DORMAN 742-528 Front Passenger Side Power Window Motor Installation Guide

DORMAN 742-528 Front Passenger Side Power Window Motor

Product Information

Specifications

• Model Number: 742-528
• Product Type: Window Regulator
• Compatibility: Refer to the appropriate shop manual for specific vehicle compatibility
• Installation Skill Level: Requires technical expertise, recommended to seek the services of a qualified technician if unsure

Product Usage Instructions

Installation

1. Refer to the vehicle’s shop manual for specific service procedures.
2. Disconnect the window regulator from the door and disconnect the wiring harness from the window lift motor.
3. Remove the window regulator assembly.
4. Unbolt the window lift motor from the window regulator.
5. Reconnect the window lift motor to the wiring harness while disconnected from the window regulator.
6. Using the switch, manually hold the window switch in the up position for 5 seconds (be cautious not to trigger the auto-up feature).
7. Reinstall the motor onto the window regulator and then reinstall the window regulator assembly.

FAQ

• Q: Can I install the window regulator without a service manual?
  • A: It is recommended to refer to the appropriate shop manual for specific service procedures. If you lack the skill or manual, it is advised to seek help from a qualified technician.
• Q: What should I do if the auto-up feature is triggered during the reset procedure?
  • A: Be cautious not to fully pull back the switch to avoid activating the auto-up feature. Follow the instructions carefully to ensure proper reset without unintended consequences.
• Q: Can I reinstall the window regulator without following the reset procedure?
  • A: The reset procedure is essential to ensure the proper functioning of the window regulator. Skipping any step may result in malfunction or incomplete installation.

ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully

Reset Procedure

1. Unbolt the window regulator from the door and disconnect the wiring harness from the window lift motor.

2. Remove window regulator assembly.

3. Unbolt the window lift motor from the window regulator.

4. With the window lift motor disconnected from the window regulator, reconnect the window lift motor to the wiring harness.

5. With the window lift motor connected to the wiring harness, using the switch MANUALLY holds the window switch in the up position for 5 seconds.
   (NOTE: Do not pull the switch fully back this will cause the auto-up feature to kick in, which will result in the internal limit switch not fully being activated.)

6.  Reinstall the motor onto the window regulator and reinstall the window regulator assembly.

Disclaimer:

Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety features.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>