GLOBAL INDUSTRIAL 436986 Portable Power System User Manual

436986 Portable Power System

“`html

Specifications:

• Nominal Power: 500W

• Peak Power: 1KW

• Battery Parameters: LiFePO4 22.4V 25AH

• Product Size: 16.81 x 11.30 x 10.04 inches (427 x 287 x
  255mm)

• Product N.W.: Not specified

• Ambient Temperature Range: Not specified

• Transport and Storage Environment: Not specified

Product Usage Instructions:

1. Product Main Structure Composition:

The portable power station is mainly composed of a metal shell,
inverter, LCD display, charger, and LiFePO4 battery.

2. Panel Function Description:

• Front Panel: Output, LCD Display, Overload
  Screen, Protector Power, GFCI Reset

• Left Side: Cooling Window, Handle

• Right Side: USB Output, AC Charging Input
  Socket, Ground Post

3. Display Interface Description:

• Power Bar: Indicates power level
• Power Percentage: Shows battery
  percentage

4. Operation and Usage:

Steps for the First Start of Portable Power
Station:

1. Check for any visible damage to the appearance of the station
   and ensure the output interfaces are intact.

2. Fix the grounding post to the ground.

3. Press the POWER button on the front panel. If the green light
   comes on, it indicates successful startup.

4. Observe the screen to check if the battery is fully charged. If
   the battery level is below 30%, it is recommended to fully charge
   it before use.

FAQ:

Q: Can this portable power station be used outdoors?

A: No, this device is intended for indoor use only. Do not use
it outdoors.

Q: How long does it take to charge the battery using mains

charging?

A: Charging time using mains charging is approximately 3.5
hours.

“`

b82045fc-0b136962-90871f19-f891407c

TM
TM

User’s manual Customer Service US: 1-800-645-2986

Manual del usuario Servicio de atención al Cliente
US: 1-800-645-2986

Manuel de l’utilisateur Service à la clientèle
Canada: 888-645-2986

Lithium Iron Phosphate Portable Power Station
Model: 436986

Read the instructions carefully before use and follow the instructions pertaining to risk of fire, electric shock, or injury to persons. Keep these instructions in a safe location for future reference. For questions, visit globalindustrial.com or contact Customer Service at 1-800-645-2986

WARNINGS & PRECAUTIONS
· Different electrical appliances have different voltage standards. Before use, please carefully check whether the rated voltage range of the product is consistent with the voltage range of the portable power station, otherwise, it may lead to dangerous situations.
· After the battery is discharged to the cut-off voltage, continuing to discharge is called overdischarge. It can easily cause serious power loss in the battery, thereby greatly shortening its service life. Therefore, deep discharge should be avoided as much as possible when using the battery. And do charge in time.
· The product should be kept away from fire, hightemperature environments, and humid and rainy environments during use and storage, otherwise it may lead to dangerous situations.
· This product has a built-in high-voltage power supply, and non-professionals should not disassemble it by themselves. 1

· DO NOTdiscard the product at the end of its service life. Recycle the product according to local laws and regulations.
· This product should be protected from rain, water immersion, and violent vibration during transportation.
· It cannot be used at an altitude exceeding 2000m.
· The product is AC output. Please do not insert your hands or hand-held metal conductors into the AC socket.
· DO NOT drop, squeeze, or collide with the product, so as not to subject the product to external pressure, which may cause a short circuit of the internal circuit of the product and damage to the battery.
· After use, please turn off the machine in time (the no-load power consumption will continue to consume battery power when the machine is on.)

b82045fc-0b136962-90871f19-f891407c

LiFe PO4 Portable Power Station 436986

User’s Manual

WARNINGS & PRECAUTIONS
· This product and its accessories may contain some small parts. Please keep the product and its accessories out of the reach of children. Children may accidentally damage the product and its accessories, or swallow small parts, causing suffocation or other dangers, children or people with mental retardation need to use this product accompanied by their guardians.
· DO NOT use the product during thunderstorms. This may cause product failure or electric shock.

· If the product accidentally falls into the water during use, place it in a safe open area and do not turn it on again.
· Please use the charging cable provided with the product to charge it, otherwise there will be a security risk.
· The product must be securely and effectively grounded before use.

