JONATHAN Y JYL1132A Table Lamp Instruction Manual
- October 30, 2023
- JONATHAN Y
Table of Contents
JONATHAN Y JYL1132A Table Lamp
Product Information
The product is a lamp with model number JYL1132A. The lamp base, socket and a bulb are included in the package. The lamp has a polarized plug for safety purposes and should only be used with on/off type A bulbs with a maximum wattage of 40 watts or LED bulbs with a maximum wattage of 9 watts. There is an LED 4-watt bulb included in the package. The external flexible cable or cord of the lamp cannot be replaced, and if it is damaged, the lamp must be destroyed. The lamp should be assembled on a soft surface to avoid scratching the finish.
Product Usage Instructions
- Inspect the item carefully before attempting to install. If there is any damage or obvious defect, do not install as the item may not be returned once installed
- Unplug lamps before using any cleaning solutions.
- Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
- Make sure all parts indicated are present before beginning assembly of the item.
- Insert the bulb (C) into the socket (B).
- Put the light on a level surface to check if everything is stable.
- The lamp should only be used with on/off type A bulbs with a maximum wattage of 40 watts or LED bulbs with a maximum wattage of 9 watts. The LED 4-watt bulb included in the package can be used.
Model# JYL1132A
- Product Dimensions: 16.5″Lx 10″W x 23.5″H
WARNING: INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR LED BULB MAX 9-WATT, THERE IS LED 4-WATT BULB IN THE BOX .
- Step 1: Insert the bulb (C) into the socket (B).
- StACep2: Put the light on a level surface to check if everything is stable.
ENJOY YOUR LAMP