FORTIN LC 500C Lexus Remote Starters and Alarm Systems Installation Guide
- June 5, 2024
- FORTIN
Table of Contents
FORTIN LC 500C Lexus Remote Starters and Alarm Systems
Vehicle functions supported in this diagram (functional if equipped)
NOTES
The vehicles OEM remote and SmartKey are still operable during remote start.
MANDATORY INSTALL
Notice: the installation of safety elements is mandatory. The hood pin and the sticker are essential security elements and must be installed. THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN.
A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
WIRING CONNECTION
DECRYPTOR PROGRAMMING PROCEDURE
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
KEY BYPASS PROGRAMMING PROCEDURE 2/2
- Disconnect all connectors and after the 6-pin (Main-Harness) or the 4-pin Data-link connector.
- Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
- Parts required (not included)
- AFTER DCRYPTOR PROGRAMMING COMPLETED
- Go back to the vehicle and reconnect the 6-pin (MainHarness) or the 4-pin (Data-Link) connector and after all the remaining connectors.
REMOTE STARTER
REMOTE STARTER PROGRAMMING PROCEDURE
- REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE
- MODULE FOR THE REMOTE STARTER PROGRAMMING.
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly. We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer-safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever about the accuracy or currency of the information
supplied. The installation in every case is the sole responsibility of the
installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no
liability or responsibility whatsoever resulting from any type of
installation, whether performed properly, improperly or in any other way.
Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by a qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357) 1-877-336-7797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>