MEEC TOOLS 004841 Electric Pruning Saw Instruction Manual

MEEC TOOLS 004841 Electric Pruning Saw

Product Information

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.

The Electric Pruning Saw is a power tool used for trimming and cutting branches and other vegetation. The product is manufactured by Jula AB, a Swedish company that reserves the right to make changes to the product. The model number of the product is HKPCS06B01-X, and it has a power output of 750W and operates on 230V.

The product conforms to various European Union directives and regulations, including MD 2006/42/EC, EMC 2014/30/EU, OND 2000/14/EC + 2005/88/EC, RoHS 2011/65/EU + 2015/863. It also meets various harmonized standards such as EN 62841-1:2015, EN ISO 11680-1:2021, EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019+A1, EN 61000-3-3:2013+A1+A2, and EN 50581:2012. The guaranteed sound power level of the product is 100.3 dB(A).

Product Usage Instructions

Step 1 – Assembly

1. Attach the telescopic shaft and shoulder strap as per instructions in Bild 1 and Bild 3.
2. Attach the saw blade and chain as per instructions in Bild 4.

Step 2 – Safety Precautions

• Always wear protective gear, including safety glasses, helmet, gloves, and shoes.
• Keep a safe distance from the saw blade and chain when in operation.
• Do not use the product near flammable materials or liquids.
• Do not use the product in wet or damp conditions.

Step 3 – Operation

1. Ensure that the saw blade and chain are properly attached and tightened.
2. Connect the product to a power source of 230V ~ 50 Hz.
3. Press the trigger to start the saw blade and chain.
4. Adjust the cutting depth and angle as per requirements.
5. Release the trigger to stop the saw blade and chain.

Step 4 – Maintenance

• Clean the saw blade and chain after each use.
• Check the tension and sharpness of the saw blade and chain regularly.
• Replace worn-out or damaged parts immediately.

Note: For more detailed instructions and safety information, refer to the original operating instructions provided with the product or visit the Jula website for the latest version.

SAFETY INSTRUCTIONS

WORK AREA

• Keep the work area clean and well lit. Dark and cluttered work areas increase the risk of accidents and injuries.
• Do not use the appliance in explosive environments, such as in the vicinity of flammable liquids, gases or dust. The appliance produces sparks, which can ignite dust and fumes.
• Keep children and onlookers at a safe distance when using the appliance. You can lose control of the appliance if you are distracted.

ELECTRICAL SAFETY

• The plug on the appliance must match the power point. Never modify the plug in any way. Never use an adapter with earthed power tools. Unmodified plugs and matching outlets reduce the risk of electric shock.
• Avoid body contact with earthed surfaces such as pipes, radiators, cookers and refrigerators. There is an increased risk of electric shock if your body is earthed.
• Do not expose the appliance to rain or moisture. If water gets into the appliance this will increase the risk of electric shock.
• Be careful with the power cord. Never use the power cord to carry or pull the appliance, or to pull out the plug from the power point. Keep the power cord away from heat, oil, sharp edges and moving parts. Damaged or tangled power cords increase the risk of electric shock.
• If using the appliance outdoors, only use an extension cord approved for outdoor use. Cords intended for outdoor use reduce the risk of electric shock.
• If it is absolutely necessary to use the appliance in damp conditions, use a mains connection protected by a residual current device (RDC). Using an RCD reduces the risk of electric shock.

PERSONAL SAFETY

• Stay alert. Pay attention to what you are doing, and use your common sense when working with the appliance Never use the appliance if you are tired or under the influence of drugs, alcohol or medication.
• A moment of inattention when using the appliance can result in serious personal injury.
• Use personal safety equipment. Wear safety glasses. Depending on the type of machine and how it is used, safety equipment such as dust masks, non-slip safety shoes, safety helmets and ear protection reduce the risk of personal injury.
• Avoid accidental starting. Make sure the power switch is in the OFF position before plugging in the plug or inserting the battery, or lifting/carrying the appliance. Carrying the appliance with your finger on the switch or connecting appliances to the mains supply when the switch is in the ON position increases the risk of accidents and injuries.
• Remove adjuster keys/spanners before switching on the appliance. Allen keys, or the like, left in a rotating part of the machine can cause personal injury.
• Do not overreach. Always maintain a firm footing and good balance. This ensures better control over the power tool in unexpected situations.
• Wear suitable clothing. Do not wear loose-fitting clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose-fitting clothing, jewellery and long hair can get caught in moving parts.

