702 LIGHTING MSDPRO Series Brass Uplight Integrated LED Instruction Manual
- September 7, 2024
- 702 LIGHTING
Table of Contents
702 LIGHTING MSDPRO Series Brass Uplight Integrated LED
DIMENSION
Medium MSDPRO/CCT adjustable accent light made of solid die-cut brass. Adjust your wattage, lumen output and color temperature via patent-pending Magnetic Step Dimming (MSD) functionality. Using the provided magnetic-key, easily switch between three-lumen outputs: 350lm, 650lm, or 950lm, and two color temperatures: 2700K or 3000K. Available in three beamspread angles of 20°, 40° or 60°. IP67 rated. Includes 8.75” ground stake and standard cowl which accepts 1 media (lens or louver). Long Cowl optional (accepts 2 media).
Specifications
| Wattage: | 4W | 8W | 13W | Beam Spread: | 20° / 40° / 60° |
|---|---|---|---|---|---|
| Volt Amps: | 6.6 | 12 | 18.6 | CRI: | 80+ |
| Lumens: | 350lm | 650lm | 950lm | IP Rating: | 67 |
| Temperature: | 2700K | 3000K | Operating Range: | 9-15 VAC | |
| Warranty: | 10 years | Lamp Life: | 50,000 Hours |
**Product SKU
Watts CCT Beam Finish**
702-UPLIGHT-MSDPRO-MEDIUM-2700/3000-20-BS| 4/8/13W| 2700/3000K| 20°| Antique
Brass
---|---|---|---|---
702-UPLIGHT-MSDPRO-MEDIUM-2700/3000-40-BS| 4/8/13W| 2700/3000K| 40°| Antique
Brass
702-UPLIGHT-MSDPRO-MEDIUM-2700/3000-60-BS| 4/8/13W| 2700/3000K| 60°| Antique
Brass
Each fixture comes pre-wired with 4.9’ ft lead, Integrated LED & includes (1) Magnetic Key, (1) 8.75” ground stake, (1) lock nut.
Magnetic Step Dimming (MSD) and Magnetic CCT Adjustment Directions
Magnetic Zone
Every MSDPRO Series product has a “magnetic zone” where the magnetic key will
work to change the desired setting. On the accent/uplights the zone is in the
area just above the etched lines, as shown in the image to the left. Place the
magnet in the area of the depicted zone and hold it there, touching the zone,
for 1.5 seconds or until you see a light flash. If you do not see a flash,
move the magnet and try again.
Each accent light comes with 1 magnetic key for adjustments. Other magnets can be used, though standard household magnets may not be strong enough. For replacements or extras, please contact sales@702-lighting.com
For video instructions, scan the QR code!
- To adjust wattage, place magnet in the area just above the etched line on the RIGHT side (with the fixture facing away from you) and hold for 1.5 seconds. Light will flash if successful. To adjust again, repeat, pausing for 1.5 seconds in between settings.
Magnetic Step Dimming
(MSD) Adjustment (R)
| Power| Lumens
---|---|---
Flashes 1 time| 13W| 950lm
Flashes 2 times| 8W| 650lm
Flashes 3 times| 4W| 350lm
- To adjust color temperature, place the magnet in the area just above the etched line on the LEFT side (with the fixture facing away from you) and hold for 1.5 seconds. Light will flash if successful. To adjust again, repeat, pausing for 1.5 seconds in between settings.
Magnetic CCT
Adjustment (L)
| Color
Temp
| Lumens
---|---|---
Flashes 1 time
|
3000K
| 350lm| 4W
650lm| 8W
950lm| 13W
Flashes 2 times
|
2700K
| 340lm| 4W
640lm| 8W
940lm| 13W
References
- Sustainable LED lighting solutions | Philips lighting
- 702 Lighting - Las Vegas Lighting Manufacturer