geemarc AMPLICALL Sentinel 1 Video Baby Monitor with Shaker Flash and Loud Alarms User Manual

: June 3, 2024
: geemarc

AMPLICALL Sentinel 1 Video Baby Monitor with Shaker Flash and Loud Alarms

Video baby monitor with Shaker, Flash and Loud Alarms

Please refer to our website: www.geemarc.com for an up to date user guide, as
there may be important updates and changes you need to be aware of.

Note: This User’s Guide provides you with all the information you need to get the
most from your product.

Before you can use the baby monitor, we recommend you insert and
fully charge the battery in the Baby monitor, so that it continues to
work if you disconnect it from the mains power to carry it to another
location. Please read the Safety Instructions on page 2 before you
install the units.

Package Contents

The AC Sen1 (AMPLICALLTM Sentinel 1) box contains the following items:

1 Baby monitor
1 Baby unit (camera)
2 AC/DC power adaptors
1 Foldable stand
2 magic tapes
1 shaker
1 user manual

1. Safety Instructions

WARNING: This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use.
Therefore, always read the instructions in this User’s Guide carefully before using
the device.

Adult assembly is required. Keep small parts away from children when assembling.
This product is not a toy. Do not allow children to play with it.
This baby monitor is not a substitute for responsible adult supervision.
Do not place the camera or cables in the cot or within arm’s reach of the baby
(at least 1 meter away).
Keep the cords out of reach of children.
Do not use the baby monitor near water or a heat source.
Only use the power adapters provided.
Do not touch the plug contacts with sharp or metal objects.

2. Overview of your Baby monitor

A1. Flash / Indicators
A2. Power Button
A3. Menu / Back Button
A4. Volume +/-
A5. Navigation key
A6. OK Button
A7. Speaker
A8. Talk / Zoom Button
A9. Mic

Baby Monitor – Basic operation of the keys

|

Power button

|

Turn ON/OFF – Press and Hold 3 seconds Screen Sleep/Wake – Press One time

|

Menu button

|

Press to access different menu options

Back button

|

Press to back to previous directory

|

Navigation

key

|

Press to move up, down, left, right to select optional item on the screen

OK button

|

Press to confirm or accept the selection

|

Talk button

|

Press and hold to talk

Zoom button

|

Press to digital zoom

|

+/- button

|

Press to adjust volume level

B1. Power Button
B2. Light Sensor
B3. Lens
B4. Indicator
B5. Temperature Probe
B6. Speaker
B7. DC input
B8. Pair button

Camera – Basic operation of the keys

Power button :

Slide to turn ON/OFF

|

PAIR button :

Press to pair the Baby monitor

Note:

The enclosed camera has already been paired, You do not need to register it again unless the camera loses its link with the Baby monitor. See section “5.1 Camera” for more details.

3. Setting up your Video Baby Monitor

3.1 Camera power supply

– Connecting the power adapter for the camera.

Connect the small plug of the adapter to the Camera and the other end to the power socket.
Only use the enclosed adapter (5V DC/1 A).

WARNING:
Do not place the camera or cables in the cot or within arm’s reach
of the baby (at least 1 meter away).

3.2 Baby monitor power supply

– Connecting the power adapter for the Baby monitor if is in low battery status.

Connect the small plug of the adapter to the Baby monitor and the other end to
the power socket.
Only use the enclosed adapter (5V DC / 1,5A).
Press and hold the POWER button on the Baby monitor to turn it ON.

4. Monitoring Screen Icons

C1. Signal strength indicator
C2. Camera number
C3. Vocal / Mute mode
C4. Lullabies
C5. Motion Detecting
C6. Feeding Timer
C7. VOX mode
C8. Temperature Alarm
C9. Baby room’s temperature
C10. Time
C11. Battery indicator

5.1 Camera

– User can add 4 camera at most.
– Select “Camera“ → SeIect “Add Camera” → Press “OK” → Press the Pairing
Button on Camera.

5.2 View

User can change view of different camera (if add different camera).

5.3 Lullabies

User can choose lullaby to play from lullabies list. It will automatically single cycle
once you chose one of lullaby; If chose All, it will automatically repeat all lullabies
list. Press OK button to valid your selection.

5.4 Feeding Timer

User can choose the time to remind for feeding kids, after selected, count down
bar will appear in video view interface, when up to predefined time, monitor will
alarm for 5 seconds. Press OK button to valid your selection.

