FORTIN 2024 Hyundai Kona Push to Start Remote Starters and Alarm Systems Installation Guide
- June 5, 2024
- FORTIN
Table of Contents
FORTIN 2024 Hyundai Kona Push to Start Remote Starters and Alarm Systems
Product Information
Specifications
- Model: EVO-ONE
- Compatibility: Hyundai Kona vehicles with push-to-start feature manufactured after 2019
- Firmware Version: 91.06
- Required Parts: 2X Diodes, Hood Pin Switch
Product Usage Instructions
Installation Requirements
- Ensure the vehicle is compatible with the EVO-ONE module.
- Install the Hood Pin Switch to enable remote start with the hood closed.
- Installation must be done by a qualified technician to avoid damage to the vehicle.
Wiring Connection Guide:
Refer to the provided wiring diagram for proper connection of the EVO-ONE
module.
Programming Options
- Program the hood trigger for output status using the designated options.
- Enable the OEM remote standalone function for remote start by pressing the lock button three times.
Mandatory Steps
- Use the Flash Link Updater or Flash Link Mobile tool to add firmware version and options.
- Install 2X Diodes as per instructions for proper functionality.
Frequently Asked Questions (FAQ)
-
Q: Can I install the EVO-ONE module myself?
A: It is recommended to have the module installed by a qualified technician to prevent any damage to the vehicle due to incorrect connections. -
Q: What should I do if my vehicle can be remote started with the hood open?
A: Install the Hood Pin Switch and set function A11 to off to prevent remote starting with the hood open.
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
DESCRIPTION
WIRING CONNECTION
KEY BYPASS PROGRAMMING PROCEDURE
REMOTE STARTER PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE