ELECOM TK-FDM106 Wireless Keyboard User Manual

TK-FDM106 Wireless Keyboard

Model: TK-FDM106/FDM106/ELECOM01B
Manual
Wireless Keyboard

Name and function of each part

1. Power Switch

2. Battery lamp
   If the battery is low during use, the lamp will blink orange during keyboard input.

3. Spacebar

4. Battery cover

5. Battery-storage compartment

6. Receiver unit-storage compartment

• The receiver unit is kept here when exported. 7. Receiver unit
  USB connector (male)

Insert the battery

1. Remove the battery cover.

2. Insert the battery.
   Insert with the correct battery plus and minus orientation.

3. Remove the receiver unit.

4. Re-attach the battery cover to its original state.

Turning the Power On

Slide the power switch to the on position.
Regarding standby mode
The keyboard is usually in standby mode. Tapping on any key will automatically wake the keyboard.
The keyboard will enter standby mode if there has not been any input for a fixed period of time.

Connecting to a PC

1. Start the PC.
   Start the PC, and then wait for it to be ready to perform operations.

2. Insert the receiver unit into the PC’s USB port.

3. The driver will be automatically installed. You will then be able to use the keyboard.

Any USB port may be used.

• Be sure to sufficiently check the connector orientation and the insertion location.
• If you feel a strong resistance when inserting the USB connector, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury.
• Do not directly touch the terminal area of the USB connector.

Specifications

(Updating the OS or installing a service pack may be necessary.)
•Compatibility information was retrieved during operation confirmation in our verification environment. There is no guarantee of complete compatibility with all devices, OS versions, and applications.
Interface| USB
Number of keys| 109 keys (Japanese layout)
Key type| Membrane
Key pitch| 19.0 mm
Key stroke| 3.5 mm
Radio frequency| 2.4 GHz band
Radio wave method| GFSK
Radio wave range| Non-magnetic materials (such as wooden desks): approximately 10 m Magnetic materials (such as iron desks): approximately3m
•These are test values in company environment and are not guaranteed.
Dimensions (W x D x H)| Keyboard
approx. 448 x 136 x 32 (mm) (The stand is not included.)
approx. 448 x 136 x 41 (mm) (Using a stand)
Receiver unit approx. 20 x 16 x 7 (mm)
Weight| Keyboard Receiver unit
approx. 568 g ‘excluding the battery approx. 2 g
Operational temperature/ humidity| 5°C to 40°C/ up to 90%RH (without condensation)
Storage temperature/ humidity| -10°C to 60°C/ up to 90%RH (without condensation)
Supported battery| Any one of AA alkaline battery, AA manganese battery, AA type nickel-metal hydride battery.
Operational time| Estimate when using alkaline battery
Approximately 4 years
•These are test values in company environment and are not guaranteed.

Safety Precautions

Prohibited action
Mandatory action
Situation that needs attention
WARNING
If a foreign object (water, metal chip, etc.) enters the product, immediately stop using the product, remove the receiver unit from the PC, and remove the battery from the product. If you continue to use the product under these conditions, it may cause a fire or electric shock.
If the product is behaving abnormally, such as by generating heat, smoke, or a strange smell, immediately stop using the product, shut down the PC, and then sufficiently check whether the product is generating heat while being careful to avoid being burned. Then, remove the receiver unit from the PC and remove the battery from the product. After that, contact the retailer from whom you purchased the product. Continuing to use the product under these conditions may cause a fire or electric shock.
Do not drop the product or otherwise subject it to impacts. If this product is damaged, immediately stop using it, remove the receiver unit from the PC, and remove the battery from the product. After that, contact the retailer from whom you purchased the product. Continuing to use the product while it is damaged may cause a fire or electric shock.
Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a fire, electric shock or product damage.
Do not put this product in fire, as the product may burst, resulting in a serious fire or injury.
Do not insert or remove the receiver unit with wet hands. Also, do not make alterations to or forcefully bend the receiver unit. Doing so may cause a fire or electric shock.
The receiver unit presents a swallowing hazard for children, so be sure to store the receiver unit in a place out of the reach of children.
CAUTION
Do not place this product in any of the following environments:

• In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes hot (around a heater, etc.)
• In a moist place or a place where condensation may occur
• In an uneven place or a place exposed to vibration
• In a place where a magnetic field is generated (near a magnet, etc.)
• In a dusty place

This product does not have a waterproof structure. Use and store this product in a place where the product body will not be splashed with water or other liquid. Rain, water mist, juice, coffee, steam or sweat may also cause product damage.
Do not use this product with any device that may significantly affect other equipment, in case the product malfunctions.
If the keyboard is not used for one month or more, remove the receiver unit from the PC.
When you no longer need to use this product and the battery, be sure to dispose of it in accordance with the local ordinances and laws of your area.
Batteries
Use AA alkaline batteries, AA manganese batteries, or rechargeable AA nickel hydride batteries with this product.
If this product is not going to be used for a long period of time, remove the battery to avoid battery leakage and failure.

