ENDLESS SUMMER GAD15310ES Liberty LP Gas Outdoor Fire Pit Owner’s Manual
- June 8, 2024
- Endless Summer
Table of Contents
- GAD15310ES Liberty LP Gas Outdoor Fire Pit
- Important Safeguards
- Parts List
- Expanded View
- Tools Required for Assembly (Not Included)
- 2 Phillips Head Screwdriver 1 pc
- Assembly Instructions
- IMPORTANT BEFORE USE HOW TO SEASON LAVA ROCK
- Installing LP Gas Tank
- Operating Instructions
- Cleaning and Care
- Product Registration
- Limited Warranty
- Documents / Resources
OWNER’S MANUAL
“Liberty”
LP Gas Outdoor Fire Pit
Model No. GAD15310ES
GAD15310ES Liberty LP Gas Outdoor Fire Pit
DANGER
CARBON MONOXIDE HAZARD
- This appliance can produce carbon monoxide which has no odor.
- Using it in an enclosed space can kill you.
- Never use this appliance in an enclosed space such as a camper, tent, car or home.
WARNING
FOR OUTDOOR USE ONLY.
**Installation and service must be performed by a qualified installer,
service agency or gas supplier.
WARNING
FOR YOUR SAFETY:
** If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury or loss of life.
**** WHAT TO DO IF YOU SMELL GAS:
-
Do NOT try lighting any appliance.
-
Do NOT touch any electrical switch; do
NOT use any phone in your building. -
Immediately call your gas supplier from a neighbor’s phone.
-
Follow the gas supplier’s instructions.
-
If you cannot reach your gas supplier, call the fire department.
****Do Not Use For Cooking.
WARNING
FOR YOUR SAFETY:
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
WARNING
FOR YOUR SAFETY:
Improper installation, adjustment, alteration, service or maintenance can
cause injury or property damage.
Read the installation, operation and maintenance instructions thoroughly
before installing or servicing this equipment.
DANGER
FIRE OR EXPLOSION HAZARD
If you smell gas:
- Shut off gas to appliance.
- Extinguish any open flame.
- If odor continues, leave the area immediately.
- After leaving the area, call your gas supplier or fire department.
Failure to follow these instructions could result in fire or explosion, which could cause property damage, personal injury, or death.
WARNING
FOR YOUR SAFETY:
- Do not store or use gasoline, or other flammable vapors and liquids, in the vicinity of this or any other appliance.
- An LP-cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.
The use and installation of this product must conform to local codes . In
absence of local codes, use the latest edition of the National Fuel Gas Code,
ANSI Z223.1/NFPA 54, or International Fuel Gas Code. This appliance, when
installed, must be electrically grounded in accordance with local codes, or in
the absence of local codes with the National Electrical Code, ANSI/NFPA 70, if
applicable .
For installation in Canada – these instructions, while generally acceptable,
do not necessarily comply with the Canadian installation codes, particularly
with piping above and below ground . In Canada the installation of this
appliance must comply with local codes and/or standard CAN/CGA B149 .1
(installation code for propane burning appliances and equipment) .
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION . PLEASE READ
AND KEEP FOR FUTURE REFERENCE .
If you are assembling this unit for someone else, give this manual to them to
read and save for future reference .
WARNING: This product can expose you to chemicals, including carbon
monoxide, soot, lead and lead components which are known to the State of
California to cause cancer, birth defects, and other reproductive harm . Wash
your hands after handling this product . For more information go to
www.P65Warnings.ca.gov .
Important Safeguards
DANGER • FLAMMABLE GAS UNDER PRESSURE.
LEAKING LP-GAS MAY CAUSE A FIRE OR EXPLOSION IF IGNITED CAUSING SERIOUS BODILY
INJURY OR DEATH.
CONTACT LP GAS SUPPLIER FOR REPAIRS, OR DISPOSAL OF THIS CYLINDER OR UNUSED
LP-GAS.
WARNING • FOR OUTDOOR USE ONLY.* DO NOT USE OR STORE CYLINDER IN A
BUILDING, GARAGE OR ENCLOSED AREA.
WARNING:
- Know the odor of LP-gas. If you hear, see or smell leaking LP-gas, immediately get everyone away from the cylinder and call the Fire Department. Do not attempt repairs.
- Caution your LP-gas supplier to: Be certain cylinder is purged of trapped air prior to first filling. Be certain not to over fill the cylinder. Be certain cylinder requalification date is checked.