IMPORTANT SAFETY INSTRUCTIONS
Appliance coupler is used as the isolation means to isolate from the supply mains. DO NOT position the equipment to a location so that it is difficult to operate the disconnection device.
· Read All the instructions before using the product.
· To reduce the risk of injury, CLOSE SUPERVISION is necessary when the product is used NEAR CHILDREN.
· Do Not put fingers or hands into the product.
· Use of an attachment not recommended or sold by power pack manufacturer may result in a risk of fire, electric shock, or injury to persons.
· To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.
· DO NOT use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
· DO NOT disassemble the power pack, take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.

· To reduce the risk of electric shock, unplug the power pack form the outlet before attempting any instructed servicing.
· When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way.
· Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
· DO NOT expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 130°C(of 265°F) may cause explosion.
· Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
· Risk of Electric Shock. NEVER use power pack to supply power tools to cut or access to live parts or live wirings, or materials that may contain live parts or live wirings inside, such as building walls, etc.
· DO NOT operate the power pack with a damaged cord or plug, or a damaged output cable.

SAVE THESE INSTRUCTIONS
2

b82045fc-0b136962-90871f19-f891407c
LiFe PO4 Portable Power Station 436986
IMPORTANT SAFETY INSTRUCTIONS

User’s Manual

Grounding Instructions

· This product MUST be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes ordinances.
CAUTION
· Risk of Injury To Persons. DO NOT use this product if the power cord or the battery cables are damaged in any way.
· Risk of Electric Shock. Connect ONLY to properly grounded outlets.
· This device is not intended for use in a commercial repair facility.
· Risque de blessure aux personnes. Ne pas utiliser ce produit si le cordon d’alimentation ou les câbles de batterie sont endommagés de quelque façon.
· Risque de décharge électrique. Brancher l’unité uniquement à des prises de courant correctement mises à la masse.
· Le dispositif n’est pas destiné à être utilisé dans un atelier de réparation commercial.

WARNING
Improper connection of the equipment grounding conductor is able to result in a risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the product is properly grounded. DO NOT modify the plug provided with the product ­ if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
· DO NOT overcharge the internal battery. See Instruction Manual.
· DO NOT smoke, strike a match, or cause a spark in the vicinity of the power pack.
· ONLY charge the internal battery in a well ventilated area.
· Ne pas surcharger la batterie interne. Consulter le manuel d’utilisation.
· Il ne faut pas fumer, allumer une allumette ou produire des étincelles à proximité du bloc d’alimentation.
· Charger la batterie uniquement dans un endroit bien aéré.
DANGER
This device is intended to be used indoors only. Do not use outdoors.
Le dispositif est destiné à être utilisé à l’intérieur seulement. Ne pas l’utiliser à l’extérieur.

Moving and Storage Instructions
· The user can hold handles on both sides to move the product; · The product needs to be stored away from fire and humid environments. The ambient
temperature should be 5°F-131°F (-15-55); the relative humidity 93% without condensation and the atmospheric pressure from 70kPa to 106kPa.
SAVE THESE INSTRUCTIONS
3

b82045fc-0b136962-90871f19-f891407c
LiFe PO4 Portable Power Station 436986
Technical Parameters

User’s Manual

Item Nominal Power Peak Power Battery Parameters Product Size Product N.W.
Ambient Temperature Range
Transport and Storage Environment

Parameter
500W
1KW
LiFePO4 22.4V 25AH
16.8111.3010.04inch (427287255mm)
30.42LBS (13.8KG) 32°F-104°F (0-40) Relative Humidity:80% Altitude2000M
Temperature: 5°F-131°F (-15-55) Relative Humidity93% (No Condensation) Atmospheric Pressure: 70kPa106kPa

PV Charging

No

Input

Mains Charging 110-120V 50/60Hz 178W

Output

USB-AOutput USB-COutput AC Output

PV Charging Charging Time
Mains Charging

PD20W
PD20W 3*American Standard three-hole Sockets 110V 60Hz No
About 3.5H

Note: The product is equipped with an internal charger.

