Chargers G618S 3 In 1 Charging Station Instruction Manual
- June 3, 2024
- Chargers
Table of Contents
Chargers G618S 3 In 1 Charging Station
Introduction
- Charging for Android Phones.
- Charging for Bluetooth headset with TYPE-C.
- Wireless charging area of SAMSUNG Galaxy Watch3/4/5.
- Operating indicator light.
- TYPE-C Female.
Operation instructions
-
Android Phone charging: Plug the mobile phone upright to the position of the Phone head to charge, and see that the “charging sign” lights up on the screen of the mobile phone, indicating that it is charging normally
Note: The toggle arc of the Phone head is limited, and the force is moderate when toggled to prevent damage to the mobile phone or mobile phone charging head)
-
Bluetooth headset charging: Plug the Bluetooth headset into the Phone head of the headset to charge
Note: the charging Phone head of the headset is fixed and cannot be pulled hard to prevent damage to the headset or the charging Phone head )
-
This product needs to be powered by an adapter with a power18W, and is connected to the Type-C port for power supply. When the power indicator blue light is on, it means the power supply is normal.
-
Power indicator: The blue indicator is always on when the product is powered on.
Specifications
| 3 in 1 charging station| Model| G618S
---|---|---|---
Product Size| 10776 131.2（mm）| Power supply
Port
| Type-C
Input| 9V/2A| Maximum output
power
| 18W
Matters needing attention
- When charging, it is best to use the original 9V/2A adapter to prevent the charging speed from being affected.
- Do not put metal foreign objects in the charging area of the Galaxy watch to prevent the device from not charging.
- When charging, please insert the device and the Phone plug in correct place to prevent the device from not charging.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm the radiator and your body: Use only the supplied antenna.