- LP-gas is heavier than air and may settle in low places while dissipating.
- Contact with the liquid contents of cylinder will cause freeze burns to the skin.
- Do not allow children to tamper or play with cylinder.
- When not connected for use, keep cylinder valve turned off. Self contained appliances shall be limited to a cylinder of 30 lb capacity or less.
- Do not use, store or transport cylinder where it would be exposed to high temperatures. Relief valve may open allowing a large amount of flammable gas to escape.
- When transporting, keep cylinder secured in an upright position with cylinder valve turned off.
WHEN CONNECTING FOR USE:
-
Use only in compliance with applicable codes.
-
Read and follow manufacturer’s instructions.
-
Consult manufacturer’s instructions concerning the cylinder connection provided with your appliance.
-
Be sure regulator vent is not pointing up.
-
Turn off all valves on the appliance.
-
Do not check for gas leaks with a match or open flame.
Apply soapy water at areas marked “X”. Open cylinder valve. If bubble appears, close valve and have LP-gas service person make needed repairs. Also, check appliance valves and connections to make sure they do not leak before lighting appliance. -
Light appliance(s) following manufacturer’s instructions.
-
When appliance is not in use, keep the cylinder valve closed.
DO NOT REMOVE, DEFACE, OR OBLITERATE THIS LABEL
*EXCEPT AS AUTHORIZED BY ANSI/NFPA 58.
DANGER. Do not store a spare LP cylinder under or near a barbecue grill,
or other heat sources.
NEVER fill an LP cylinder beyond 80% full: a fire causing death or serious
injury may occur.
DANGER: Failure to follow the dangers, warnings and cautions in this
manual may result in serious bodily injury or death, or in a fire or an
explosion causing damage to property.
WARNINGS:
Do NOT use this outdoor fire pit without reading the entire owner’s
manual.
This appliance is for outdoor use only, and should NOT be used in a
building, garage or any other enclosed area.
Do NOT operate, light or use this appliance within ten feet (3.05 m) of
walls, structures or buildings.
For residential use only. This outdoor fire pit is NOT for commercial
use.
Do NOT use this outdoor fire pit for indoor heating. TOXIC carbon
monoxide fumes can accumulate and cause asphyxiation.
This outdoor fire pit is safety certified for use in the United States
and/or Canada only.
Do NOT modify for use in any other location. Modification will result in
a safety hazard and will void your warranty.
Apartment dwellers: Check with management to learn the requirements and
fire codes for using a liquid propane (LP) gas outdoor fire pit in your
apartment complex. If allowed, use outside on the ground floor with a ten foot
(3.05 m) clearance from any structure. Do NOT use on or under balconies.
This outdoor fire pit, from the factory, is for use with LP gas only.
The conversion to or attempted use of natural gas in this outdoor fire pit is
dangerous, may cause bodily harm and will void your warranty.
LP gas characteristics:
a. LP gas is flammable and hazardous if handled improperly. Become aware of
the characteristics before using any LP gas product.
b. LP gas is explosive under pressure, heavier than air, and settles/ pools in
low areas.
c. LP gas in its natural state has no odor. For your safety, an odorant is
added that smells like rotten cabbage.
d. Contact with LP gas can cause freeze burns to skin.
LP gas tank needed to operate. Only tanks marked “propane” may be used.
a. The LP gas cylinder must be constructed and marked in accordance with the
U.S. Department of Transportation (D.O.T.) Specifications for LP-Gas
Cylinders, or the Standard for Cylinders, Spheres and Tubes for the
Transportation of Dangerous Goods and Commission, CAN/ CSA-B339 as applicable.
b. LP gas tank must be arranged for vapor withdrawal.
c. The LP gas tank must have a listed overfilling prevention device (OPD) and
a QCCI or Type I (CGA810) LP gas tank connection.
d. The LP gas tank must have a tank collar to protect the tank valve.
e. Never use an LP gas tank with a damaged body, valve, collar or footing.
f. Dented or rusted LP gas tanks may be hazardous and should be checked by
your LP gas supplier prior to use.
g. The LP gas tank should not be dropped or handled roughly.
h. Tanks must be stored outdoors, out of the reach of children and must not be
stored in a building, garage or any other enclosed area. Your LP gas tank must
never be stored where temperatures can reach over 125°F.
i. Do NOT insert any tool or foreign object into the valve outlet or safety
relief valve. You may damage the valve and cause a leak. Leaking propane may
result in explosion, fire, severe personal injury or death.
j. Never keep an LP gas tank in a hot car or trunk. Heat will cause the gas
pressure to increase, which may open the relief valve and allow gas to escape.
k. Place dust cap on cylinder valve outlet whenever the cylinder is not in
use. Only install the type of dust cap on the cylinder valve outlet that is
provided with the cylinder valve. Other types of caps or plugs may result in
leakage of propane.
