Smart-Life24 SL05814D WLAN Bluetooth Light Chain User Manual

User Manual
Fairy Lights

Specifications

Dimmable. 16Million Co!cc–• Music Sync ‘Nom with Alexa C-logo. Homo APP Como. Remote control. Local con:rol.

Please note that all colorful string lights cannot be DIY cut!

Utilization of Controller box

Music: Short o-ess 😮 enter the -7-IL: sic -node. you can sveh.ch between 4 music modes.

Colour. Short o•ess to switch 20 kinds of colorful scene modes.
On/off: Short press to turn on/off the LED string light. Long press c:s-Abution network.

Long press ‘a 3 seconds to switch between must mode and scene mode

1.      Sher. press in m..:sic mode 😮 switch 4 <inds of music dynamic effect:s or– sequence.

2.      Slott press in scene mode to switch 20 Econo dynamic effects in sequence.

On/Off : Shur: press to turn or/ off the LED stare light Long press distribution network.

IR Remote Controller 24 KEY

1. _ED eightne.ss amusement button[-]. Increase sensitivity in music mode.

2. _ED eightness adjustment button[-], Reduce sensitivity in music mode.
3. ON/OFF button.

4. LED white button [switch between cold and warm white colors].
5. LED color buttons(Red Green Blue 3 colors).
6. Timing function on/off lights:1 hour,4 hours, 8 hours.
7. 3 music modes.
8. 5 fixed colorful scene modes.
9. Brightness button: 25%, 50%, 100% from top to bottom.
10.   One key to start 20 kinds of fixed colorful scene modes cycles, switch one every 30 seconds.
11.   In the static monochrome mode, the 16 colors change forward or backward in sequence; in the dynamic mode, the 20 modes change forward or backward in sequence for you to find the color or scene you like.

Please pull out the plastic tab from the bottom of the IR remote to ensure that the battery is powered properly.

Make sure the IR rernole aims at the IR receiver within the sensing distance. The angle of the IR receiver is 120 and the sensing distance is 5 meters. Please remotely control within the sensing range.

Quickly press the switch button twice to control the infrared switch [if the light string infrared conflicts with the TV remote control, you can choose to use it or not)
Setting Smart Life App
1. Download the “Smart Life”APP from APP Store or Google Play Market, or scan the OR code and install the “Smart Life” for either 10S or Android.

http://e.tuya.com/smartlife

Connect with mobile phone [Auto Scan]

1. Turn on the smartphone or device Bluetooth function and ensure the smartphone or device network is ON.
2. Before connecting, please make sure your smartphone or device is connected with your home Wi-Fi 2.40Hz successfully.
3. Hold the controller the button for 5 seconds, ensure red lights are now rapidly flashing [2 times per second].
4. Open the application, click “+” to select “Auto Scan Mode”, and then start to automatically scan products that can be connected.
5. Once connected, the App will prompt the connection, then click Done”.
6. Now you can control the Smart LED Lighting through Smart Life App.

Into the home page
Select Auto Scan Mode

Enter the Wifi password
The equipment connected to the Internet

C5 Distribsion network
(6) Jump to the user panel success

Connect with mobile phone (Add Manually]

1. Turn on the smartphone or device Bluetooth function and ensure the smartphone or device network is ON.
2. Before connecting, please make sure your smartphone or device is connected with your home Wi-ri 2.4CHz successfully.
3. Hold the Light strip controller button for Ssecoids, ensure red lights is fast blinking.
4. Open App and click “+” to add manually the corresponding product.
5. Confirm String Light is now rapidly flashing (2 times per second].
6. Once connected, the App will prompt the connection, then click “Done”.

Into the home page
Select the correspond ng product model pairing

Q3 Start pairing 4 En: er the Wifi password

The device connected to the Internet

Support 3rd Party Control

Distribution network Q Type the edit menu 2 Select the third-party success of the user panel application to be operated.

Warm Tips

• Please check whether the device is connected with power and your phone is connected: ed with Wi-Fi.
• Check routers: rz the -outer is a dual-band router, please select a 2.4GHz network to add a device. You also need to open the router broadcasting function.
• Set up the wireless router: Set encryption method as WPA2-PSK authorization type as AES, or set both as auto. The Wireless mode cannot be only 5GHz. Please name router Wi-Fi in English. n order to stay strong Wi-Fi signal, please keep the device and router within a certain distance.
• Check whether connected devices have reached the maximum number of router connections. If so, please try to turn off the Wi-Fi connection of some devices.
• Make sure the router wireless MAC filtering function is enabled.
• Remove the device from the filter list and make sure that: the router is not: prohibiting device:rom connection.
• Make sure the entered password is correct when adding a new device.
• App for more operations, please refer to the corresponding application tutorial.

FCC Statement

• This device complies with part 15 of the FCC Ru es. Operation is a sub, etc to the following two conditions:
  [1) This device may not cause harmful interference, and
  (2) This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

• The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Warranty description

• This product has a one-year warranty from the day after signing. Please contact us if you have any questions or issues.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>