JONATHAN Y JYL1129A Troy 24 Inch Table Lamp Instruction Manual

: October 30, 2023
: JONATHAN Y

Table of Contents

JONATHAN Y JYL1129A Troy 24 Inch Table Lamp
Product Information
Product Usage Instructions
CARE AND MAINTENANCE
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
Part List and Hardware List
PREPARATION FOR INSTALLATION
Dimensions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JONATHAN Y JYL1129A Troy 24 Inch Table Lamp

Product Information

Model: JYL1129A
Product Dimensions: 25Lx 8W x 24H
Pieces Included:

1. Lamp base (A) – 1
2. Socket (B) – 1
3. Shade (C) – 1
4. Socket Ring (D) – 1
5. Bulb (E) – 1 (LED 4-Watt bulb included in the box)
6. Arm (F) – 1

Recommended Bulb Type: On/Off Type A Bulb Max 40-Watt or LED Bulb Max 9-Watt

Product Usage Instructions

Inspect the product carefully before attempting to install. If there is any damage or obvious defect, do not install. The item may not be returned once it has been installed.
Unplug lamps before using any cleaning solutions.
Dust shades with a feather duster or with an appropriate vacuum-brush attachment.
Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
Before beginning assembly of the product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.
Put the shade (C) on the Socket (B), then tighten the metal ring (D) onto the Socket (B).
Insert the bulb (E) into the socket (B).
Screw the arm (F) onto the lamp base (A).
Put the light on a level surface to check if everything is stable.
Enjoy your lamp!

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE & IMPORTANT SAFETY INSTRUCTIONS

Please make sure that you have all parts indicated before you begin assembly of this item
This item should be assembled on a soft surface to prevent scratching the finish during assembly
To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed.
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 6 minutes.

PREPARATION FOR INSTALLATION

PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR LED BULB MAX 9-WATT, THERE IS LED 4-WATT BULB IN THE BOX.

Step 1
Put the shade (C) on the Socket (B),then tighten the metal ring (D) onto the Sokcet (B) . Insert the bulb (E) into the socket (B). Screw the arm (F) onto the lamp base(A).
Step 2
Put the light on a level surface to check if everything is stable.