JONATHAN Y JYL9915A 6 Inch 1 Light Brass Gold White Coastal French Country Iron LED Instruction Manual
- June 12, 2024
- JONATHAN Y
Table of Contents
JONATHAN Y JYL9915A 6 Inch 1 Light Brass Gold White Coastal French Country
Iron LED Instruction Manual
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED
ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE
ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT
INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced
If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PIECE| DESCRIPTION| PICTURE| QUANTITY| PIECE|
DESCRIPTION| PICTURE| QUANTITY
---|---|---|---|---|---|---|---
A| machine Screw| | 2X| F| Glass Shade| | 1X
B| Mounting Plate| | lx| G| Socket Ring| | lx
C| Wire Connections| | 3X| H| Ring| | 1X
D| Back Plate| | lx| I| Bulb| | 1X
E| Machine Screw| | 2X| | | |
Product Dimensions
6”W X 20″H X 6.75″E
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product. Estimated Assembly Time: 20 minutes
- Fix the Mounting Bracket(B) to the outlet box with machine Screw(A).
- Make wire connections, with Wire Connectors(C), following the reference chart listed below.
Connect, Hot, Black or Red Outlet Supply Wire to:| Connect, Neutral, White Outlet Supply Wire to:
---|---
Black| White
- Parallel Cord (round & smooth)| * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes)| Clear, Brown, Gold or Black with Tracer (colored stripes
Insulated Wire (not green) with copper metal conductor| Insulated Wire (not green) with Silver metal conductor
Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions
a) For installation in the United States: Wrap ground wire from outlet box
around green ground screw on mounting bracket, no less than 2″ from wire end.
Tighten ground screw. If fixture is supplied with a ground wire, connect to
outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire,
wrap ground wire around green grounding screw on mounting bracket. Tighten
ground screw.
- Orient the Back Plate (D) so that the holes in the ears on the side of the mounting bracket are aligned with the holes in the rear plate, and then secure with Machine Screws (E).
- IInstall the Glass Shade (F) and Socket Ring (G) to the Back Plate(D) and fix it with Ring (H)
- Install Bulb( I ). Be sure to use light Bulb( I ) with wattage no greater than specified on this fixture. Always make sure that electrical current is turned off before changing bulbs
PLEASUE USE TYPE”A” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT THERE ARE 1 X 4W LED BULBS IN THE BOX.
ENJOY YOUR LAMP
Documents / Resources
|
JONATHAN Y JYL9915A 6 Inch 1 Light Brass Gold White Coastal French Country
Iron
LED
[pdf] Instruction Manual
JYL9915A 6 Inch 1 Light Brass Gold White Coastal French Country Iron LED,
JYL9915A, 6 Inch 1 Light Brass Gold White Coastal French Country Iron LED,
Coastal French Country Iron LED, Country Iron LED, Iron LED
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>