Bebe Stars MJ-07A Car Seat Prime 360° Isofix Grey User Manual

USER’S MANUAL NEW Item 915 (MJ-07A)
Group 0+/1/2 (0-25kgs)
STANDARDS ECE R44/04

Your child’s safety depends on you. Proper product’s use cannot be assured unless you follow these instruction.
DO NOT USE THIS PRODUCT BEFORE YOU READ AND UNDERSTAND THESE INSTRUCTIONS
Thank you for purchasing this safety car seat by Bebe Stars. We will always give you the best products and service .
Please read the user manual before you use!

SAFETY NOTES

WARNING
Read this instrucarefully.
The correct fiof the ISOFIX anchoring systems or 3-point vehicle belt is of vital importance for the safety of your child.
We advise you strongly not to use an unlicensed or modified or without manufacturer’s instrucproduct, it is very dangerous.
This is a “Universal” “Specific Vehicle” child restraint. It can be installed by Vehicle Seat belt separately or by Vehicle Seat belt+ISOFIX. It is for general use in vehicles and it will fit most, but not all car seats.
The straps holding the restraint to the vehicle should be t, any straps restraining the child should be adjusted to the child’s body and should not be twisted.
Make sure the lap belt is stretched as low as possible over the child’s hips.
DO NOT use any load bearing force points other than those described in the instrucand marked in the child restraint.
For the future use of the seat, it is important that you keep the instruc manual carefully. If in doubt,please contact the manufacturer.
We do not recommend installing the child safety seat in the front passenger seat.
DO NOT use a child safety seat if the vehicle seat is equipped with front airbags, it can be dangerous. This does not apply to so-called side airbags.
It is recommended that the car seat should not be used more than 10 years from the date of producThe properof the products may deteriorate due to, for example, ageing of the plaswich may not be visible.
DO NOT use a child safety seat that has been in a crash. A crash can cause damage to the child safety seat that you can not see.
DO NOT modify or aempt to modify the child safety seat in any way.
DO NOT take apart or aempt to take apart this child safety seat etc.
DO NOT use a child safety seat with damaged or missing parts.
DO NOT change the cover or harness, they are the important components.
The moving parts of the car seat should not be lubricated in any way.
No alterashould be made to the product as this could affect part or the overall safety of the seat.
DO NOT remove the product’s label. There are important nos on labels.
Tell your child that he/she should never play or adjust with the seat.
We advise you strongly not to use a second-hand product, because you are not sure what has happened to it.
DO NOT place the seat on the edge of countertop or a sosurface like maess, the seat may fall and hurt the child.
Make sure all foldable passenger seats are fit in place.
Make sure there are no dangerous or corrosive substances in the car, which may damage the seat.
Make sure that all luggage and objects likely to cause injury in the event of an accident are properly secured.
The rigid items and plasparts of a child restraint must be located and installed so that they are liable, during everyday use of the vehicle, to become trapped by a movable seat or a door of the vehicle.
Make sure the seat is in a safe posiDo not put any sharp or hard items around the seat.
Make sure that there are no other items in the clothes or pockets between the child and the seat belt, as this may cause injury in an accident.
Make sure the vehicle belt is tly secured and the car seat is correctly installed each you use it.
Make sure that the vehicle belt is correctly fastened and does not get stuck in the car door or other sharp objects, as it may be damaged. Please replace the vehicle belt if it is damaged.
Keep the child in the car seat at all while the car is moving.
NOTICE: The seat must be secured in the car, even when it is not on use. An unsecured seat may injure other passengers in the car in an sudden stop.
Always check whether the seat parts are complete and the seat belt is fastened correctly before each use.
DO NOT use with 2-point belt. Please install with the 3-point belt.
IMPORTANT
This car seat is suitable for children from birth to 25kg.

installa
Group 2 15-25kg| ISOFIX + 3-point car seat belts| Forward facing installa

• The seat is in accordance with ECE R44/04 regula
• Please install the car seat according to the manual and sers on the car seat.

The child seat is only suitable for use if the approved vehicles are fied with 3-point safety belts, approved to ECE R16 standards. When using the child seat on a rear seat, move the passenger seat as far forward as possible.

