JONATHAN Y JYL8504 Floor Lamp Instruction Manual

JONATHAN Y JYL8504 Floor Lamp

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE & IMPORTANT SAFETY INSTRUCTIONS

• Please make sure that you have all parts indicated before you begin assembly of this item
• This item should be assembled on a soft surface to prevent scratching the finish during assembly
• To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
  *The external flexible cable or cord of this luminaire cannot be replaced;
  If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

Part List and Hardware List

| 1X
I| Screw|

| 1X
J| Big spanner|

| 1X
K| Socket|

| 1X
L| Shade|

| 1X
M| Out Ring| ****| 1X
N| Bulb| | 1X
O| Nut| | 2X
P| Small spammer| | 1X
Q| Knob| | 1X

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes. PLEASE USE ON/OFF TYPE”A” BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT THERE IS LED 9.5-WATT SMART BULB IN THE BOX

Step 1
Make sure all parts could be aligned before assemble
Unpack all parts from cartons carefully.
Insert the Lamp Body(D) i □fo the Lamp Body (C ),
Insert the Lamp Body(C) into the Lamp Base (A) through the sheet iron(B),Gasket(G) and Screw(H), Fix the screw(l)on bottom of base(A)by using Big spanner(J).
Insert the Lamp Body(bend)(F) into the Lamp Body (E ), then fix the nut(O) on it by using Small Spanner(P).

Step 2
Put the shade(L) on the socket(K),then tighten the out ring(M) on it.
Insert the bulb(N) into the socket(K).
Please unscrew the knob (Q) first before adjust the lamp height, and screw the knob(Q) to tight after lamp height adjust finished

Put the light on a level surface to check if everything is stable.

ENJOY YOUR LAMP

Documents / Resources

| JONATHAN Y JYL8504 Floor Lamp [pdf] Instruction Manual
JYL8504, JYL8504 Floor Lamp, Floor Lamp, JYL8504 Lamp, Lamp
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>