Cleaning the Product
If the product body becomes dirty, wipe it with a soft, dry cloth.
Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may affect the material quality and colour of the product.

Cautions for Wireless Equipment

This product is wireless equipment using the entire range of the 2.4 GHz band and it is possible to avoid the band of  mobile object identification systems. GFSK is used for theradio wave method. The interference distance is 10 m.
The 2.4 GHz band is also used by medical equipment, Bluetooth, and wireless LAN equipment conforming to the IEEE802.11b/11g /11n standard.

• Before using this product, check that there are no other “radio stations”* operating nearby.
• If electromagnetic interference occurs between this product and other “radio stations”, move this product to another location or stop using this product.
• Other “radio stations” refer to industrial, scientific and medical devices using the 2.4 GHz band, as this product does, other radio stations of this type, licensed radio station premises for a mobile object identification system that is used in factory production lines, certain non-licensed low power radio stations and amateur radio stations.

WARNING

• Do not use with equipment which may cause serious consequences. There are rare cases in which an external radio wave at the same frequency, or the radio wave emitted from a mobile phone, causes this product to malfunction, slow down, or fail to operate.
• Do not use this product in a hospital or other locations where the use of radio waves is prohibited. The radio waves of this product may affect electronic and medical devices (e.g. pacemakers).
• Due to the possibility of hindering safe navigation of aircraft, the use of wireless keyboards in aircrafts is prohibited by the Civil Aeronautics Act. Remove the batteries from the keyboard before boarding and do not use after boarding.
• ELECOM is not liable for any accident or any indirect or consequential damage incurred due to the failure of this product.

Limitation of Liability

• In no event will ELECOM Co., Ltd be liable for any lost profits or special, consequential, indirect, punitive damages arising out of the use of this product.
• ELECOM Co., Ltd will have no liability for any loss of data, damages, or any other problems that may occur to any devices connected to this product.

Compliance status www.elecom.co.jp/global/certification/

FCC ID: YWO-FDM106
YWO-ELECOM01B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE; This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
NOTICE: The manufacture is not responsible for any radio or TV interference caused by unauthorized modifiation to this equipment. Such modifications could void the user’s authority to operate the equipment. In order to make improvements to this product, the design and specifications are subject to change without prior notice.
Responsible party
ELECOM USA, Inc.
18575 Jamboree Road Suite 600,
Irvine CA 92612 USA
elecomusa.com

RoHS: www.elecom.co.jp/global/certification/

CE Authorised representative:
Amazon Services Europe S.à r.l
38 avenue John F. Kennedy, L-1855 Luxembourg
Complies with IMDA standards DA106058.
: TK-FDM106 only
WEEE Disposal and Recycling Information
This symbol means that waste of electrical and electronic equipment (WEEE) should not be disposed as general household waste. WEEE should be treated separately to prevent possible harm to the environment or human health.
Consult your retailer or local municipal office for collection, return, recycle or reuse of WEEE.

Trademark and name of the manufacturer:
ELECOM CO., LTD.
www.elecom.co.jp/global/
Fushimimachi 4-1-1, Chuo-ku, Osaka City

• Unauthorised copying and/or reproducing of all or part of this manual is prohibited.
• The specifications and appearance of this product may be changed without prior notice for product improvement purposes.
• We shall bear no responsibility for any device failure or malfunction of other devices resulting from the use of this product.
• To export the part of this product applicable to strategic goods or services, export or service trading permission according to foreign currency laws is necessary.
• Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
• Company names, product names, and other names in this manual are either trademarks or registered trademarks.

A customer who purchases outside Japan should contact the local retailer in the country of purchase for enquiries.
In “ELECOM CO., LTD. (Japan)”, no customer support is available for  enquiries about purchases or usage in/from any countries other than Japan. Also, no foreign language other than Japanese is available.
Replacements will be made under stipulation of the Elecom warranty, but are not available from outside of Japan.
Wireless Keyboard
Manual, Safety precautions, and Compliance with regulations, 2nd edition, June 5, 2023

©2020 ELECOM Co., Ltd. All Rights Reserved.

References

• ELECOM USA
• ELECOM Global | エレコム株式会社

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>