L. Do NOT store a spare LP gas tank under or near this appliance.
m. Never fill the cylinder beyond 80 percent full.
n. A fire causing serious injury or damage to property may occur if the above
is not followed exactly.
Your outdoor fire pit has been checked at all factory connections for
leaks. Recheck all connections as described in the “Operating Instructions”
section, as shipping can loosen connections.
Check for leaks even if your unit was assembled for you by someone else.
Do NOT operate if a gas leak is present. Gas leaks may cause a fire or
explosion.
You must follow all instructions in the “Checking for Leaks” section
before operating. To prevent a fire or explosion when testing for a leak:
a. Always perform a leak test before lighting this outdoor fire pit and each
time the tank is connected for use.
b. No smoking. Do NOT use or permit sources of ignition in the area while
conducting a leak test.
c. Conduct the leak test outdoors in a well-ventilated area.
d. Do NOT use matches, lighters or a flame to check for leaks.
e. The use of alcohol, prescription or non-prescription drugs may impair the
consumer’s ability to properly assemble or safely operate the appliance.
f. Strong odors, colds, sinus congestion, etc. may prevent the detection of
propane. Use caution and common sense when testing for leaks.
g. Do NOT use this outdoor fire pit until any and all leaks are corrected.
If you are unable to stop a leak, disconnect the LP gas supply. Call a gas
appliance serviceman or your local LP gas supplier.
Do NOT store or use gasoline or other flammable liquids or vapors within
25 feet (7.62 m) of this appliance.
Do NOT use in an explosive atmosphere. Keep outdoor fire pit area clear
and free from combustible materials, gasoline and other flammable vapors and
liquids.
This outdoor fire pit is NOT to be operated by children.
This outdoor fire pit is NOT to be used in or on boats or recreational
vehicles.
Do NOT connect to a remote gas supply.
Never attempt to attach this outdoor fire pit to the self-contained LP
gas system of a camper trailer, motor home or house.
Always use in accordance with all applicable local, state and national
codes. Contact your local fire department for details on outdoor burning.
When using this outdoor fire pit, exercise the same precautions you would
with any open fire.
Do NOT burn solid fuels such as: wood, charcoal briquettes, lump
charcoal, manufactured logs, driftwood, trash, leaves, paper, cardboard,
plywood, painted/stained/pressure treated wood in this outdoor fire pit.
W It is essential to keep the outdoor fire pit’s valve compartment, burners,
and circulating air passages clean. Inspect outdoor fire pit before each use.
Do NOT use this outdoor fire pit until it is COMPLETELY assembled and all
parts are securely fastened and tightened.
Do NOT use this outdoor fire pit near automobiles, trucks, vans or
recreational vehicles.
Do NOT use this outdoor fire pit under any overhang or near any
unprotected combustible constructions. Avoid using near or under overhanging
trees and shrubs.
Always use this outdoor fire pit on a hard, level, non-combustible
surface such as concrete, rock or stone. An asphalt or blacktop surface may
not be acceptable for this purpose.
Do NOT use this outdoor fire pit for cooking.
Do NOT use this appliance if any part has been under water.
Immediately call a qualified service technician to inspect the appliance and
to replace any part or control system and any gas control which has been under
water.
Do NOT wear flammable or loose clothing when operating this outdoor fire
pit.
Do NOT use in windy conditions.
Never lean over this outdoor fire pit when lighting or when in use.
Do NOT use this outdoor fire pit unless burner is securely in place.
Keep all electrical cords away from this outdoor fire pit during use.
Certain areas of this outdoor fire pit when in use will become too hot to
touch. To avoid burns, do NOT touch hot surfaces until the unit has completely
cooled (about 45 minutes), unless you are wearing protective gear (such as
insulated pot holders or heat-resistant gloves/ mittens).
