FORTIN F-250 EVO-ALL Alone Add On Remote Start Car Instruction Manual
- May 15, 2024
- FORTIN
Table of Contents
FORTIN F-250 EVO-ALL Alone Add On Remote Start Car
Product Information
- Specifications:
- Model: EVO-ALL
- Compatibility: Ford F-250, F-350, F-450, F-550, F-600 vehicles without Keyless entry
- Manufactured after: 2019
- Firmware Version: 71.[56] (Minimum)
Product Usage Instructions
- Installation Requirements:
- A hood pin switch must be installed for remote start functionality.
- Safety elements are mandatory for installation.
- Installation must be carried out by a qualified technician to avoid vehicle damage.
- Programming Bypass Option:
- If the vehicle is not equipped with a functional hood pin, program the bypass option.
- Parts Required (Not Included):
- 2x Vehicle key for programming
- 2x Diode 1Amp
- 1x Relay (Key Bypass)
- Software Requirements:
- Flash Link Updater or Flash Link Mobile tool for firmware updates and options (sold separately)
- Microsoft Windows Computer with an Internet connection or Flash Link Mobile App on Android/iOS smartphone for programming
- RF Kit Requirement:
- RF kit required for remote starter functionality (sold separately).
- Operating Instructions:
- The vehicle can be started by pressing the lock button on the OEM remote 3 times consecutively or through a smartphone.
- Turn on the safety switch under the dashboard before any maintenance work.
FAQs
- Q: Is the hood pin switch mandatory for installation?
- A: Yes, the hood pin switch is essential for remote start functionality and must be installed.
- Q: Can I program the bypass option without the Flash Link Updater?
- A: No, to add firmware version and options, the Flash Link Updater or Flash Link Mobile tool is required.
STAND ALONE INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES. 
Parts required
- Parts required (Not included)
- 2x Vehicle key for programming
- 2x Diode 1Amp
- 1x Relay (key Bypass)
NOTES
- RF kit required (sold separately)
MANDATORY INSTALL
- HOOD PIN HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF.
- Notice: the installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.
- THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
PARTS REQUIRED (NOT INCLUDED)
- 1x FLASH LINK UPDATER,
- 1x FLASH LINK MANAGER SOFTWARE | PROGRAMME
- 1x Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet
- 1x FLASH LINK MOBILE
- 1x FLASH LINK MOBILE APP
- 1x Smartphone AndroId or iOS with Internet connection (provider charges may apply).
MANDATORY
- HOOD PIN: REMOTE START SAFETY OVERRIDE SWITCH
- Part #: RSPB available, Sold separately.
- Notice: The installation of safety elements is mandatory. The hood pin and the valet switch are essential security elements and must be installed.
STAND ALONE CONFIGURATION
- Program bypass option:
- UNIT OPTION /DESCRIPTION
- D1 /Standalone enable
- Program bypass option with RF KIT antenna:
- UNIT OPTION OPTION UNITE /DESCRIPTION
- H1 to H6 /Supported RF Kits and select RF Kit
FUNCTION
REMOTE STARTER FUNCTIONALITY
REMOTE STARTER WARNING CARD
- CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately
- WARNING: REMOTE STARTER
- THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
- Parts required (not included)
- 1x FLASH LINK UPDATER,
- 1x FLASH LINK MANAGER SOFTWARE | PROGRAMME
- 1x Microsoft Windows Computer with Internet connection 1x Ordinateur Microsoft Windows avec connection Internet
- 1x FLASH LINK MOBILE
- 1x FLASH LINK MOBILE APP
- 1x Smartphone Android or iOS with Internet connection (Internet provider charges may apply)
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
OPTIONAL RF-KIT PROGRAMMING
PROGRAM BYPASS OPTION
-
Program bypass option: H2
-
☑Supported RF-KITS enable
-
☑ H2 Fortin 2
-
OPTIONAL FORTIN RF KIT SERIES 4 OR SERIES 9 PROGRAMMING
REMOTE STARTER FUNCTIONALITY
Module label
Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly. We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.
WARNING
- The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
- It is the sole responsibility of the installer to check and verify any circuit before connecting to it.
- Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever for the accuracy or currency of the information supplied.
- The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or in any other way.
- Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects.
- This module must be installed by a qualified technician.
- The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
- Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
CONTACT
- TECH SUPPORT
- Tél: 514-255-HELP (4357) 1-877-336-7797
- www.fortinbypass.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>