MEEC TOOLS 015274 Garden Pump Instruction Manual

800 W
53,3 l/min
GARDEN PUMP
Item no. 015274

GARDEN PUMP
Instruction Manual

015274 Garden Pump

OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).

Care for the environment!
Recycle discarded products in accordance with local regulations.

Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

EU DECLARATION OF CONFORMITY

Item number
015274
****Jula AB, Box 363, SE-532 24 SKARA, SWEDEN

This declaration of conformity is issued under the sole responsibility of the manufacturer
GARDEN PUMP
Conforms to the following directives, regulations, and standards:

62233:201,
EMC 2014/30/EU| EN 55014-1:2017+A11, EN 55014-2:2015,EN IEC 61000-3-2:2019, EN 61000-3- :2013+A1
RoHS 2011/65/EU + 2015/863| EN 50581:2012

Mattias Lif
BUSINESS AREA MANAGER (Signatory for Jula and authorized to compile the technical documentation.

SAFETY INSTRUCTIONS

• This product can be used by children from 8 years and upwards and by persons with physical, sensorial or mental disabilities, or persons who lack experience or knowledge if they are supervised or receive instructions concerning the safe use of the product and understand the risks involved with its use. Do not allow children to play with the product. Do not allow children to clean or maintain the product without supervision.

• Keep children under supervision to make sure they do not play with the product. Do not allow children to clean or maintain the product without supervision.

• Familiarise yourself with the controls on the product and how to use them. Read all the instructions and safety instructions before use. Failure to follow all the instructions and safety instructions can result in a risk of electric shock, serious personal injury, and/or material damage.

• Contact the retailer or qualified personnel if you have any problems or questions.
  • Store these instructions so that they are readily available for everyone who uses the product. These instructions should be enclosed with the product if it is sold or passed on.

• Do not make any modifications to the product. Only use accessories recommended by the manufacturer.

• The product must only be used for its intended purpose and in accordance with these instructions. The product must only be used for its intended purpose and in accordance with these instructions, otherwise, there is a risk of personal injury and/or material damage. The manufacturer cannot accept liability for personal injury and/or material damage
  resulting from improper use.

• A damaged power cord or plug must be replaced by an authorized service center, or other qualified personnel, to ensure safe use.

• Do not use the product if it is damaged. Always check the power cord, plug, and casing before use. If the product is damaged, or not working properly, it must be repaired or discarded.

• Pull out the plug immediately if the power cord or product gets damaged or stops working properly, otherwise, there is a risk of electric shock.

• Repairs must be carried out by qualified personnel. Imperfect repairs can result in a risk of electric shock, serious personal injury, and/or material damage.

• Do not pull the power cord to pull out the plug.

• Do not allow the power cord to hang over the edge of a table or worktop, or to come in contact with hot surfaces. Avoid kinking or bending the power cord.

• If an extension cord is used the cross-sectional area of the wires must be dimensioned for the power supply to the product.

• If the product is used outdoors, only use an extension cord approved for outdoor use.

• The product is not intended to transport water for human consumption.

• Do not use the product to transport corrosive, flammable, or explosive substances such as petrol or other petroleum products, nitrogenous liquids, grease, oil, salt water or wastewater from toilets, or liquid that has a higher viscosity than water.

• The temperature of the pumped water must not exceed 35°C.

• Keep this product out of the reach of children.

• Do not use the product if there are any persons in the water.

• Make sure the product does not suck up aquatic animals, such as fish.

• Pay attention to the risk of contaminating the liquid as a result of leaking lubricant.

• Protect electrical connections from moisture.

• Do not expose the product to temperatures below 0°C. Make sure that the product is not run without water.

• Do not pump aggressive liquids or abrasive material.

• Do not pull the power cord or float switch cord to move the product, and do not use them to secure the product from moving.

• The product is only intended for household use and is not suitable for commercial purposes.

• The manufacturer cannot accept liability for personal injury or material damage resulting from improper use.

IMPORTANT:
The product must be connected to the mains with a residual current device of a max of 30 mA.

SYMBOLS

| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded products in accordance with local regulations.

TECHNICAL DATA

DESCRIPTION

Easy-to-use garden pump suitable for distribution of fresh water and watering because it is designed for continuous operation. In addition to the pump, there is a 4 m suction hose with a bottom/water filter, plus an adapter/quick coupling for a garden hose.

USE

PREREQUISITES

• The product must be connected to a correctly installed earthed power point with a residual current device that has a maximum tripping current of 30 mA.
• Check that the mains voltage corresponds to the rated voltage on the type plate.
• The product must be connected to a mains with a residual current device of a max of 30 mA for use in a pool or garden.
• If the product is used outdoors, only use an extension cord approved for outdoor use. The product must not be put in water.
• If an extension cord is used the cross-sectional area of the wires must be dimensioned for the power supply to the product. If an extension cord is used on a reel, pull out the full length of the cord.