Do NOT leave a lit outdoor fire pit unattended, especially around
children and pets.
Children and adults should be alerted to the hazards of high surface
temperatures and should stay away to avoid burns or clothing ignition.
Young children should be carefully supervised when they are in the area
of the appliance.
Do NOT hang or place clothing or other flammable material on or near this
appliance.
Any guard or other protective device removed for servicing the appliance
must be replaced prior to operating the appliance.
If applicable, protective cover must be removed when burner is in
operation.
Do NOT attempt to move outdoor fire pit when in use. Allow the outdoor
fire pit to cool before moving or storing.
This outdoor fire pit should be thoroughly cleaned and inspected on a
regular basis. Clean and inspect the hose before each use of the appliance. If
there is evidence of abrasion, wear, cuts, or leaks, the hose must be replaced
prior to the appliance being operated.
This outdoor fire pit should be inspected at least annually by a
qualified service person. Depending on amount of use, more frequent cleaning
may be required. Do NOT operate until all parts have been repaired or
replaced.
Use only the regulator and hose assembly provided. Use only the
replacement regulator and hose assembly specified by Mr. Bar-B-Q Products LLC.
Use only Mr. Bar-B-Q Products LLC factory-authorized parts. The use of
any part that is not factory-authorized can be dangerous and will void your
warranty.
Use only Mr. Bar-B-Q Products LLC factory-authorized lava rock/fire
glass. The use of any lava rock/fire glass that is not factory-authorized can
be dangerous and will void your warranty.
Do NOT operate this appliance without reading “Operating Instructions” in
this manual.
Storage of this outdoor fire pit indoors is permissible only if the tank
is disconnected, removed from the outdoor fire pit and properly stored
outdoors.
Do NOT attempt to disconnect the gas regulator from the tank or any gas
fitting while the outdoor fire pit is in use.
If the outdoor fire pit is not in use, the gas must be turned off at the
supply tank.
CAUTION: The gas pressure regulator provided with this appliance must be
used. This regulator is set for an outlet pressure of 11 inches water column.
The minimum inlet gas pressure for this outdoor fire pit is 11 inches of
water column, for the purpose of input adjustment.
The maximum inlet gas pressure for this outdoor fire pit is 11 inches of
water column.
Before pressure testing, close LP gas tank valve and disconnect gas
regulator. The gas supply piping system must test at pressures equal to or
less than 1/2 psi (3.5 kPa).
Do NOT sit or stand on the mantel or any part of this appliance.
Do NOT throw anything onto the fire when the unit is in operation.
Lava rock/fire glass are very hot. Keep children or pets at a safe
distance from this appliance.
When heated, lava rock/fire glass may pop.
The opening of the tank collar should face toward the door side for easy
access.
Do NOT store any combustible materials in the base enclosure.
Use protective gloves when assembling this product.
Do NOT force parts together as this can result in personal injury or
damage to the product.
****Death, serious injury or damage to property may occur if the above is not
followed exactly.
Parts List
1 | White Fire Glass | GLS-WHT |
---|---|---|
2 | Table Insert | 58-24-650 |
3 | Bowl Assembly* | 58-24-047 |
4 | Igniter Cover* | 58-24-048 |
5 | Burner* | 58-24-049 |
6 | Control Knob* | 58-24-050 |
7 | Battery Cap* | 58-24-051 |
8 | Regulator/Hose Assembly* | 58-24-052 |
9 | Mantel | 58-24-651 |
10 | Side Panel (3) | 58-24-571 |
11 | Leg A (2) | 58-24-066 |
12 | Leg B | 58-24-067 |
13 | Leg C | 58-24-068 |
14 | Magnet(2)* | 58-24-056 |
15 | Door | 58-24-572 |
16 | Door Knob* | 58-24-069 |
17 | Foot (4)* | 58-23-147 |
18 | Base | 58-24-060 |
19 | LP Gas Tank Retainer Bolt* | 58-24-062 |
20 | Cover | 58-24-063 |
21 | Lava Rock (not required and sold separately)** | 55-05-833 |
* Pre-assembled
**CAUTION: Use only Mr. Bar-B-Q Products LLC factoryauthorized fire
glass/lava rock. The use of any fire glass/lava rock that is not factory-
authorized can be dangerous and will void your warranty.
WARNING
When heated, lava rocks may react by breaking and throwing fragments of rock.
