Chargers TH03 Magnetic 4 in 1 Wireless Fast Charger Dock User Guide

Chargers TH03 Magnetic 4 in 1 Wireless Fast Charger Dock

1. Product Function

1.Wireless charging function introduction
This product realizes short distance radio transmission through magnetic induction mode, and adapts to PD protocol QC2.0 protocol double 9V 1.5A digital product charging and communication, furniture, fire, waterproof and other digital products. The product conforms to the Qi wireless charging standard. Mobile phones compatible with the Qi standard can use this product to charge, supporting the quick wireless charging function.
This product has unique appearance and wide working voltage (DC9V-12V). It is suitable for adapters that comply with PD protocol and QC protocol (PD protocol is preferred, 9V is the default value of this product when using PD adapter).

Features

maximum 15 watt output for two mobile phones (or 1 mobile phone +1 earphone) and a watch with an output of 5V 1A USB-A interface for digital products. It is perfectly compatible with apple 12 and 13. The shield position magnetic automatic absorption, no need to align position. The charging process does not slide when using mobile phones. The platform can be used for earphones, mobile phones with wireless charging function without magnetic absorption function or other digital products. Compatible with Apple Watch 1-7 generation, power adaptive (that is, the adapter automatically adjusts the output power when the power is insufficient, but the charging effect will be affected. The USB-A power is not included in the wireless charging power. That is, the maximum power of wireless charging is about 30 watts, and USB-A is 5 watts. When the adapter power is insufficient, protection disconnection charging will be carried out.)
When the device is fully charged, if the phone is not removed for a long time, the phone will keep the power at 100% (supplementary charging).

Basic Operation

Tips: The larger the deviation distance, the lower the charging efficiency. It is recommended to use QC protocol 9V 3A or PD protocol adapter and data line with current 3A or above, PD protocol adapter is preferred.

• Usage: Connect the transmitter USB cable, the product works in fast wireless charging mode, supporting double 15W load.
  If the object is iPhone 12/13 or with magnetic phone cases, there is no need to align the device with automatic adsorption and pop-up charging. If the platform position is placed at the center of the receiving coil on the mobile phone end (anti-skid ring), the center of the transmitting coil is offset from the allowable distance (±3mm). If the deviation is too large, the transmitter will not work, and the phone needs to be correctly placed again, and the device will re-enter the charging state. The watch can be placed directly in the charging position.

• Indicator Light Description: The power standby indicator (spaceman’s eyes) is on, another color is on when wireless charging is working, indicator lamp will not off when power on. FOD foreign body detection: there is a metal foreign body light flashing, and protect until the metal foreign body leaves the charging range.

• Spaceman shape: The head can be rotated from side to side at an Angle of about 30 degrees.

• Disassembly method:

  • Assembly: Aim at the base gap and press down the spaceman, and hear a click sound.
  • Disassembly: Hold one leg of the spaceman and push it up against the base with your thumb (transportation needs)

Basic Parameter

Performance Parameter

• TX Input voltage/currency ：DC 9V/2.2A
• TX Input current (no load) ：≤0-150mA （scanning runout mode）
• TX Output current： Single 15W Charging DC9V /1.67A Dual 15W Charging 9V/3.5A
• Max Output for Watch ：500mA
• Max Output for USB-A interface ：5V 1.1A
• Efficiency (full load) ：≤80%
• 15W Working Frequency ：Variable frequency 110KHz -205 KHz
• 7.5W Working Frequency： Fixed frequency 127.7KHz
• Ripple & Noise：≤200mVp_p
• Working temperature ：0-40℃
• Relative humidity： 10%~80%

Apparent Parameter

• Size： (base)168110155mm（spaceman）15614845mm
• Color： Black+White, Light Grey+White, Dark Grey+White, Red+White
• Materials： PC、ABS
• What is in the box： 1M length 3A TYPE-C cable，Bilingual manual, color box
• Input interface： TYPE-C（PD QC dual agreement） Output interface：USB-A
• Usage： desktop

Electric Character

• Average working trouble-free time: 20,000 working hours, average failure rate less than 0.5% at 25℃.
• Aging test: normal temperature, full load aging time 24H.
• No load test: output end no load, standby time 24H, electrical normal, no abnormal structure.
• Load aging: DC9V, load current I=1500mA, aging for 24H, normal electrical properties, no abnormal structure.
• Mobile phone test: the electrical property is normal, if the temperature rises, the charging current will be reduced.
• Overvoltage protection：15V
• Overcurrent protection: when the receiving output is short-circuited, the transmission is switched to intermittent detection mode.
• FOD foreign body detection: Stop power supply when metal foreign body is detected.
• 5V output current limit Max 1.2a overcurrent protection, load short circuit protection.
• Short circuit red, green and blue light flashing disconnect output until short circuit is removed

Charging range test

Automatic positioning adsorption of mobile phones, accurate docking and quick charging.
The charging position of the platform is ±3MM, and the watch is magnetically charged without alignment

Sensitivity Test

• The first power on needs to wait for the light flashing, the host program start about 3 seconds.
• Automatic adsorption mobile phone, accurate docking and quick charging, response time is about 2 seconds, different brands of mobile phone slightly different.
• The response time of the watch charging is about 3 seconds (it depends on the electric quantity and the temperature of the watch)

Reliability Test

• High temperature storage test: the test temperature is 85℃±2℃, and the continuous test time is 4H. After the test, the appearance and electrical properties are normal after being placed at room temperature for 4H.

• Low temperature storage test: the test temperature is -10℃±3℃, and the continuous test time is 4H. After the test, the appearance and electrical properties are normal after being placed at room temperature for 4H.

• High and low temperature cycle test (impact) : the test temperature is 85℃±2℃, the humidity is 90%-95%, the duration of the experiment is 1H, the low temperature is
  -10℃, the time is 1H, 6 cycles, after the test, the appearance and electrical properties are normal at room temperature for 4H.

• High temperature working test: temperature 60℃, humidity 95%, working for 12H, check every 2H, room temperature 24H after the test, electrical performance and structure is normal.

• Live work plug test: USB interface plug test, insert THE USB Type-C line into the USB Type-C base of the product (live), plug and plug 10 times /1 minute, the function is normal after 2000 times, the spring has good elasticity, no breakage, no poor contact, normal performance.

• Low temperature working test: temperature -10℃, input DC9V, humidity 20%-30%, connected load working for 12 hours, check every 2H, room temperature 2H after the
  test, electrical performance and structure is normal.

• Aging test: 9V aging 2H, full load aging, room temperature 25°±3°, aging load with indicator light.
  Bad phenomenon: the shell can not have scratches, cracks, no output, voltage instability, shell melting and other bad phenomena.

Automatic Protection Function

When the transmitter detects that the load current connected to it is too large (the current exceeds the rated output value), the transmitter automatically shuts off the connection with the receiver for automatic safety protection. If dual 15W charging at the same time, the adapter function is insufficient and will automatically adjust the applicable output power. If the device is removed for 5 seconds and placed correctly during charging protection, it can enter charging state again only after successful connection

Product Outline

Assembly diagram

Aim at the base gap and press down the spaceman, and hear a click sound

Disassembly diagram

• Step 1: Hold one leg of the spaceman and push it up against the base with your thumb

• Step 2: Will hear a click after step 1, and one leg come out 2CM, and then pull out the second leg.

• Step 3: Once the sides are balanced, a little force can lift the spaceman off the base

FCC Warning

Labeling requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Information to user
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement

1. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
2. This equipment should be installed and operated with minimum distance 15cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>