KNOW YOUR CHILD CAR SEAT

1. Removable headrest
2. Comfort pad
3. Seat buckle
4. Harness adjustment strap
5. Support leg
6. Headrest adjuster
7. Adjustable headrest
8. Shoulder pad
9. Recline adjuster
10.  Support leg adjuster
11. Manual storage
12. Isofix connector
13. Side protec
14. Isofix adjustment handle

INSTALLATION GUIDE

Group 0+1(0-18kg)
REARWARD FACING

1. Retract the support leg and place the child’s seat on the vehicle seat. Use the recline adjuster to rotate the seat to backwards posichoose from 3 recline position.
2. Connect the isofix guiders to the car’s seat isofix connector. Expand the isofix connectors of the child’s car seat and guide them through the isofix guiders.
3. Push the child’s car seat towards the vehicle’s seat, the isofix connectors will anchor to the seat and retract back. Make sure the indicaon the isofix handles are turned green. If they are sred, please repeat the operation.
4. Press the support leg adjuster and expand the leg unit is touching the floor of the vehicle. The indicaon the leg adjuster will turn green. If it is sred, please repeat the operation.
5. Use the belt adjustment strap to loosen the harness, unlock the buckle and place the child on the car seat.

Group 1(9-18kg)
FORWARD FACING

1. Retract the support leg and place the child’s seat on the vehicle seat. Use the recline adjuster to rotate the seat to forward posiplace the recline posi according to your needs.
2. Connect the isofix guiders to the car’s seat isofix connector. Expand the isofix connectors of the child’s car seat and guide them through the isofix guiders.
3. Push the child’s car seat towards the vehicle’s seat, the isofix connectors will anchor to the seat and retract back. Make sure the indicaon the isofix handles are turned green. If they are sred, please repeat the operation.Isofix + support leg + harness
4. Press the support leg adjuster and expand the leg unit is touching the floor of the vehicle. The indicaon the leg adjuster will turn green. If it is sred, please repeat the operation.
5. Use the belt adjustment strap to loosen the harness, unlock the buckle and place the child on the car seat.
6. Lithe headrest unthe boom part of it is on the same level as the child’s shoulders. Join the two side parts of the harness and clip them in the main buckle.
   Use the strap adjuster to ten the harness onto the child’s body. There must be a distance equal to your palm’s thickness between the harness and the child’s body.

Group 2(15-25kg)
FORWARD FACING
Isofix + 3-point car seat belts

1. Unbuckle the harness and use the adjuster to slack it. Remove the comfort pad and lithe headrest cushion. Pull open the back pad and store the harness inside. Close the back pad and the headrest cushion and store the buckle into the slot on the seat.
2. Place the child’s seat on the vehicle seat. Use the recline adjuster to rotate the seat to forward posiplace the recline posi according to your needs.
3. Connect the isofix guiders to the car’s seat isofix connector. Expand the isofix connectors of the child’s car seat and guide them through the isofix guiders.
4. Push the child’s car seat towards the vehicle’s seat, the isofix connectors will anchor to the seat and retract back. Make sure the indicaon the isofix handles are turned green. If they are sred, please repeat the operation.
5. Place the child in the car seat and lithe headrest unthe boom part of it is on the same level as the child’s shoulders. Slide the car’s seat belt under th car seat’s handrails.
6. Guide the shoulder part of the seat belt through the red guides located on the headrest. Buckle the seat belt and make sure it is t.

Group 2(15-25kg)
FORWARD FACING
3-point car seat belts

1. Place the child in the car seat and lithe headrest unthe boom part of it is on the same level as the child’s shoulders. Slide the car’s seat belt under th car seat’s handrails.
2. Guide the shoulder part of the seat belt through the red guides located on the headrest. Buckle the seat belt and make sure it is t.

GENERAL GUIDES

Make sure there is a distance equal to your palm’s thickness between the harness and the child’s body. The Side Impact Protec(SIP) can be opened and closed by pressing on it.
*SIP may not be suitable for all vehicles when opened.

MAINTENANCE

1. Discard the harness and remove the waist pad.
2. Remove the auxiliary headrest.
3. Unbuon the central cover underneath the headrest to remove it.
4. Remove the main cover by stretching the fabric inwards the seat.

Reverse the process to put all fabrics back.
Hand wash only (40° warm). Use mild detergent. Do not iron, dry clean, bleach or tumble dry. Dry flat away from direct heat.
DO NOT USE BLEACH, ABRASIVE OR UPHOLSTERY CLEANING AGENTS.

Thank you for choosing Bebe Stars products
FOLLOW US
www.bebestars.gr
https://www.bebestars.gr/?s=915-
  bebestarsbygilis
@bebe.stars
bebestarsbygilis
63200 | Nea Moudania | Greece

Documents / Resources

| Bebe Stars MJ-07A Car Seat Prime 360° Isofix Grey [pdf] User Manual
MJ-07A Car Seat Prime 360 Isofix Grey, MJ-07A, Car Seat Prime 360 Isofix Grey, Prime 360 Isofix Grey, Isofix Grey
---|---

References

• Παιδικά Προϊόντα & Βρεφικά Είδη στη Χαλκιδική - Bebe Stars

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>