JONATHAN Y JYL1128A Table Lamp Instruction Manual

JONATHAN Y JYL1128A Table Lamp

Product Information

The product is a lamp with a lamp base (Piece A), a socket (Piece B), a shade (Piece C), and a bulb (Piece D). The lamp has a polarized plug, which is a safety feature to reduce the risk of electric shock. The lamp requires an on/off Type A bulb with a maximum wattage of 40 watts or an LED bulb with a maximum wattage of 9 watts. The product dimensions are 4.375 inches in length,4.375 inches in width, and 9.5 inches in height.

Product Usage Instructions

WARNING: Inspect the item carefully before attempting to install it. If there is any damage or obvious defect, do not install it. Once installed, the item may not be returned.

Care and Maintenance: Unplug the lamp before using any cleaning solutions. Dust the shade with a feather duster or an appropriate vacuum brush attachment. Wipe the lamp with a soft, dry cloth and clean the lamp base with methods appropriate to the material. Avoid using chemicals and household cleaners as they may damage the finish.

Notice & Important Safety Instructions

• Make sure you have all parts indicated before beginning assembly of this item.
• Assemble the item on a soft surface to prevent scratching the finish during assembly.
• To reduce the risk of fire, electrical shock, or injury to persons or property, follow the guidelines below for safe use and installation:
  • The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp shall be destroyed.
  • This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not attempt to disregard this safety feature.

Preparation: Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. The estimated assembly time is 6 minutes.

Assembly Instructions

1. Insert the bulb (Piece D) into the socket (Piece B).
2. Put the light on a level surface to check if everything is stable.

Enjoy your lamp!

WARNING
INSPECT THE ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

• Please make sure that you have all parts indicated before you begin assembly of this item
• This item should be assembled on a soft surface to prevent scratching the finish during assembly
• To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
• The external flexible cable or cord of this lamp cannot be replaced;
• If the cord is damaged, the lamp shall be destroyed
• This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PREPARATION

Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.

PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR LED BULB MAX 9-WATT, THERE IS LED 9.5-WATT SMART BULB IN THE BOX.

Step 1

• Insert the bulb(D) into the socket(B).

Step2

• Put the light on a level surface to check if everything is stable.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>