Lanmi T19 TWS True Wireless Earbuds User Guide

Lanmi T19 TWS True Wireless Earbuds

Table of Product Contents

• Charging Case*1

• Wireless Earbud”‘2

• Type-C Charging Cable*1

• Instruction Book

Product Specification

Bluetooth Version: ___ 5.3
Support: __ HFP/A2DP/HSP/AVRCP
Charging Port: __ Jype-C

Battery life: 7-8 hours (earbuds) + 32 hours (4 times full charge with box) Charging time: 1.5 hours for earbuds / 2 hours for charging case
Transmission range: ___ 15 meters (without obstacles)

Introduction

How do I pair two headphones with my phone?

• Please make sure both the carbuds and the charging case arc fully charged before first use.

• Step1
  Take both earbuds out of the charging case and both earbuds will power on and start pairing automatically (If the earbuds are not connected to your device for more than .”5 minules,the earburls will automatically turn off. Press the MFB button for about 3 seconds to manually Turn on the earburls when prompted “Power on”.) When the earbuds are connected to each other, the LED light will flash quickly. if they connect successfully, the earbuds T.F.D light will flash slowly.

• Stop2
  Enable the Bluetooth pairing mode on your phone device, search and select ”Tl9″ to connect. (You should hear a voice prompt ”Connected” when wearing earbuds).

• If indicator light of earbud is off,it means the phone is connected
  

• Automatic connection
  By default, the earbuds will conned. the laql paired phone Automatically when power on.

• Prompt

1. lf you have any problem pairing the two earbuds with your phone, put the earbud back in the charging case and repeat the above steps.
   Or refer to the reset steps of .Frequently Asked Questions in the manual.

2. These earbuds can be used not only together, but also individually
   If you want lo use single earbud,just take one earbud out. of the case and connect it.
   to your phone. or when using 1.wo earbuds, manually turn off one earbud or pu1 one back in I.he charging caqe and you’ll be able to use the other one earbud alone.

Functions

• Telephone Communication

Answer call:———————————————————-tap once
Hang up: _____ press and hold the key for 2s
Refuse incoming call:—————————————press and hold the key for 2s

• For Music

Play/pause ————————————— tap twice
previou track———————– press and hold nr for 2s
Next track—————————-press and hold “R11 for 2s
Activate siri———————– quickly tap for three times
Turn down volume ____ single tap on left earbud
Turn up volume _____ single tap on right earbud

Charging

• Farhuds Charging
  The earbuds will only be charged when you correctly place them in the charging slots and close the lid.(You can charge the charging case and the earbuds at the same time, or you can charge the charging case first and then the ear buds.
  The indicator light will show red while charging.
  The charging case will stop charging automatically and the indicator light on carbuds will go out when fully charged.
  When the carbuds arc charging in the charging case, the L.ED bar of the case will keep blink. The charging case will stop charging automatically and the indicator
  light on carbuds will go out when fully charged.

• Case. Charging
  There is a Type-c usb charging cable in the package, please use it to charge the case directly. During charging, the digital display will flash and display the battery level in real time. When fully charged, the number shows 100.
  

Charging Alerts

• After using it for a long period of time, due to the oxidation of the magnet connector, the ear bud~ might not be charged or even turned on.
  You can fix this problem thy deaning the magne! connectors on lhe earbuds and charging case v.-ilh an alcohol wipe

• Put the earbuds in the charging case, the earbuds will turn off immediately and the charging case will start to charging automatically. The earbuds will connect the last paired mobile automatically.

Storage and Maintenance

• if the earbud.s have nol. been used for more than 3 months, we recommend that.you
• Please use an charger approved by FCC (Federal Communications Commission).
• Do not dissemble the earbuds.
• Children aged 12 and under require adult supervision.
• Do not expose the earbuds to high or low temperatures, and do not use the earbuds during a thunderstorm.
• Avoid free fall or violent shock to the device. Keep the device away from sources of fire and do not place the device in water.

Frequently Asked Questions

Q : Why don’t these carhuds pair with my phone?
A : Make sure the earbuds are fully charged and powered on.
Make sure your phone’s Tiluel.ool.h is enabled Tf there is no problem ,vith the two points stated above, tuTTI off the powered-on earbuds after S continuous and quick dicks.
Put them back into the charging case and dose the lip, wait for l minute, then open the charging case and rccollIK.”C.t the carbuds to the phone.
Q : Why does the music cut in or out?
A : Firsl, “keep the earbuds no more than 15m away from your phone (no obstacles).
if the distance is less than 15m, follow these steps:

1. Put the car buds back into the case and dose the lid, manually click “forget theTl9” on your phone
2. After 10 seconds, open the charging case and reconnect these earbud swithr ourphone

Q : Why the earbud.s still won’t be charged or disconnect from the phone after I put them
in the case and close the lid?
A : Make sure the charging case is not in a low battery state.
If the charging case is in a low battery state, the ear buds will neither be charged nor disconnected.
In this case, please use a typ~ charging cable to fully charge the case.
Q : Are these earbuds sweat- and water-resistant?
A : These earbuds are sweat proof and slightly waterproof.
For electronic devices, we do not recommend that you submerge the earbud.s in water.
For more detailed product FAQs, please contact our customer service.
Activation & Warranty No reason to return or exchange within 30 days, and provide after-sales service within 180 days. Please activate via email below within 15 days.
earbudsvip28@gmail.com

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
   undesired operation.

Any Changes or modifications n t expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>