USE AND CARE

• Do not force the appliance. Use the correct appliance for the planned work. The appliance does the job better and safer when used at the rate for which it was designed.
• Do not use the appliance if it cannot be switched on and off with the power switch. Machines that cannot be controlled with the power switch are dangerous and must be repaired.
• Pull out the plug and/or remove the battery before making any adjustments, changing accessories or putting the appliance away. These safety precautions reduce the risk of accidently starting the appliance.
• Store the appliance out of the reach of children when not in use. Never allow children, or anyone who is unfamiliar with the appliance and these instructions, to use it. The appliance is dangerous if used by inexperienced people.
• Maintain the appliance. Check that moving parts are properly adjusted and do not jam, and that no parts are incorrectly fitted or damaged. Check for other factors that could affect functionality. If the appliance is damaged it must be repaired before using it again. Many accidents are caused by poorly maintained appliances.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
• Use the appliance , accessories and bits etc., in accordance with these instructions, taking into account the actual working conditions and the work that is to be done. It can be dangerous to use appliances for purposes other than those they are intended to be used for.

SERVICE
The power tool must only be serviced by qualified personnel using identical spare parts. This will ensure that the power tool remains safe to use.

SPECIAL SAFETY INSTRUCTIONS

• Keep your hands and the rest of your body away from the chain when the appliance is in use. Check that the chain is not touching the ground or an object when starting the appliance. A moment of inattention when using the appliance can result in the chain coming into contact with your clothes are your body.

• Hold the back hand in your right hand and the front handle in your left hand, even if you are left-handed. Never hold the appliance in any other way – risk of personal injury.

• Hold the appliance by the insulated grips when working where it could come into contact with concealed cables or its own power cord. Contact with a live cable will cause the metal parts on the appliance to also become live – risk of electric shock.

• Wear safety glasses and ear protection.
  A safety helmet with visor, safety gloves and non-slip safety shoes with protection for the lower part of the leg are recommended. The proper protective equipment reduces the risk of personal injury in the event of contact with the chain or ejected material.

• Never use the appliance from a ladder, tree or other unstable place. This could cause you to lose your balance or lose control of the appliance.

• Branches under tension can spring away when they are cut and cause personal injury and/or cause you to lose control of the appliance.

• Be careful when sawing bushes. The thin stems can fasten in the chain and hit you or cause you to lose your balance.

• Switch off the appliance and pull out the plug before moving it. Carry the appliance with the front handle and with the chain pointing away from your body.

• Transport and store the appliance with the supplied guard fitted. Using the appliance properly reduces the risk of coming into contact with the chain.

• Follow the instructions for lubrication, tensioning the chain, and replacing accessories. The wrong tension and/or lubrication of the chain can result in a risk of the chain breaking and/or kickback.

• Keep the handles clean, dry and free from oil and grease. Greasy handles make it difficult to hold the appliance – risk of personal injury and/material damage.

• Only use the appliance to cut wood. Do not use the appliance for any other purpose than the one it is designed for. Do not attempt to saw plastic, bricks or building materials not made of wood. Incorrect use can result in the risk of personal injury and/or material damage.

• Only use accessories recommended by the manufacturer. The use of other accessories can cause the chain to break/or kickback.

• Follow the instructions to maintain the appliance and sharpen the chain.

• A worn or incorrectly sharpened chain increases the risk of kickback.