5.5 Setting

5.5.1 Language Setting

Include 5 languages (English, Español, Français, Deutsch, Dutch). Press OK
button to valid your selection.

5.5.2 Brightness Setting

Select brightness level (1~5 levels), user right or left arrow to set your level. Press
OK button to valid your selection.

5.5.3 Date & Time

Set date (Year / Month / Day) and Time (Hour / Mimute / Second).
Press Up or Down arrow to set the date and use Right or Left arrow to move in the
setting. Press OK button to valid your setting.

5.5.4 Temperature Alarm

Baby camera detects baby room’s temperature. User can set the temperature limit.
Alarm for 5 seconds when over / below limits. Press Up or Down arrow to set the
temperature and use Right or Left arrow to move in the setting. Select ON and press
OK button to activate the function.

5.5.5 Temp. °C / °F

Select temperature display with Celsius / Fahrenheit (°C / °F). Press OK button to
valid your setting.

5.5.6 Frequency

User can switch wireless frequency between 60Hz / 50Hz. 60Hz more smoother
than 50Hz, but use more battery. Press OK button to valid your setting.

5.5.7 Motion Detecting

By this function selected to ON, user can hear alarm once any movement happened.
Press OK button to valid your setting.

5.5.8 VOX

Select sensitivity level (High, Middle, Low) with Up or Down arrow keys. User can
hear alarm once any abnormal sound or noise happened. Press OK button on ON
position to active or on OFF to inactivate the function.

5.5.9 Power Saving (ECO mode)

Select ON/OFF with the Right or Left arrow keys.
Set to ON (the battery icon turn to Orange ), baby monitor Display sleep
automatically within 10 seconds in idle status and press OK button to valid.
Press any key to wake up Display.

5.5.10 Default Setting

Select ON/OFF to restore factory default setting with the Right or Left arrow keys.
Press OK button to valid your setting.

6. Technical Features

Features

|

Parameters

|

Features

|

Parameters

---|---|---|---

Two way speaker

|

Monitor: Speaker: 1W Mic: -42±3dB

Camera: Speaker: 1W Mic: -34±3dB

|

Brightness

|

5 levels

Light bar

|

5 levels

Volume

|

5 levels

Temperature

detection

|

0℃-40℃

|

Multi-language

|

5 languages (English, Spanish, French, German, Dutch)

H/L temperature alarm

|

Low Temperature: 15℃ High Temperature: 30℃

|

Upside down view

|

Rotate 180°

Frequency adjust

|

50Hz / 60Hz

|

Power saving (ECO) mode

|

Parent display sleep

automatically with 10 seconds in idle status.

VOX

|

High / Middle / Low

Motion Detection

|

ON / OFF

|

Vibration

|

Voltage: 5V

Feeding Timer

|

2h, 3h, 4h, 5h setting

|

Zoom

|

x 2

Lullabies

|

4 lullabies

|

RF power

|

< 250mW

7. GUARANTEE

From the moment your Geemarc AMPLICALLTM Sentinel 1 (AC Sen1) is purchased, Geemarc guarantee is for the period of two years. During this time, all repairs or replacements (at our discretion) are free of charge. Should you experience a problem then contact our help line or visit our website at www.geemarc.com. The guarantee does not cover accidents, negligence or breakages to any parts. The product must not be tampered with or taken apart by anyone who is not an authorized Geemarc representative. The Geemarc guarantee in no way limits your legal rights.

IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM.

Please note: The guarantee applies to the United Kingdom only.

8. DECLARATIONS: UKCA Directives

Geemarc Telecom SA hereby declares that this AMPLICALLTM Sentinel 1 (AC Sen1) is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/UE.

The UKCA declaration of conformity may be consulted at www.geemarc.com

This equipment has been tested and founded to comply with limits for a class B digital device, pursuant to part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference

AND

(2) this device must accept any interference received, including interference that may cause undesired operation.

Recycling Directives

The WEEE (Waste Electrical and Electronic Equipment) has been put in place for the products at the end of their useful life are recycled in the best way. When this product is finished with, please do not put it in your domestic waste bin. Please use one of the following disposal options:

– Remove the batteries and deposit them in an appropriate WEEE skip. Deposit the product in an appropriate WEEE skip.

– Or, hand the old product to the retailer. If you purchase a new one, they should accept it. Thus if you respect these instructions you ensure human health and environmental protection.

For product support and help visit our website at www.geemarc.com Email : help@geemarc.com

telephone 01707 387602

lines are open 09h00 to 16h00 Mon to Fri

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate adio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body