FORTIN 2023 Ford Remote Starters with Keyless Key and Alarm Systems Installation Guide

June 1, 2024
FORTIN

FORTIN 2023 Ford Remote Starters with Keyless Key and Alarm Systems

Product Information

  • Specifications:
    • Model: EVO-ALL
    • Compatibility: Ford F250 / F350 / F450 / F550 (2023 models)
    • Firmware Version: 58.05
    • Manufacturer Date: 02/2019

Product Usage Instructions

  • Installation Requirements:
    • For vehicles without a functional hood pin, the hood trigger must be set to OFF (Option A11).
    • The hood pin switch must be installed for proper operation.
    • Ensure that safety elements, including the hood pin, are installed correctly as they are mandatory for security.
  • Operating Instructions:
    • The remote start will not operate if:
    • The hood is open or the switch is not present
    • The Check Engine light is ON
    • The Low fuel light is ON
  • The vehicle battery voltage is too low
    • Caution: The remote start is limited to two consecutive Start or Stop commands. Ignition must be turned ON and OFF to use the remote again.
  • Connections:
    • Refer to the provided diagram for proper connections of the various components.
    • Always ensure a direct connection with the data link.

FAQs

  • Q: What should I do if the remote start is not working?
    • A: Check if the hood is open, the Check Engine light is ON, the Low fuel light is ON, or if the vehicle battery voltage is too low. Ensure proper installation of all required safety elements.
  • Q: Can I install this module myself?
    • A: This module must be installed by a qualified technician. Incorrect connections can cause permanent damage to the vehicle.

REGULAR INSTALLATION

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.

Vehicle Functions Supported

FORTIN-2023-Ford-Remote-Starters-with-Keyless-Key-and-Alarm-Systems-FIG-1
\(1\)FORTIN-2023
-Ford-Remote-Starters-with-Keyless-Key-and-Alarm-Systems-FIG-1
\(2\)

NOTES: The vehicle’s OEM remote will still be operable during remote start.

MANDATORY INSTALL

  • HOOD PIN
    • HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF.
    • Notice: the installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.
    • THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

NOTES

  • THE REMOTE START WILL NOT OPERATE IF:FORTIN-2023-Ford-Remote-Starters-with-Keyless-Key-and-Alarm-Systems-FIG-1 \(5\)

CAUTION

  • The remote start is limited to two consecutive commands Start or Stop.
  • To use the remote again ignition must be turned ON and OFF.

WIRING CONNECTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

FORTIN-2023-Ford-Remote-Starters-with-Keyless-Key-and-Alarm-Systems-FIG-1
\(8\) FORTIN-2023
-Ford-Remote-Starters-with-Keyless-Key-and-Alarm-Systems-FIG-1
\(9\)

PROGRAMMING PROCEDURE

DECRYPTOR PROGRAMMING PROCEDURE

FORTIN-2023-Ford-Remote-Starters-with-Keyless-Key-and-Alarm-Systems-FIG-1
\(10\)FORTIN-2023
-Ford-Remote-Starters-with-Keyless-Key-and-Alarm-Systems-FIG-1
\(11\)FORTIN-2023
-Ford-Remote-Starters-with-Keyless-Key-and-Alarm-Systems-FIG-1
\(12\)FORTIN-2023
-Ford-Remote-Starters-with-Keyless-Key-and-Alarm-Systems-FIG-1
\(13\)

REMOTE STARTER FUNCTIONALITY

FORTIN-2023-Ford-Remote-Starters-with-Keyless-Key-and-Alarm-Systems-FIG-1
\(14\)

Module label

Notice:

  • Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly.
  • We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.

WARNING

  • The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
  • It is the sole responsibility of the installer to check and verify any circuit before connecting to it.
  • Only a computer-safe logic probe or digital multimeter should be used.
  • FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever about the accuracy or currency of the information supplied.
  • The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or in any other way.
  • Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects.
  • This module must be installed by a qualified technician.
  • The information supplied is a guide only.
  • This instruction guide may change without notice.
  • Visit www.fortinbypass.com. to get the latest version.
  • Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FORTIN User Manuals

Related Manuals