GENERAL SAFETY INSTRUCTIONS

• Check before use that the appliance, power cord and plug are intact and undamaged. A damaged cord or plug must be replaced by an authorised service centre or qualified person to ensure safe use.
• Never use the appliance if the cord or plug are damaged, or do not comply with the applicable regulations. Pull out the plug immediately if the power cord or plug get damaged during the work.
• Always maintain a firm footing and good balance.
• Keep the work area clean.
• Avoid contact with earthed parts – risk of electric shock.
• Always pull out the plug before working on the appliance.
• Check that the power switch is in the OFF position before plugging in the plug.
• The appliance must only be used by one person at once. Keep all other persons, especially children, away from the work area.
• Check that the chain is not touching the ground or an object when starting the appliance.
• Never allow children, or anyone who is unfamiliar with the appliance and these instructions, to use it. Persons over 16 may use the appliance under supervision as part of their training. These instructions should be enclosed with the appliance if it is sold or passed on.
• Store the appliance out of the reach of children.
• Never use the appliance if you are tired or under the influence of drugs, alcohol or medication.
• Do not expose the appliance to rain or moisture. Make sure the work area is well lit.
• Do not use power tools near flammable liquids or gases.
•  Store the appliance so that it cannot cause any risk of personal injury.
• Always apply the bumper spike before making a cut.
• Do not stop the chain before removing the bar from the wood. Sawing without applying the bumper spike can cause you to be jerked forwards.
• Never use the appliance from a ladder, tree or other unstable place. Do not saw with one hand.
• Always keep the power cord behind you.
• The power cord must lead away from the back of the appliance.
• Only use accessories recommended by the manufacturer.
• Use a residual current device when working outdoors.
• Do not overload the appliance. The appliance will work better and more safely at the load for which it is intended.
• Use the right tools. Do not use low-powered appliances for heavy work.
• Use the power cord only for its intended purpose. Never carry or pull the appliance by the power cord. Do not pull the power cord to pull out the plug. Keep the power cord away from heat, oil and sharp edges.
• If using the appliance outdoors, only use an extension cord approved for outdoor use.
• Use a strong support when cutting bundles of branches and thin branches. Do not stack the wood, do not let anyone hold it, and do not hold it with your foot.
• Always work upwards on slopes.
• Always apply the bumper spike to the wood before starting the appliance and starting to saw. Lift the back edge of the appliance and guide it with the grip on the front handle. Allow the appliance to swing around the bumper spike. In order to move the bumper spike, lift the bar off and gently press down the front handle. Pull back the appliance a little, apply the bumper spike lower down along the cut and lift the back handle.
• Do not stop the chain before removing the bar from the wood.
• If you are making several cuts, switch off the appliance between cuts.
• Plunge sawing and horizontal cuts should only done by qualified personnel.
• Apply the bar at the minimum possible angle for horizontal cuts. Be very careful, because the bumper spike cannot be applied.
• When sawing with the top side of the bar the saw will kick back towards the user if the chain gets stuck. Always saw when possible with the underside of the bar, because the tool is then drawn away from the body towards the wood.
• Be especially careful when sawing splintered wood. Sawn off pieces can be thrown up – risk of personal injury.
• Do not use the appliance to remove nails, etc.
• If possible support the appliance against the trunk when cutting off branches. Never cut with the tip of the bar.
• Cutting branches from live trees should be done by qualified personnel – risk of personal injury.
• Watch out for branches that are under pressure. Do not cut free-hanging branches from underneath.
• Never stand on the trunk when sawing off branches.
• The appliance is not intended to be used to cut down trees and branches in the woods.
• The power cord does not give the user the necessary freedom of movement – risk of personal injury.
• Always stand to the side of the tree being felled.
• Watch out for falling branches when you step back as the tree falls.
• Always stand uphill of or alongside logs lying on slopes. Never stand below them.
• Pull out the plug before checking and/or tensioning the chain, and when moving.
• Make sure you always have a firm footing and a firm grip on the handles. Check that the chain is not touching the ground or an object when starting the appliance.
• Do not overreach. Never saw above shoulder height. Never use the appliance from a ladder, tree or other unstable place.
• Hold the appliance in a safe position to prevent the risk of injury when pausing.

KICKBACK
Using the tool incorrectly, or in the wrong conditions, can cause kickback. The appliance kicks back and can cause fatal and/or serious personal injury. Do not rely on the safety mechanisms on the appliance. The correct use of the appliance is the only reliable method of reducing the risk of kickback. Kickback can be avoided by taking the following steps:

• Never start sawing with the tip of the bar.
• Never cut with the tip of the bar. Be careful when you resume a previous cut.
• The chain should always be running when it is applied.
• Always keep the chain correctly sharpened.
• Never cut more than one branch at a time. Be careful not to come into contact with other branches than the one you want to cut.
• Do not overreach. Never saw above shoulder height.

SYMBOLS

TECHNICAL DATA

Rated voltage  230 V ~ 50 Hz

Sound pressure level, LpA 88.7 dB(A), K = 3 dB Measured sound power level, LwA 100.3 dB(A), K = 3 dB
Guaranteed sound power level, LwA __104 dB(A), K = 3 dB Vibration level

Back handle: 1.353 m/s², K = 1.5 m/s² Front handle: 2.134 m/s², K = 1.5 m/s²

Always wear ear protection.
The declared vibration value, which has been measured by a standardised test method, can be used to compare different tools with each other and for a preliminary assessment of exposure. The measurement values have been determined in accordance with: EN ISO 11680-1:2011.