Be sure to season the lava rocks at a high temperature before use in order to
avoid potential personal injury or damage.
IMPORTANT BEFORE USE HOW TO SEASON LAVA ROCK ON PAGE 8.
Expanded View
Scan QR Codes – For Additional Help
HOW TO LIGHT AN ELECTRONIC IGNITERhttps://youtu.be/aFWb1YYnRo0
SCAN FOR ASSEMBLY VIDEO
| Hardware Pack| 58-23-862|
---|---|---|---
A| Screw| M5x12 Black Nickel Plated Truss Head| 16 pcs
B| Screw| M6X12 Black Nickel Plated Truss Head| 4 pcs
C| Screw| M6X12 Black Nickel Plated Step Head| 1 pc
D| AA Batter| | 1 pc
Tools Required for Assembly (Not Included)
2 Phillips Head Screwdriver 1 pc
Assembly Instructions
-
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.888.398.8643 toll-free . Please have your owner’s manual and model number available for reference .
Note: The model number is printed on a label which can be found on the inside door, back or side of the base assembly .
Assembly Tips:
1 . Select an area where you will assemble this product . To protect components, choose a smooth surface that’s free of cracks or openings .
2 . Spread out all parts .
3 . Tighten all hardware connections by hand first . Then, before completing each step, go back and fully tighten all hardware . Be careful not to over- tighten .
That could damage surfaces or strip threads .
4 . For best results, complete each step in the order presented .
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the solution are included in the “Operating Instructions” section of this manual) .
• (1) Precision-filled LP gas grill tank with Acme Type 1 external threaded valve connection (standard grill size) (not included) .
Typical assembly is approximately one hour .
CAUTION: Two (2) people will be required for assembly.
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this appliance may result in property damage or personal injury. -
Attach Legs
CAUTION: Two (2) people will be required to turn the outdoor fire pit over.
CAUTION: To avoid scratches choose a smooth surface that’free of cracks or openings.
Note: Do not fully tighten srews until step 5 . -
Attach Side and Rear Panels
Note: Attach bottom screws before attaching top screws . Do not fully tighten screws until step 5 . -
Attach Base
Note: Tighten all screws from step 2-5. -
Attach Door and Turn Outdoor Fire Pit Over
CAUTION: Two (2) people will be required to turn the outdoor fire pit upright on feet. -
Place Fire Glass – Wear protective gloves
CAUTION: Do NOT dump glass rocks out of package. Carefully place glass rocks by hand so dust does not clog burner.
CAUTION: Wear protective gloves.
CAUTION: Use only Mr. Bar-B-Q Products LLC factoryauthorized fire glass. The use of any fire glass that is not factory-authorized can be dangerous and will void your warranty.
CAUTION: Do NOT cover igniter.
Note: Fire glass should be 0 .8-1 .6 in (2-4 cm) diameter . Approx . 13 .2 lbs (6 kg) of fire glass is needed . -
Place Table Insert
WARNING: NEVER place table insert on outdoor fire table while in use.
WARNING: NEVER place table insert on outdoor fire table while the outdoor fire table is still hot. -
Insert Battery
Note: Remove plastic wrapper before installing battery . -
Store Table Insert
Hang the table insert on the inner side of door.
WARNING: NEVER place table insert onto outdoor fire pit while in use.
WARNING: NEVER take out and place table insert onto outdoor fire pit while the outdoor fire pit is still hot. -
OPTIONAL ITEM SOLD SEPARATELY
Place Lava Rocks – Wear protective gloves
CAUTION: When switching from fire glass, remove all fire glass before placing lava rock.
CAUTION: Do NOT dump lava rocks out of package. Carefully place lava rocks by hand so dust does not clog burner.
CAUTION: Wear protective gloves.
CAUTION: Use only Mr.Bar-B-Q Products LLC. factoryauthorized lava rock. The use of any lava rock that is not factory-authorized can be dangerous and will void our warranty.
CAUTION: Do NOT cover igniter.
Note: Lava rocks should be 0 .8-2 .0 in . (2-5 cm) diameter . Approx . 6 .6 lbs . (3 kg) of lava rocks are needed .
IMPORTANT BEFORE USE HOW TO SEASON LAVA ROCK
- Place the lava rocks into the fire pit bowl before turning on.
- Follow the lighting instructions from the owner’s manual to light the fire pit.
- Turn the fire pit to the highest heat.
