1 \(2\)

NOTES

  • The vehicle’s OEM remote will still be operable during remote start.

MANDATORY INSTALL

  • HOOD PIN
    • HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF.
  • SECURITY STICKER
    • Notice:
    • The installation of safety elements is mandatory. The hood pin and the sticker are essential security elements and must be installed.
    • THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

THE REMOTE START WILL NOT OPERATE IF

FORTIN F250-Addendum-Suggested-Wiring-Configuration-FIG-1
\(5\)

CAUTION

FORTIN F250-Addendum-Suggested-Wiring-Configuration-FIG-1
\(6\)

WIRING CONNECTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

FORTIN F250-Addendum-Suggested-Wiring-Configuration-FIG-1
\(7\) FORTIN F250-Addendum-Suggested-
Wiring-Configuration-FIG-1 \(8\)

DCRYPTOR PROGRAMMING PROCEDURE

FORTIN F250-Addendum-Suggested-Wiring-Configuration-FIG-1
\(9\) FORTIN F250-Addendum-Suggested-
Wiring-Configuration-FIG-1 \(10\)FORTIN F250-Addendum-Suggested-Wiring-Configuration-FIG-1
\(11\)FORTIN F250-Addendum-Suggested-
Wiring-Configuration-FIG-1 \(12\)

REMOTE STARTER PROGRAMMING PROCEDURE

FORTIN F250-Addendum-Suggested-Wiring-Configuration-FIG-1
\(13\)

REMOTE STARTER FUNCTIONALITY

FORTIN F250-Addendum-Suggested-Wiring-Configuration-FIG-1
\(14\)

Module labe

Notice:

  • Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly.
  • We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.

WARNING

  • The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
  • It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used.
  • FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever for the accuracy or currency of the information supplied.
  • The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way.
  • Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects.
  • This module must be installed by a qualified technician.
  • The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
  • Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

FORTIN User Manuals

Related Manuals