timberk T-HGS21 Handle Garment Steamer Instruction Manual

timberk T-HGS21 Handle Garment Steamer

Product Information

Model: T-HGS21

The product is a handle garment steamer manufactured by Timberk. It is designed to remove wrinkles and freshen garments quickly and easily.

Technical Specifications

• Power: 1600W
• Voltage: 220-240V~/50Hz
• Water tank capacity: 1.9L
• Heat-up time: 30 seconds
• Continuous steam time: 2 hours
• Steam temperature: 270°C
• Product dimensions (LxWxH): 168x132x326mm

Product Usage Instructions

Important Information

IMPORTANT! Please read the instruction manual carefully before using the steamer. The manual contains important safeguards and descriptions, but it may not cover all possible situations you may encounter while using the device. The manufacturer is not responsible for any damage caused by incorrect installation, voltage fluctuations, or modifications made to the appliance.

NOTE: The device has a label with all the necessary technical data and other useful information. Only use the steamer for its intended purpose as specified in the manual.

Safeguards

1. Please read the instruction manual before use and keep it for future reference.
2. Before the first use, check that the voltage indicated on the rating label matches your home’s mains voltage.
3. This steamer is intended for home use only and should not be used for industrial purposes.

Usage Instructions

1. Fill the water tank with clean water. Ensure that the tank is securely closed.
2. Connect the steamer to a power source.
3. Wait for the steamer to heat up. The heat-up time is approximately 30 seconds.
4. Hold the steamer upright and press the steam button to release steam.
5. Gently glide the steamer over the fabric, keeping it at a slight distance to avoid direct contact.
6. To remove stubborn wrinkles, you can press the steamer against the fabric with light pressure.
7. For delicate fabrics, use a lower steam setting or hold the steamer further away from the fabric.
8. For best results, move the steamer in a downward motion following the natural flow of the fabric.
9. Refill the water tank when necessary. Always unplug the steamer before refilling.
10. After use, allow the steamer to cool down before storing it in a safe place.

We thank you for choosing our product and hope it serves you well. If you have any further questions or concerns, please refer to the instruction manual or contact our customer support.

Dear customer!
We thank you for your wise choice and for a purchase of a steamer. It will serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE
There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

SAFEGUARDS

1. Please read the instruction manual before use and save it for future references.
2. Before the first switching on check that voltage indicated on the rating label corresponds to the mains voltage in your home.
3. For home use only. Do not use for industrial purposes. Use the steam iron only for its intended use.
4. Do not use outdoors or in damp area.
5. Never pull the cord while disconnecting from the power outlet; instead, grasp the plug only and pull to disconnect.
6. Keep the cord away from sharp edges and hot surfaces.
7. Always unplug the device from the power supply when filling with water or emptying and when not in use.
8. To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.
9. Do not operate the steam iron with damaged cord or plug, or after the appliance malfunctions, or has been dropped or damaged in any manner. To avoid risk of electric shock, do not disassemble the steam iron; take it to a service center for examination, repair or mechanical adjustment.
10. The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
11. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance shall not be made by children without supervision.
12. Do not attempt to repair, adjust or replace any parts of the appliance. Check and repair the malfunctioning appliance in the nearest service center only.
13. Children should be supervised to ensure that they do not play with the appliance.
14. ATTENTION! Pour water into water tank only when the device is switched off from electric mains.
15. ATTENTION! To avoid burns please always unplug the garment steamer before attaching or detaching the fabric brush and allow it to cool completely.
16. ATTENTION! The garment steamer generates high temperatures of steam. Do not touch the steam head, make sure the steamer is facing away from you in an upright position.
17. ATTENTION! When using the garment steamer, make sure the steamer head is facing away from you and in an upright position.
18. ATTENTION! It is forbidden to turn on the device in the absence of water in the tank, this can lead to damage to the pump and failure of the device.
19. If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
20. Do not use accessories other than those supplied.

APPOINTMENT OF THE DEVICE
The garment steamer is easy to use and is perfect for removing wrinkles/creases from garments and curtains as well as refreshing furnishing fabrics.

SPECIFICATIONS

Specifications of the device are shown in Table 1.