- Allow the lava rocks to heat at the maximum temperature for 30 minutes before enjoying fire pit.
- Keep all people and any material that could burn at least 15 feet away from the fire pit while the lava rocks are being seasoned.
- Repeat the process if your fire pit has been exposed to rain or moisture.
- Keep your fire pit covered when not in use.
WARNING: WHEN HEATED, LAVA ROCK MAY POP AND THROW FRAGMENTS. STAY BACK TO AVOID INJURY.
Installing LP Gas Tank
To operate, you will need one precision-filled standard grill LP gas tank with
external valve threads .
CAUTION: LP gas tank must be properly disconnected and removed prior to
moving this outdoor fire table.
Inserting LP Gas Tank
WARNING: Make sure LP gas tank valve is closed.
- Open door .
- Loosen LP gas tank retainer bolt by turning counter-clockwise .
- Place precision-filled LP gas tank upright into hole in outdoor firepit base so the tank valve is facing the gas line connection .
- Secure tank by turning LP gas tank retainer bolt clockwise until tight .
- Close door .
Connecting LP Gas Tank
- Make sure the control knob is in the “ OFF” position (Figure 3) .
- Before connecting, be sure there is no debris caught in the head of the LP gas tank, head of the regulator valve or in the head of the burner or burner ports .
- Connect regulator/hose assembly to tank by turning knob clockwise until it stops .
- Perform leak check per “Checking for Leaks” section .
Disconnecting LP Gas Tank
-
Make sure the control knob is in the “ OFF” position (Figure 3) .
-
Before disconnecting, make sure the LP gas tank valve is “CLOSED .”
-
Disconnect regulator/hose assembly from LP gas tank by turning knob counterclockwise until it is loose .
CAUTION: LP gas tank must be properly disconnected and removed prior to moving this outdoor fireplace. -
Place the protective cap cover on the LP tank and store the tank outdoors in a well ventilated area out of direct sunlight .
-
Place the regulator/hose assembly on Regulator/Hose Assembly “S” Hook . See step 8 .
Operating Instructions
Checking for Leaks
WARNING: Before using this outdoor fire table, make sure you have read,
understand and are following all information provided in the “Important
Safeguards” section on page 2. Failure to follow those instructions can cause
death, serious injury or property damage.
WARNING: The burner must be replaced prior to the appliance being put
into operation if it is evident that the burner is damaged. The replacement
burner shall be that specified by the manufacturer.
Burner Connections
- Make sure the regulator hose and valve connections are securely fastened to the burner and the tank .
- Visually check the connection between the burner/venturi tube and orifice .
- Make sure the burner/venturi tube fits over the orifice . WARNING: Failure to inspect this connection or follow these instructions could cause a fire or an explosion which can cause death, serious bodily injury or damage to property.
- Refer to diagram for proper installation (Figures 1 and 2) .
- If the burner/venturi tube does not rest flush to the orifice, as shown, please contact 1 .888 .398 .8643 for assistance .
Tank/Gas Line Connection
- Make 2-3 oz . of leak detection solution by mixing one part liquid dishwashing soap with three parts water .
- Make sure control knobs are in the “ OFF” position (Figure 3) .
- Connect LP gas tank per “Installing LP Gas Tank” section .
- Turn LP gas tank valve to “OPEN .”
- Spoon several drops of solution, or use a squirt bottle, at all “X” locations (Figures 1 and 2) .
a . If any bubbles appear, turn LP gas tank valve to “CLOSED,” reconnect and re-test .
b . If you continue to see bubbles after several attempts, turn LP gas tank valve to “CLOSED” and disconnect LP gas tank, per
“Disconnecting LP Gas Tank” section . Contact 1 .888 .398 .8643 for assistance .
c . If no bubbles appear after one minute, turn LP gas tank valve to “CLOSED,” wipe away solution and proceed .
Lighting
WARNING: NEVER light the burner with the cover on the outdoor fire table.
CAUTION: Keep outdoor gas appliance area clear and free from combustible
materials, gasoline and other flammable vapors and liquids.
CAUTION: Do NOT obstruct the flow of combustion and ventilation air.
CAUTION: Check and clean burner/venturi tubes for insects and insect
nests. A clogged tube can lead to a fire.
-
Make sure all labels, packaging and protective films have been removed from the outdoor fireplace .
