FORTIN EVO-ALL Immobilizer Bypass Module Installation Guide

FORTIN EVO-ALL Immobilizer Bypass Module

THAR-TOY13 THARNESS INSTALLATION

ADDENDUM – SUGGESTED WIRING CONFIGURATION

NOTES

• The vehicles OEM remote and SmartKey are still operable during remote start.

NO KEY TAKEOVER

MANDATORY INSTALL

HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF.

CONTACT DE CAPOT

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

This guide may change without notice. See www.fortin.ca for latest version.

WIRING CONNECTION

DECRYPTOR PROGRAMMING PROCEDURE

• Press and hold the programming button: Connect the 4-PIN Data-link connector.
  • The BLUE, RED, YELLOW, and BLUE & RED LEDs will alternatively illuminate.
• Release the programming button when the LED is BLUE.
• If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.
• Insert the required remaining connectors.
• Do not press the brake pedal. Press the Push-to-Start button twice to turn on the ignition.
  • Wait for the BLUE LED to flash rapidly and constantly.
• Press the Push-to-Start button once to turn off the ignition.
  • The BLUE LED will turn off.

KEY BYPASS PROGRAMMING PROCEDURE 2/2

REMOTE STARTER / ALARM VERIFICATION PROCEDURE

• The module is now programmed.
• Test the remote starter.

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.
• Remote start the vehicle.
• Unlock the doors with either:
  • The OEM remote
• The remote-starter remote
• Or the proximity of remote
• The module will shut down the vehicle as soon as the driver’s door is opened.
• Enter the vehicle with the Smart-Key.
• Press the brake pedal.
• Press the Push-to-Start button to start the vehicle.
• The vehicle can now be put into gear and driven.

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our website regularly. We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever on the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly, or in any other way. Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by a qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357) 1-877-336-7797

ADDENDUM GUIDE

• www.fortinbypass.com

Product Specifications

• Model: EVO-ALL
• Compatibility: Lexus LC 500, LC 500C (Push-to-Start 2020-2024, Push-to-Start 2021-2024)
• Firmware Version: 79.[66]
• Manufactured After : 2019
• Minimum Requirements: QR Code on the Label

Frequently Asked Questions (FAQ)

Q: What should I do if my vehicle is not equipped with a functional hood pin?
A: In this case, program the bypass option D6 and set function A11 to OFF for vehicles that can be remote-started with the hood open.

Q: Is the hood pin switch essential for installation?
A: Yes, the hood pin switch is a crucial security element that must be installed for proper operation. Failure to install it may lead to issues with remote starting functionality.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>