Package Contents
· Portable Power Station1 · Product Manual1 · Charging Cable*1

4

b82045fc-0b136962-90871f19-f891407c

LiFe PO4 Portable Power Station 436986

User’s Manual

Product Use and Function Instruction
Application and Function Introduction: The portable power station transforms LiFePO4 DC to AC pure sine wave by inverter. When the product is out of power or finished using, it can be charged by mains, without which this product can output AC to charge devices with corresponding power such as fridges, computers, and printers. With two handles on the left and right side, the product appears easy to move. Also, the 2-inch high-resolution LCD on the product displays battery power and charging status. What’s more, the AC output sockets are installed with an overload protector. The product is equipped with protective functions like output overload, short circuits, and over- temperature.
Product Main Structure Composition
The portable power station is mainly composed of a metal shell, inverter, LCD display, charger and LiFePO4 battery.

Panel Function Description
Front Panel

Output LCD Overload Screen Protector

Power
5

GFCI Reset

b82045fc-0b136962-90871f19-f891407c
LiFe PO4 Portable Power Station 436986
Left Side

User’s Manual

Cooling Window Handle

Right Side
USB Output AC Charging Input Socket

Ground Post
6

Cooling Window
AC Output USB/AC Output Switch
Cooling Window

b82045fc-0b136962-90871f19-f891407c

LiFe PO4 Portable Power Station 436986

User’s Manual

Disaply Interface Description

Power Bar

Power Percentage

7

b82045fc-0b136962-90871f19-f891407c

LiFe PO4 Portable Power Station 436986

User’s Manual

Operation and Usage

1. Steps for the First Start of Portable Power Station:

1. Check whether there is any visible damage to the appearance of the station and whether the output interfaces are loose or damaged (If abnormal conditions occur, stop using)
2. Fix the grounding post to the ground. 3) Press the “POWER” button on the front panel, and if the green light comes
   on, it indicates that the startup has been successful. Observe the screen to see whether the battery is fully charged. When the battery level is below 30%, it is recommended to fully charge it before use.
   2. Charging Steps:

AC charging: First, confirm whether the mains grid voltage and frequency are within the range of mains charging input parameters of this product. Second, confirm that there is no load on the AC output socket, and plug one end of the AC charging cable in the accessory into the charging socket on the back of the power station, and the other one end into the mains power socket. Then, check whether the battery bar on the LCD is still bouncing (If bouncing, it means that the product is charging).

3. AC Output On-load Usage:
AC on load: Before use, please check that the power range and voltage range of the on-load electrical equipment should match the output parameters of the station. Insert the power plug of the loaded product into the output socket of the power station, and turn on the power switch. Then the loaded device would normally work.
4. USB Output On-load Usage:
Before using the power station, please check that the voltage and the corresponding parameter range of the on-load electrical device are consistent with the power station. Insert the interface of the on-load electrical device into the corresponding USB interface, and turn on the power switch. Then the loaded device would normally work.

8

b82045fc-0b136962-90871f19-f891407c
LiFe PO4 Portable Power Station 436986
Product Maintenance

User’s Manual

1. Newly products should be fully charged before use. 2. Regularly remove dust and dirt from the heat dissipation window. 3. In the case of long-term storage for more than three months, not less than 50% of the
power storage shall be maintained. 4. If stored for more than 6 months, please charge and discharge the product 1-2 times.

Common Troubleshooting

Issue
Unable to Perform Mains Charging
Unable to Perform AC Load

Suggested Action
· If the mains input voltage range exceeds the parameter range of the power station, it cannot be charged.
· Check whether the specifications of the charging cable are consistent with those equipped with this power station and check whether there is an open circuit.
· Check whether the power button is on. · Confirm whether the power of the load appliance is
within the normal load range of the power station.

USB/DC No-output

· Check whether the power button is on. · Check whether the load connection line is on open
circuit phenomenon. · Check if the output interface is fully inserted and
firmly connected.

After turning on the main power switch of the power station, the product cannot start normally and the display screen doesn’t work

In this case, it should be considered that the product battery may be out of power, the internal reverse controller cannot be started, and the battery enters a state of power loss sleep. You can first access the mains to charge the product and activate it. When the battery is fully charged, it can be used.

Why does the output

The product is set to turn off the output when the battery

shut off when the battery power is 10%. This is to protect the battery cell from

is discharged to 10%? over-discharge. When this situation occurs, the battery

should be charged immediately.

9

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>