-
Check for obstructions of airflow to the burner . Spiders, insects and webs can clog the burner/venturi tube . A clogged burner tube can lead to a fire .
-
Control knob must be in the “ OFF” position (Figure 3) .
-
Clear small area of fire glass/lava rock away from the igniter cover (Figure 4) .
-
Connect LP gas tank per “Installing LP Gas Tank” section .
-
Turn LP gas tank valve to “OPEN .”
-
Push and turn control knob to (HIGH) . Continue to hold the control knob in to light .
-
After the fire table lights, continue to hold the control knob in for 20 seconds to heat the thermocouple, a safety device that stops the gas flow when a firepit is not lit . Holding the knob in for 20 seconds warms it up so the gas flow will continue .
-
After 20 seconds, release and turn control knob counterclockwise to adjust flame to desired height .
-
After three attempts, if ignition does not occur, turn the burner control knob to “ OFF .”
-
Wait 5 minutes, fan with a newspaper or magazine, and repeat lighting procedure .
-
If igniter does not light burner:
a . Wearing heat-resistant gloves, position a lit long match or lit long butane lighter near the pilot housing .
b . Push and turn control knob to (HIGH) . -
After lighting, observe the burner flame . Make sure all burner ports are lit and flame height matches illustration (Figure 5) .
CAUTION: If ignition does not occur in 5 seconds, turn control knob to “ OFF,” wait 5 minutes, fan with a newspaper or magazine, and repeat lighting procedure.
Turning Off
-
Turn LP gas tank valve to “CLOSED .”
-
Turn control knob to the “ OFF” position .
Note: A “poof” sound is normal as the last of the LP gas is burned . -
Disconnect LP gas tank per “Disconnecting LP Gas Tank” section .
Cleaning and Care
CAUTION:
- All cleaning and maintenance should be done when outdoor fire pit is cool and with the fuel supply disconnected.
- Do NOT clean any outdoor fire pit part in a self-cleaning oven. The extreme heat will damage the finish.
- Do NOT enlarge valve orifices or burner ports when cleaning the valves or burners.
- All components on this outdoor fire pit can become hot.
- Do NOT clean this outdoor fire pit until all components are cool.
Notices
- This outdoor fire table should be thoroughly cleaned and inspected on a regular basis.
- Abrasive cleaners will damage this product.
- NEVER use oven cleaner to clean any part of this outdoor fire table.
Before Each Use:
- Keep the outdoor fire table area clear and free from any combustible materials, gasoline, and other flammable vapors and liquids .
- Do NOT obstruct the flow of the combustion of LP gas and the ventilation of air .
- Keep the ventilation opening(s) of the LP gas tank area free and clear from debris .
- Visually check the burner flames to make sure your outdoor fire table is working properly (Figure 5) .
- See below for proper cleaning instructions .
- Check all gas connections for leaks .
- Check components for any signs of damage or rust .
- Check for obstructions of airflow to the burner . Spiders, insects and webs can clog the burner/venturi tube . A clogged burner/venturi tube can lead to a fire .
- If damage to any component is detected, do NOT operate until repairs are completed .
Cleaning Surfaces
- Wipe surfaces clean with mild dishwashing detergent or baking soda mixed with water .
- For stubborn stains, use a citrus-based cleaner and a nylon scrubbing brush .
- Rinse clean with water .
- Allow to air dry .
Cleaning Burner
WARNING: All cleaning should be done when appliance is cool and with the
fuel supply disconnected per “Disconnecting LP Gas Tank.”
- Remove the fire glass/lava rock
- Remove all dirt/dust from the burner, igniter cover and venturi area with a small brush and/ or compressed air .
- Visually inspect the burner for any rust or damage . If damage is found, replace necessary parts with new from the manufacturer .
- Clean any clogged burner ports with a stiff wire (such as an opened paper clip) .
- Carefully replace the fire glass/lava rock being cautious not to block the igniter cover .
Before Storing
-
Turn LP gas tank valve to “CLOSED .”
-
Turn control knob to the “ OFF” position .
Note: A “poof” sound is normal as the last of the gas is burned . -
Disconnect LP gas tank per “Disconnecting LP Gas Tank” section .
-
Clean all surfaces .
-
Lightly coat the burner with cooking oil to prevent excess rusting .
CAUTION: NEVER place cover on hot outdoor fire table. -
If storing the outdoor fire table indoors, cover the outdoor fire table and store in a cool drlocation away from children and pets .