WARNING: The actual vibration level when using power tools may differ from the specified maximum value, depending on how the tool is used. It is therefore necessary to determine which safety precautions are required to protect the user, based on an estimate of exposure in actual operating conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in addition to the start- up time).

DESCRIPTION

1. Start inhibitor
2. Power switch
3. Plug
4. Shoulder strap
5. Lock knob for telescopic function
6. Knob to adjust sawing angle FIG. 1

ASSEMBLY

Fitting the telescopic handle

1. Put the telescopic handle in the opening in the motor unit and tighten the locking screw.
2. Undo the knob to adjust the length and adjust the telescopic handle to the required length.
3. Firmly tighten the knob. FIG. 2

Fitting the shoulder strap

1. Press the catch (A) and put the hook in the fastener (B).
2. Adjust the strap to the required length with the clasp. Swing the switched off pruning saw around a few times to check the balance.
3. Put the shoulder strap over your right shoulder and carry the pruning saw on the right side of your body.
4. Release the shoulder strap in the reverse order.

IMPORTANT

• Never use the shoulder strap diagonally over your chest, only on the right shoulder. This makes it easier to move the pruning saw away from your body in a dangerous situation.
• Switch off the pruning saw, pull out the plug and wait until all moving parts have completely stopped before cleaning and/or maintenance.
• Do not plug in the plug until the pruning saw is fully assembled. Failure to follow these instructions can result in the risk of fatal or serious personal injury and/or material damage.

Fitting the bar and chain

WARNING

Always wear safety gloves when handling the chain.

1. Undo the nuts that hold the guard and bar in place.
2. Remove the guard by pulling it straight out. This can require a certain amount of effort. FIG. 4
3. Put the chain round the bar. Make sure that the chain is put in the correct direction of rotation. FIG. 5
4. Put the bar on the bolts and put the chain round the sprocket behind the coupling. Make sure to align the links between the teeth on the sprocket.FIG. 6
5. Replace the guard and tighten the nuts by hand.FIG. 7
6. Tension the chain by turning the adjuster screw for the chain tensioning. Tension the chain according to the instructions in the section Checking and adjusting the chain tension.
7. Use a combination spanner and tighten the nuts holding the guard.

IMPORTANT  A new chain must be tensioned after no more than five cuts. Check the chain tension at regular intervals.

USE

Before starting

• Check the oil level. Fill the reservoir for the chain oil to about half of the level glass. Use chain oil of good quality.
• Check the chain tension and tighten the chain, if necessary, as described in the instructions for tensioning the chain.

Connection to mains

1. Put the power cord for the pruning saw in the de-tensioner before connecting to the mains. FIG. 8
2. Use an extension cord for outdoor use.

Starting

1. Start the pruning saw by first pressing forward the start inhibitor and then pressing the power switch.
2. Release the start inhibitor when the motor starts. FIG. 9

WARNING

• Never starting the pruning saw if the bar and chain are not correctly fitted.
• Check that the chain and bar are properly lubricated when sawing.

Switching off

1. Switch off the pruning saw by releasing the power switch.
2. The chain continue to move for a few seconds after the motor is switched off.

Adjusting the length of the telescopic handle

1. Switch off the pruning saw, pull out the plug and wait until all moving parts have completely stopped.
2. Release the knob for the telescopic function and adjust the telescopic handle to the required length.
3. Firmly tighten the knob.FIG. 10

Adjusting the sawing angle

1. Switch off the pruning saw, pull out the plug and wait until all moving parts have completely stopped.
2. Press in the lever to adjust the sawing angle and adjust the angle of the bar.
3. Make sure that the bar is locked in the required position.

MAINTENANCE

WARNING: Switch off the pruning saw, pull out the plug and wait until all moving parts have completely stopped before cleaning and/or maintenance.

• Always check the condition of the pruning saw before using it.
• Keep the ventilation opening on the pruning saw clean.
• Never clean the pruning saw with water. Clean the motor casing with a damp cloth. Never use detergents or solvents – these can damage the plastic parts on the pruning saw.
• Store the pruning saw with the supplied bar guard fitted.
• Only use accessories and spare parts recommended by the manufacturer.

Checking and adjusting the chain tension

IMPORTANT:

• It is very important that the chain is correctly tensioned. The chain works better and lasts longer if it is correctly tensioned. The sprocket, bar, chain and bearings get worn a lot quicker if the chain is not properly tensioned. Diagram 11 shows the correct tension for a cold chain (A), the correct tension of a hot chain (B), and when the chain needs to be adjusted (C).