COMMISSIONING

• For permanent installation, secure the product to the surface with four screws. Use suitable screws to hold the product in place.
• If the product is used for a pond or pool it should be installed in such a way as to prevent overflowing, and so that it cannot drop.
• The product should be protected from the weather. If the product is installed indoors the floor should be water-resistant or provided with a floor drain.
• Always check before use that the suction tube is airtight. Foam can accumulate in the suction hose if there is leakage, which will prevent the product from working properly.

WARNING!
The suction tube should be installed so that it is not subjected to mechanical stress. Fit a suitable filter if the pumped water is contaminated or turbid.

NOTE:
It is recommended to install a non-return valve to prevent return flow, which can cause the water in the product and the suction tube to empty when the product is not running.

• All the connections to the pump must be sealed to reduce the risk of air penetrating into the system.
• Threads on metal pipes must be sealed with jointing tape.
• All parts of the suction tube should be installed by qualified personnel.
• The inner diameter of the suction tube should be at least 25 mm. The suction tube should be made of material that does not squeeze at pressure and which is resistant to bending.
• The pump’s suction tube should be as short as possible – long suction tubes reduce the capacity of the pump.
• The suction tube should run upwards all the way to the pump, to avoid air becoming stationary in the tube.
• Make sure that the inlet on the suction tube is always covered with water.
• All parts of the outlet tube should be pressure resistant.
• All parts of the outlet tube should be installed by qualified personnel.

HOW TO USE
The product can be installed in a piping system that supplies domestic water. In such cases the product should be connected to the piping system with a flexible hose, to avoid
transmitting vibrations to the piping system.

WARNING!

• Risk of personal injury. If components are used that cannot withstand the pressure, or if the installation is not carried out correctly, the outlet tube can burst and spray out water, which can cause personal injury and/or material damage.
• Electrical safety. Do not use the product in damp areas.

NOTE:
The product is not intended for transporting drinking water, only to transport water for a toilet or washing machine.

1. Remove the product from the packaging and place it on a level, stable surface.
   FIG. 1

2. Connect the suction hose to the water inlet and the outlet hose to the water outlet.
   FIG. 2

3. Open the refill opening cap and fill with water until it runs over. Replace the cap.
   FIG. 3
   NOTE:
   Even minor leakage can lead to malfunction.

4. Plug in the plug and start the pump.
   FIG. 4

5. Switch off the product and pull out the plug after use. Drain the water from the product by opening the drain on the pump.
   FIG. 5

FILLING THE PUMP HOUSING AND SUCTION TUBE WITH WATER

NOTE:
Risk of material damage. The product must be filled with water before it starts. Water does not need to be refilled during long-term use. Do not leave the product unattended
when running. Dry running can result in material damage.

1. Remove the pump casing.
2. Fill the product full of water.
3. Replace the filter and fit the pump casing and seal.
4. Fill the suction tube with water if the product is only going to be used temporarily.
5. Open a tap on the outlet tube to release any air sucked in.
6. Start the product.
7. Switch off the product when water comes out without any air.

WARNING!
Pull out the plug before cleaning and/or maintenance.

• Do not attempt to carry out any measures other than as described in these instructions for maintenance and troubleshooting. Any problems not described in these instructions should be carried out by qualified personnel.
• Only use accessories and spare parts recommended by the manufacturer. The use of other accessories and parts can result in a risk of personal injury and/or material damage. It will also invalidate the warranty.

IMPORTANT:
All the seals should be replaced if the product is dismantled.

TROUBLESHOOTING

The troubleshooting guide on the next page is used to identify the causes of common problems and how they can be rectified. Contact the retailer if the problem cannot be rectified with the help of the troubleshooting guide. The warranty does not cover damage resulting from repairs or attempted repairs carried out by unauthorized persons.

TROUBLESHOOTING CHART

PowerPoint, and fuse.
Overheating is usually because the temperature of the water is too hot.| Identify and rectify the reason.
Blockage.| Clean the filter.
The residual current device has tripped.| Reset the residual current device. Contact an authorized electrician if the residual current device continues to trip.
Motor malfunction.| Contact an authorized service center.
The product runs but delivers no water.| The suction tube is blocked.| Remove the blockage.
The product sucks air. are airtight.| Make sure that all the connections
The product is blocked by a foreign object.| Clean the filter.
Pump capacity is too low.| The delivery height is too high.| Do not exceed the maximum delivery height.
The diameter of the outlet tube is too small.| Use an outlet tube with a suitable diameter.
The outlet tube is blocked.| Remove the blockage.
The suction tube is blocked.| Clear the suction tube.
The outlet tube is bent.| Straighten out the outlet tube.
The outlet tube is leaking.| Make sure that the outlet tube and all the connections are tight.
The product makes a noise.| Air in the product.| Fill the product full of water. Make sure that all the connections are airtight.

2022-07-21
© Jula AB
JULA AB, BOX 363, SE-532 24 SKARA

References

• Jula – products for home and garden

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>