Chargers 15W Charging Station Owner’s Manual
- June 3, 2024
- Chargers
Table of Contents
Chargers 15W Charging Station
parameters and instructions
- Product model: 15W wireless charger
- Wireless charging output : 15W/10W/7.5W/5W charging efficiency;
- Wired charging output : 10W charging efficiency
- Wireless charging standard: Compatible with WPCv1.2.4 standard;
- Wireless charging receiver: Support wireless-charging mobile phone and QI standard receiver Support 5W, Apple 7.5W, Samsung 10W charging
- Input voltage and current : DC9-12V/2-3A
- Wired USB /TYPE-C charging Power : 5V 2A, 10W IF USB and TYPE-C charging at the same time, the charging power is 5V 1A
- Working frequency: 110kHz-205kHz
- Charging distance: When using wireless charging, it needs to be placed on the front of the charger. It is recommended to contact the charger at zero distance.
- Safety protection: Built-in smart chip and software that effectively prevent from over-current, short-circuit, over-temperature etc
NOTE:
- This charging station should be kept away from high temperature (>45℃) and lowtemperature (<-20℃) environment and children.
- Please use a soft, dry cloth to clean the surface. Chemicals, soaps or detergents areforbidden.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>