JONATHAN Y MRE-6001 LED Light Mirror User Guide

JONATHAN Y MRE-6001 LED Light Mirror

PRODUCT IFORMATION

If you are unsure about fitting this product, please consult a qualified electrician.

Important Instructions

Please read the instructions carefully before setting up and installing the LED Lighted Mirror.

Suggested Tools

• Screw & Wall plug x 4 (Included in pack)
• Screw driver
• Mirror
• Wire nut x 3 (Included in pack)
• Drill

Product Information

The LED Lighted Mirror can adjust three kinds of color temperature. Press the switch once to change the color temperature and turn the mirror on or off. Press and hold the switch to dim the lumens.

Product Usage Instructions

1. Choose a suitable location to install the LED Lighted Mirror and mark the position for the screws.
2. Drill holes in the marked positions using a drill and insert the wall plugs.
3. Align the mirror with the holes and screw it into place using the screws provided.
4. Connect the wires using the wire nuts provided.
5. To turn on the mirror, press the switch once. To turn it off, press the switch again.
6. To adjust the color temperature, press the switch once. The color temperature will cycle through three options. Choose the desired color temperature by pressing the switch when it reaches that option.
7. To adjust the brightness, press and hold the switch. The lumens will start to dim. Release the switch when you reach your desired brightness level.

IMPORTANT
PLEASE READ THE INSTRUCTIONS BEFORE SET UP AND INSTALLATION

COMPONENTS AND FITTING

SAFETY WARNING

SAFETY

•  We suggest you spend a short time reading the instruction leaflet
•  Carefully check that you have all the parts before beginning assembly.
• Keep small parts and fittings out of children’s reach and keep children well away from construction area, as the unassembled product contains small parts, which could present a choking hazard.
•  We suggest you retain these instructions for future reference.
• This appliance can be used by adults ONLY.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

CAUTION

•  In order to avoid overheating, do not cover the mirror.
• Switch off the mains supply and remove the appropriate fuse or switch off the appropriate circuit breaker before commencing installation
•  Make sure that there is no danger that the cord or extension cord is inadvertently b e pulled or cause anyone to trip when in use.

ASSEMBLY INSTRUCTION

Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is complete.
Please note that each part has been assigned a number and proceed in a numerical order.

• STEP 1. Mark the position of the hanging screw.

• STEP 2. Fix the screw.

• STEP 3. Connect to the main supply

• STEP 4. Hang up the Mirror on the wall

INSTALLATION DIMENSON

Can adjust three kinds of color temperature. Press once to change color temp. and on-off. Press and hold switch for dimming the lumens.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>