Chargers GY-97A Quicksand Magnetic Fast Wireless Charger Dock User Manual
- June 12, 2024
- Chargers
Table of Contents
Chargers GY-97A Quicksand Magnetic Fast Wireless Charger Dock
Product introduction
This wireless charger dock has a very modern design. Wireless charging quicksand combined with light effect design, to provide you with a wireless simple lifestyle. This product can be compatible with any Qi standard mobile phone and device, and provide an absolute security guarantee.
Product Appearance
Instructions
Provide power to the charger through 9V/2A, 12V/1.67A adapters.
LED Indicator Display
product size

Applicable equipment
Smartphone
Apple: iPhone14, 14 Pro, 14 Pro Max, 14 Plus, iPhone 13, 13 Pro, 13 Pro
Max, 13 mini, 12, 12 Pro, 12 Pro Max, 12 mini, SE, 11, 11 Pro, 11 Pro Max, Xs,
Xs Max, XR, X, 8, 8 Plus.
Samsung: Galaxy Z: Fold4, Flip4, A53 5G, Flip, Flip 3. Galaxy S (23, 23+,
23Ultra, 22, 22+, 22 Ultra, 21 5G, 21+ 5G, 21 Ultra 5G, FE 5G, 20 5G, 20+5G,
21 Ultra 5G, 10, 10+, 10e, 9, 9+, 8, 8+, 7, 7 edges,6, 6
edge, 6 edge+, 6 G9209, 6 Active), Galaxy Note (10, 10e, 10+, 9, 8, 7,6, 5).
Huawei: P30 Pro, P40 Pro, P40 Pro+; Mate (40E, 40 RS, 40 Pro+, 40 Pro,
40, 30E Pro, 305G, 30 Pro 5G, 30, 30 Pro, 30 RS, 20 Pro, 20 RS, RS).
Xiaomi: 10, 10 Pro, 9, 9Pro, Mix 3, Mix 2s. Including other devices with
a wireless charging receiver built-in; (Note: All devices must meet the Qi
standard).
Parts list
- Wireless charger*1
- User manual*1
- Type-C data line*1
Product standard
- Input: 9V/2A
- Output: 5W/7.5W/10W/15W(max)
- Conversion: <77%
- ransmission distance: 2~6mm
- Product dimensions: 61.3×61.3×10.3mm
Attention
- Please do not immerse the product and isolate the liquid;
- Use in -20~+40°C temperature environment;
- Disconnect the power supply when cleaning the charge.
FCC Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation. Any Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- consult the dealer or an experienced radio/ TV technician for help.
FCC RF exposure statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm the radiator of your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>