Chargers KP-MS15 Magnet Car Wireless Charger User Manual
- June 3, 2024
- Chargers
Table of Contents
Magnetic Car Wireless Charger
User Manual
Operating Instruction of Magnetic
-
iPhone 12 series phones with built-in magnetic or with magnetic protective case can use it directly.
-
iPhone 12 or other phones with non-magnetic protective case need to use the provided metal sheet.
Attention! Must attach the metal sheet on the center of phone, otherwise it will get heated and stop charging, need to remove the metal sheet and attach it at right place -
Non-iPhone 12 series usage
Huawei, Xiaomi, Samsung and iPhone 11 phones need to use the provided metal sheet.
Attention! Phones with protective case please attach the metal sheet on the case, otherwise the magnet can’t work. The metal sheet cannot be attached on roughness surface and silica gel materials protective case.
Specification & Function Description
Input: USB-C 5V 2A Wireless Out:5W
Input: USB-C 9V 2A Wireless Out:15W/10W/7.5W
Dimension:30（H）x68(Φ)mm
Weight:50g
How to use the air vent mount holder:
Installation of Sucking on Glass:
| Forward Installation
1.Pull up the switch
2.Put the charger on
the place you need to
stand and get out the air
3.Press down the switch
---|---
| Reverse Installation
1.Pull up the switch
2.Put the charger on
the place you need to
stand and get out the air
3.Press down the switch
| Installation of Sucking on Glass
Product Warranty Card
Warranty Period: 12 months
Thanks for using our product, we provide 12 months of free charge after-sales
service under normal usage. In order to protect your rights, please be sure to
fill in the following content truthfully and affix the dealer’s seal when
purchasing. If the product is damaged by man-made or force majeure, or the
product has expired, and the warranty card is not presented, the company
reserves the right to charge appropriate service fees at its discretion.
Product Brand:………………………………….
Product Name:………………………………….
Product Model:………………………………….
Purchase Date: ……Month….Day…..Year
If there is no purchase date filled in, the factory date shall prevail!
Dealer Signature:………………………………
Reasons for Defective:……………………..
Customer Name:……………………………..
Address:………………………………….
Contact Number:…………………………….
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.