VONYX WM55B Wireless Microphone Instruction Manual

: May 15, 2024
: VONYX

Table of Contents

WM55B Wireless Microphone
UNPACKING INSTRUCTION
POWERSUPPLY
OVERVIEW
OPERATION
FIRST TIME PAIRING
TECHNICAL SPECIFICATION
Documents / Resources

WM55B Wireless Microphone
Ref. nr.: 179.202 VONYX WM55B Wireless Microphone INSTRUCTION MANUAL

WM55B Wireless Microphone

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.

Prior to using the product, please ask advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The product contains voltage carrying parts. Therefore, do NOT open the housing.
Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
The product is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the product from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the product with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the product to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the product to an earthed mains outlet (220240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guidelines and follow the instructions.
Do not repeatedly switch the product on and off. This shortens the lifetime.
Keep the product out of the reach of children. Do not leave the product unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
If this product has a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
If the battery is damaged, please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product.
Keep the original packing material so that you can transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

OVERVIEW

DISPLAY
Display showing frequency, battery status and reception.
ON/OFF / VOLUME SWITCH BODYPACK
Rotate to turn the bodypack on/off or change the volume.
MICROPHONE INPUT
3.5mm microphone jack input.
SET
Press to manually sync the bodypack with the receiver.
BATTERY COMPARTMENT 2X AA 1.5VOLT
Compartment for 2x AA type batteries.
BATTERY COMPARTMENT 1X18650 3.7VOLT
Compartment for 1×18650 type battery.
ON/OFF SWITCH RECEIVER
Slide to turn the receiver on/off.
RF
Sync indicator. Shows pairing status.
USB CHARGE PORT
5V USB connector for charging the receiver’s battery.
CHARGE INDICATOR
Indicator showing charge status.
ANTENNA

VONYX WM55B Wireless Microphone - OVERVIEW

OPERATION

Open the battery cover (7) of the microphone receiver and insert the supplied battery. Charge the battery of the receiver using the supplied USB cable via USB charging port (10).
Open the battery compartment lid of the bodypack and insert 2x AA 1.5Volt batteries (6), note the polarity!
Insert the receiver in a 6.3 mm microphone jack of, for example, a mixer, active speaker, amplifier, etc.
Switch on the receiver (8) and microphone (2).
Synchronisation between microphone and receiver will initiate automatically.
If the channel is busy or interfering, you can change it manually by pressing the SET button (4).

FIRST TIME PAIRING

Turn off both units.
Turn on the bodypack whilst holding the SET button.
The display will start to flash. Release the switch (display will continue to flash).
Turn on the receiver. The RF light will flash several times before staying lit. The receiver has briefly made contact with the microphone.
Turn the microphone off and on again, the units should be paired.

TECHNICAL SPECIFICATION

Output connections	: 6.3mm jack
Frequency	: 863.000 – 865.000 MHz
Frequency response	: 40Hz – 80KHz
Frequency stability	: +/- 10ppm
RF output	: 10dBm
Sensitivity	: -95dB – -71dB
Signal-to-noise ratio	: >90dB
THD	: <0,5%
Output level: Master	: 300mV
Batteries	: 3.7V (18650 Li-ion cell)
Power supply	: 5V via USB
Dimensions: Receiver	: 115 x 35 x 25mm
Dimensions: Body pack	: 75 x 60 x 23mm
Weight	: 0,30kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
European Union
Tronios B.V.,
Bedrijvenpark Twente Noord 18,
7602KR Almelo, The Netherlands
** 2014/35/EU
2014/30/EU
2011/65/EC
2014/53/EU
United Kingdom
Tronios Ltd.,
130 Harley Street,
London W1G 7JU, United Kingdom
** S.I. 2016:1101
S.I. 2016:1091
S.I. 2012:3032
S.I. 2017:1206
Specifications and design are subject to change without prior notice.

www.tronios.com
Copyright © 2023 by TRONIOS the Netherlands

Documents / Resources

| VONYX WM55B Wireless Microphone [pdf] Instruction Manual
WM55B Wireless Microphone, WM55B, Wireless Microphone, Microphone
---|---
| VONYX WM55B Wireless Microphone [pdf] Instruction Manual
WM55B Wireless Microphone, WM55B, Wireless Microphone, Microphone