FORTIN 2020 EVO ALL Push Button Remote Starters and Alarm Systems Installation Guide
- June 5, 2024
- FORTIN
Table of Contents
FORTIN 2020 EVO ALL Push Button Remote Starters and Alarm Systems
Product Information
Specifications
- Model: EVO-ALL
- Compatibility: Lexus ES250 Push-to-Start 2019-2024
- Firmware Version: 79.[66]
- Manufacturer Date: After 2019
Product Usage Instructions
Installation Requirements
It is mandatory to install the hood pin switch for proper functionality.
For vehicles that can be remote started with the hood open, set function A11
to OFF.
Wiring Connection
Refer to the provided wiring connection guide for proper installation.
Ensure all connections are secure and follow the instructions carefully.
Safety Precautions:
Installation of safety elements like the hood pin is essential for security
purposes. This module must be installed by a qualified technician to avoid any
damage to the vehicle.
Frequently Asked Questions (FAQ)
-
Q: Is the installation of the hood pin switch mandatory?
A: Yes, for proper functioning and safety, the installation of the hood pin switch is mandatory. -
Q: Can the module be installed by anyone?
A: No, this module must be installed by a qualified technician to prevent any damage to the vehicle.
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
Vehicle functions supported in this diagram (functional if equipped)
NOTES
The vehicles OEM remote and SmartKey are still operable during remote start.
Parts required (Not included)
1X Diode
DESCRIPTION
ECU, Driver’s side
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
KEY BYPASS PROGRAMMING PROCEDURE 2/2
REMOTE STARTER FUNCTIONALITY |
Module labe
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>