Table 1

DEVICE DESCRIPTION

**Fig. 1***

1. Turbo mode indication (red)
2. Turbo mode button
3. ECO mode indication (blue)
4. ECO mode button
5. Power and ready to work indicator (green)
6. Water tank unlock
7. Water tank
8. Power cord
9. Clamp
10. Upper steam hole (under the clamp)
11. Removable brush
12. Removable high-temperature protection
13. Rubber brush
    The appearance of the device may differ from the images in the manual

DELIVERY SET

1. Steamer – 1 pc.
2. Cup – 1 pc.
3. Main brush – 1 pc.
4. Removable brush – 1 pc.
5. Removable high-temperature protection – pc.
6. Instruction manual – 1 pc.
7. Warranty card – 1 pc.
8. Packing – 1 pc.
9. PREPARATIONS

Filling the water tank:

WARNING! Fill the tank only if the device is unplugged.

• Pull out the water tank by pulling the lock button
• Detach the tank, open the rubber cover
• Fill tap water into the water tank until it reaches the maximum level (it is recommended to use distilled or filtered tap water)
• Put back the water tank.
• Hold the appliance with your hand positioned safely at the neck of the garment steamer in an upright position, use your other hand to attach the fabric brush onto the steam head. the fabric brush can be attached either way and will lock into position with an audible ”click”.

ATTENTION!
Detachable brush is suitable for deep cleaning of hard fabric. To steam the delicate fabrics use removable high temperature protection in order to avoid fabric contacting with the device

ATTENTION!
To avoid scalding please always unplug the garment steamer before attaching or detaching the fabric brush and allow it to cool completely.

• Connect the device to the mains – power and ready to work indicator will blink in green which means the device is started heating. When the green indicator stops to blink and start to glow – the device is ready to operate

Power mode selection

• The device has two power modes – ECO mode (4 – blue indicator) and Turbo mode (2 – red indicator)
• Select the desired mode according to the type of fabric
• In order to set the desired steam speed, press ECO button (4) or Turbo button (2)

STEAMING

• It can be used on most fabrics according to the fabric label.
• The garment steamer cab be easily used when the fabric is hanging. Put the garments onto the hanger, slightly stretch the fabric and check that there is nothing under the fabric which can be damaged by the steam

NOTE: we recommend you do not steam over metal accessories.

• To release steam press the ECO (4) or Turbo (2) button one time – corresponding indicator will start to glow. To turn off the steam, press the corresponding button again – the indicator will turn off.
• Keep a distance of at least 5 cm between the steam head and the garment and move your arm up and down motion. You will feel vibrations and hear a subtle humming sound while steaming; this is normal.

WARNING:

• the garment steamer generates high temperatures of steam. Do not touch the steam head, make sure the steamer is facing away from you in an upright position.
• when using the garment steamer, make sure the steamer head is facing away from you and in an upright position

Clamp for steaming
The device is equipped with the clamp for hard jams, located on the upper part of the device.
Open this clamp by pressing on its back part and place the fabric under it. Select the desired steam level by pressing the corresponding button – steam will come out from upper steam hole. Slide the device back and forth to achieve the best results.

NOTE:
Open the clamp and put the fabric under it only with turned off steam modes.

AFTER EACH USE

• Turn off the selected steam mode
• Disconnect the power cord from the power outlet.
• Disconnect the water tank and pour the water into the sink.
• Always empty the water tank after each use.

CARE AND STORAGE

• Always unplug the appliance before cleaning.
• Let the appliance cool down completely.
• Remove the fabric brush from its steam head
• Clean surfaces with a damp cloth.
• Do not use harsh or abrasive cleaning agents or solvents.
• Do not put the garment steamer in water or any other liquid.
• Do not locate the appliance near a heat source or direct sunlight.
• Always ensure the steam outlet hole is clean and free from scaling and not blocked.

SCALE REMOVING

• To prevent scale appear on inner surfaces of the unit, please use only distilled water.
• If use tap water scale appear on main parts of the garment steamer and it is recommended to clean it off once a month.
• Prepare solution of 50% vinegar and 50% water.
• Pour the solution inside the water tank.
• Use the device running idle, without steaming garments. If needed, running idle once again.
• Rinse water tank with flowing water. Pour water inside water tank and use the device running cycle.

UTILIZATION RULES
The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
For additional information about actual system of the garbage collection address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.

After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device. The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form.
The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and / or third parties, as well as in situations caused by natural and/or anthropogenic accidents.

www.timberk.ru

References

• Timberk - Официальный сайт бренда бытовой техники
• Dictionary

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>