• Always check the tension of the chain before starting and during the work.
  The chain is correctly tensioned when it rests against the underside of the bar, but can still be pulled along the bar by hand.

• A new chain must be tensioned after no more than five cuts. Once the chain has been run in it does not need to be adjusted as often.

1. Lift the tip of the bar and turn the adjuster screw for the chain tension clockwise to tension the chain.

2. Turn the adjuster screw anticlockwise to reduce the tension.

3. Check that the chain fits flush with the bar all round. FIG. 11
   NOTE: If it is difficult to pull the chain round by hand then it is too tight. Follow the instructions below to reduce the tension.

4. Undo the lock nuts for the bar.

5. Reduce the tension of the chain by slowly turning the adjuster screw anticlockwise.

6. Pull the chain backwards and forwards on the bar. The chain is correctly tensioned when it rests against the underside of the bar, but can still be pulled along the bar by hand. Increase the tension of the chain by turning the adjuster screw clockwise.

7. When the chain is correctly tensioned, hold up the tip of the bar and firmly tighten the two lock nuts. FIG. 12

Checking and filling the chain oil

1. Check at regular intervals that the automatic lubrication system is working properly.
2. Always check the oil level before use. FIG. 13
3. Fill the oil reservoir to about half of the level glass. Proper lubrication is essential to minimise the friction to the bar.
4. Start the pruning saw and run the chain about 20 cm over a suitable surface for 15 seconds. If the chain lubrication
   is working properly there should be splashing of oil on the surface. If there is no splashing, clean the oil outlet behind the bar and check that the flow of oil is not blocked. Check the oval seal is in place between the oil outlet and the bar.

NOTE: Never use the saw if the lubrication is not working properly. Inadequate lubrication results in the chain quickly going blunt and reduces its lifespan. It also overheats the bar and and will cause it to wear out. Smoke or discolouration of the bar are signs of inadequate lubrication.

Lubricating the sprocket

IMPORTANT

• Wear heavy-duty safety gloves when handling the bar and chain.
• Switch off the pruning saw, pull out the plug and wait until all moving parts have completely stopped before lubricating it.

The bar sprocket should be lubricated at intervals of 25 working hours, or once a week during intensive Use.

1. Clean the sprocket.
2. Press grease from the nozzle of the grease gun into the lubrication hole (see arrow) until it comes out by the edge of the bar. A grease gun with a slim nozzle simplifies effective lubrication. FIG. 14
3. Pull round the chain by hand. Repeat until all the sprocket has been lubricated.

NOTE:

• It is not necessary to remove the chain to lubricate the sprocket.
• Clean the sprocket before lubricating it.
• Failure to follow the instructions for lubricating the sprocket can cause it to seize, and will invalidate the warranty.

Sharpening the chain

WARNING

• A worn or incorrectly filed chain can result in kickback, which can result in fatal and/or serious personal injury.

• Wear heavy-duty safety gloves when handling the bar and chain.

• The filing should be done with a special tool to ensure that the chain has the right angles and height.

• All the drive links should have the same height. Different heights of the drive links will cause the chain to run out of balance and damage it.

• The minimum height of the drive links is 4
  mm. Discard the chain if they are less. The angles of the cutting edges must be maintained. File with 2 or 3 strokes from inside and out.

• File the chain with a round file. Always file the cutting edges from inside and out. Pay attention to the values given in the diagrams. After filing all the drive links should have the same width and height.

• The height of the rakers should be checked after 3 – 4 filings. If necessary, file down the rakers with a file template and flat file.

IMPORTANT

• A sharp chain produces a good size of chips. When sawing produces small chips or dust it is time to file the chain.
• Correct filing of the rakers is just as important as filing the cutting edges of the chain.

Bar

• Turn the bar round every 8 working hours to ensure that it wears uniformly.
• Use a cleaning tool to keep the groove and lubrication holes clean (sold separately).
• Check the bar at regular intervals for wear and damage, and replace if necessary.
• Clean the oil channels on the bar to ensure proper lubrication of the bar and chain.

WARNING: Never fit a new chain on a worn sprocket or worn guide ring.

EU DECLARATION OF CONFORMITY

• Item number

Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer

POLE SAW
Conforms to the following directives, regulations and standards:

• Name and address of the notified body involved:
• This product was CE marked in year:

BUSINESS AREA MANAGER (Signatory for Jula and authorised to compile the technical documentation.

WWW.JULA.COM

References

• Jula – products for home and garden

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>