Chargers C9 Wireless Charging Launch Pad User Manual
- June 3, 2024
- Chargers
Table of Contents
Chargers C9 Wireless Charging Launch Pad User Manual
Thank you for choo Sin buy’ our products, this product is a home car dual- purpose wireless charger. use Standard wireks s charging technolo7i, ccanpatibk, with Q standard wirekss charging mobile phone, with alt-skid function, It can charge di vital appliances with Di wireless charging function
Product introduction
Product parameter
| Product name: wireless charging launch pad | Product model: C9 |
|---|---|
| Wireless standard: QI standard | Wireless power: 5W/7. 5W/10W/15W |
| Input size: 5V/2A, 9V/I .67A | Conversion power 75% |
| Wireless distance: C 8mm | Product color black |
| Product size: 158758mm, | Applicable mobile phone: QI mobile phone |
Installation and use
Installation instructions
Connect the wireless charger to qc3.0 power supply and enter the power on state. If your digital product has wireless charging function, it will be charged automatically if you put it directly on the product
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Instructions for use
(1)Wireless charging According to the Qi wireless charging standard, the mobile phone body width 5 SOmm is put into the induction area of the wireless charger charge. Mobile phon es that do not me et th e Qi wireless charging standard (body width 5 SOmm) need to match the corresponding wireless charging receiver Coil, put it in the induction area of wireless charger for charging. matters needing attention
- Do not squeeze, collide or pullthe power cord hard to avoid damage to electronic components.
- Please do not disassemble or put into water or fire to avoid short circuit and leakage.
- Please use it at – 10 “C – 45 “C and store it at – 40 – 70 “C Avoid equipment failure.
- Please do not use it in severe humid or corrosive environment to avoid damaging the internal circuit of th e equipment.
- Do not put it too close to the magnetic card or magnetic card (ID card, bank card, etc.) to avoid the failure of the magnetic card.
- Please keep at least 30 cm away from implantable medical devices (such as pacemaker, cochlear implant, etc.).
- Do not let children or pets play with the equipment to avoid injury and unnecessary accidents.
- Do not place metal foreign matters on the surface of wireless charger for a long time to avoid equipment failure or heating.
- Do not use unauthorized or incompatible power adapter to avoid equipment damage or other hazards
- Please dispose of the equipment according to local regulations, and do not treat the equipment as domestic waste After sales guide
In order to ensure you get reliable after-sales service, please read the following warranty instructions carefully 1 IA) -t vr ran I tnrrete
Warranty terms
Change in seven days
Within seven days from the date of sale of th e product, if the product has performance failure and the product itself and the outer package are completely preserved Good, n o scratch, enjoy new service. Ann u al warranty If there is any non-human damage during normal use of the product within 12 months from the date of sale Performance failure, free maintenance service.
Warranty coverage
if the product fails to work or breaks down during normal use, it can enjoy after-sales service after being recognized by our company
Service commitment.
Some cases are not covered by the warranty
- Accessories are not guaranteed.
- Failure caused by improper operation of users.
- Due to accidents, man-made damage, self disassembly, unsealing and maintenance of non authorized maintenance center Repair, etc.
Note: the company will not be responsible for the damage or even danger caused by the improper operation of users Any liability
Extended maintenance
if the product exceeds the warranty period, the customer still enjoys the maintenance service and only needs to pay the cost of replacing parts and materials.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>