-
If storing the outdoor fire table outdoors, cover the outdoor fire table with a cover for protection from the weather .
Product Registration
For faster warranty service, please register your product immediately . To
register, email registration@mrbarbq.com
with your name, address, phone number and copy of your receipt or call 1
.888 .398 .8643 .
Replacement Parts
For replacement parts, call 1 .888 .398 .8643 .
Limited Warranty
Mr . Bar-B-Q Products LLC warrants to the original retail purchaser of this
product, and to no other person, that if this product is assembled,
maintained, and operated in accordance with the printed instructions
accompanying it, then for a period of one (1) year from the date of purchase,
all parts in such product shall be free from defects in material and
workmanship . Mr . Bar-B-Q Products LLC may require reasonable proof of your
date of purchase . Therefore, you should retain your sales slip or invoice .
This Limited Warranty shall be limited to replacement parts, which prove
defective under normal use and service and which Mr . BarB-Q Products LLC
shall determine in its reasonable discretion upon examination to be defective
. Before returning any parts, you should contact Mr . Bar-B-Q Products LLC
Customer Care Department using the contact information listed below . If Mr .
Bar-B-Q Products LLC confirms, after examination, a defect covered by this
Limited Warranty in any returned part, and if Mr . Bar-B-Q Products LLC
approves the claim, Mr . Bar-B-Q Products LLC will replace such defective part
without charge . If you return defective parts, transportation charges must be
prepaid by you . Mr . Bar-B-Q Products LLC will return replacement parts to
the original retail purchaser, freight or postage prepaid .
This Limited Warranty does not cover any failures or operating difficulties
due to accident, abuse, misuse, alteration, misapplication, improper
installation or improper maintenance or service by you or any third party, or
failure to perform normal and routine maintenance on the product as set out in
this owner’s manual . In addition, the Limited Warranty does not cover damage
to the finish, such as scratches, dents, discoloration, rust or other weather
damage, after purchase . This Limited Warranty is in lieu of all other
expressed warranties .
Mr . Bar-B-Q Products LLC disclaims all warranties for products that are
purchased from sellers other than authorized retailers or distributors,
including the warranty of merchantability or the warranty of fitness for a
particular purpose .
Mr . Bar-B-Q Products LLC ALSO DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE . Mr . Bar-B-Q Products LLC SHALL HAVE NO
LIABILITY TO PURCHASER OR ANY THIRD PARTY FOR ANY SPECIAL, INDIRECT, PUNITIVE,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES . Mr . Bar-B-Q Products LLC further
disclaims any implied or expressed warranty of, and assumes no responsibility
for, defects in workmanship caused by third parties .
This Limited Warranty gives the purchaser specific legal rights; a purchaser
may have other rights depending upon where he or she lives . Some
jurisdictions do not allow the exclusion or limitation of special, incidental
or consequential damages, or limitations on how long a warranty lasts, so the
above exclusion and limitations may not apply to everyone .
Mr . Bar-B-Q Products LLC does not authorize any person or company to assume
for it any other obligation or liability in connection with the sale,
installation, use, removal, return, or replacement of its equipment, and no
such representations are binding on Mr . Bar-B-Q Products LLC .
Mr . Bar-B-Q Products LLC 10 Commerce Dr . Hauppauge, NY 11788, USA 1 .888
.398 .8643
Need help? 1.888.398.8643
Do not return to place of purchase
Replacement Parts . 1.888.398.8643
Patents Pending
Manufactured in China for: Mr . Bar-B-Q Products LLC
10 Commerce Dr . Hauppauge, NY 11788 1 .888 .398 .8643
MrBarBQProducts.com
© Mr . Bar-B-Q Products LLC Endless Summer ® is a Registered Trademark of Mr .
Bar-B-Q Products LLC Made from 7596 Bagasse (environmentally friendly sugar
cane pulp by-product)
GAD15310ES-EF-0M-F1C0
Documents / Resources
|
ENDLESS SUMMER GAD15310ES Liberty LP Gas Outdoor Fire
Pit
[pdf] Owner's Manual
GAD15310ES Liberty LP Gas Outdoor Fire Pit, GAD15310ES, Liberty LP Gas Outdoor
Fire Pit, LP Gas Outdoor Fire Pit, Gas Outdoor Fire Pit, Outdoor Fire Pit,
Fire Pit, Pit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>