Chargers M15 2in1 Magnetic Wireless Charring Pad User Manual

Chargers M15 2in1 Magnetic Wireless Charring Pad

Preface:

Dear customers, thank you for purchasing our products. In order to understand the product further. Please read this manual carefully before use. We wish you a pleasant experience!

1. Product input interface
2. Mobile phone/headphone charging position
3. Mobile phone/headphone charging position
4. Indicator light

Specifications

• Input: 12V 2A
• Output 1: Phone 15W Max/TWS 3W Max；
• Output 2: Phone 15W Max/TWS 3W Max
• Input interface: USB-C

Compatible Devices

• iPhone13Pro Max/13por/13/13mini/12Por Max/12por/12/12mini/
• Airpods/Third Generation/Pro/3/2

Using instructions

• Power connected ,the device enters the standby state;
• Put the mobile phone that supports wireless charging on the corresponding charging area for wireless charging.
• Put the TWS headset that supports wireless charging on the corresponding charging area for wireless charging.

Indicator light description

• Blue light comes on when power is turned on (goes off in 2 seconds)
• Blue light comes on when either party is charging your phone or headset (goes off after 20 seconds)
• This light does not show when your device is fully charged.
• When two devices are charging at the same time, the blue light indicates An indication that both sides are charging.
• When the wireless charger output is charging abnormally or a foreign object is detected, the blue light flashes continuously.
• The blue light flashes continuously when a foreign object is detected.

How to solve abnormal charging:

• Please confirm whether your mobile phone has wireless charging function before use;
  ”Check whether the phone deviates from the wireless inductive charging area of the charger;

• ‘Whether a non-metallic protective case is used for charging mobile phones, and the thickness of the protective case is recommended not to exceed 4mm;

• When metal objects touch the charging area, the charger will automatically identify and provide power off protection.

• When the temperature of the charger is too high, it will automatically start the protection.Please unplug the power supply first and use it after the charger recovers the temperature.

Q&A:

• Q:Why is there heating in the charging of wireless charging inductive products?
  A:During the charging process, there will be a certain loss of magnetoelectric conversion, which will be converted into heat, causing the mobile phone and charger to generate heat, which is a normal phenomenon.
  Suggestions:

  • When the device is fully charged, disconnect it from charging in time to avoid a long cycle of charging, which may lead to continuous heating of the device and charger;
  • It is recommended to stop running the background software when charging the phone.

Safety Notes

• Use indoor or under dry environment, avoid placing or using in the environment of high temperature, humidity, strong static electricity and strong magnetic field;
  For your safety, please do not use wet hand plug and unplug electrical appliances;

• Avoid putting it in a place easily accessible to infants and children; ，Do not use the product if it is contaminated with water or dirt;

• Non-professional personnel are not allowed to open and repair without authorization.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.
   Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

CE Declaration of Conformity and UKCA Declaration of Conformity

• EU Compliance statement: Shenzhen Yifeng Intelligent Technology Co., Ltd. Hereby declares this device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the EU Declaration of conformity is available online at http://www.YFZN.con/euro-compliance
• UK compliance statement： Shenzhen Yifeng Intelligent Technology Co., Ltd. Hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206).A copy of the
• UK declaration of the conformity is available online at http://www.YFZN.con/UKCA-compliance
• RF Specification
• WPT: 110KHz-148KHz
• Radiated H-Filed: -6.47dBuA/m (@10m)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>