JONATHAN Y JYL3077A Lighting Instructions
- October 30, 2023
- JONATHAN Y
Table of Contents
JONATHAN Y JYL3077A Lighting
Product Information
This product is a lamp with model number JYL3077A. The lamp dimensions are 43L x 43W x 78.5H. The product comes with a lamp base, lamp body, socket, shade, socket ring, bulb, hexagon nut, tooth washer, screw, small wrench, and large wrench. The estimated assembly time for the product is 6 minutes. The lamp can use an on/off type A bulb with a maximum wattage of 40 or an LED bulb with a maximum wattage of 9. The product comes with three LED 9-watt bulbs in the box. Before installing the product, inspect it carefully for any damage or defects. Once the product has been installed, it cannot be returned if there is any damage or defect.
Product Usage Instructions
- Make sure all parts are present and compare them with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
- Ensure that all parts are aligned before assembling.
- Put the shade (D) on the socket (C) and then tighten the socket ring (E).
- Screw the base (A) onto the lamp body (B1).
- Insert the bulb (F) into the socket (C).
- Screw the tooth washer (H) onto the lamp body (B1).
- Screw the hexagon nut (I) onto the lamp body (B1) with the large wrench (G) and tighten it securely.
- Pull the power cord to connect the lamp body (B2) to the lamp body (B1).
- Put the lamp body (B2) onto the lamp body (B1).
- Screw the screw (J) onto the lamp body (B2) with the small wrench (K) and tighten it securely. Be careful not to twist the power cord.
- Put the lamp on a level surface to check if everything is stable before turning it on.
- Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed
- This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR LED BULB MAX 9-WATT THERE ARE 3PCS LED 9-WATT BULB IN THE BOX
-
Step 1
Make sure all parts could be aligned before assemble Do not rotate lamp body too hard avoid base screw broken Screw the Base (A) onto the Lamp body (B1) Screw the tooth washer (H) onto the Lamp body (B1) Screw the Hexagon nut (I) onto the Lamp body (B1) with large wrench(G),and tighten swcurely Pull power cord to connect the Lamp body (B2) to the Lamp body (B1). Put the Lamp body (B2) onto the Lamp body (B1) Screw the screw (J) onto the Lamp body (B2) with small wrench(K),and tighten swcurely Be careful not to twist the power cord and tighten securely .
-
Step 2
Put the shade (D) on the socket (C), then tighten the Socket ring (E) . Insert the bulb (F) into the socket (C).
-
Step 3
Put the light on a level surface to check if everything is stable.
Model# JYL3077A
Product Dimensions: 43″Lx 43″W x 78.5″H
ENJOY YOUR LAMP