OPT7 Aura RV Underbody with Door Assist Lighting Kit Installation Guide
- June 8, 2024
- OPT7
Table of Contents
OPT7 Aura RV Underbody with Door Assist Lighting Kit
MAIN COMPONENTS
INSTALLATION
STEP 1
Decide where to locate the control box and ensure wiring has enough length for
light bars to be installed in desired location.
IMPORTANT:
The control box must be installed inside the vehicle as it is not waterproof.
Avoid installation areas of the engine bay + heated surfaces.
As shown below, connect all the LED bars to the control box with the included
extension cables.
HOW TO CONNECT POWER HARNESS TO YOUR VEHICLE
- Connect the Red line(+) of power hareness to the vehicle battery’s positive terminal.
- Connect the Black line (-) of power hareness to the vehicle battery’s negativeterminal or an unpainted area on your vehicle’s frame
WARNING
- Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10AMPs or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted WARNING in areas where will not exceed 85℃ or 185℉.
STEP 2
Secure Control box in desired location with Velcro or zipties.
CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely
hidden from exposing elements of moisture.
STEP 3
Mount brackets to secure the light bars first. Secure the light bars using the
zip ties to tie all the wiring away from the moving components
IMPORTANT:
The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE
(not included) or ELECTRICAL TAPE around the LED connectors to ensure the
longevity of the lighting kit.
STEP 4
Using the included E-Z Remote, select your desired color or pattern.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
OPTIONAL UPGRADE
Upgrade your Aura Original Control Box to the Aura Pro Bluetooth Control Box.
All new AURA Pro Bluetooth is App enabled by a smartphone controller (iOS &
Android Compatible).
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time.
OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7
Lighting will void product warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>