JONATHAN Y JYL3091A 61 Inch Floor Lamp Instruction Manual
- October 30, 2023
- JONATHAN Y
Table of Contents
JONATHAN Y JYL3091A 61 Inch Floor Lamp
Product Information
The product is a floor lamp with a model number JYL3091A and dimensions of 14Lx 14W x 61H. The lamp consists of a lamp base (A), three fasten tubes (B, C, D), a saddle (E), a socket (F), a bracing pipe (G), a shade (H), a finial (I), and two bulbs (J) (2 pcs LED 4-watt bulb included in the box). The lamp can be used with an on/off type A bulb max 60-watt or LED bulb max 9-watt.
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed
- This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR LED BULB MAX 9-WATT THERE ARE 2 PCS LED 4-WATT BULB IN THE BOX
- Make sure all parts could be aligned before assemble.
- Fasten tube(B) onto base(A).
- Fasten tube(C) onto tube(B) Fasten tube(D) onto tube(C).Saddle(E) onto tube(D).
- Put the shade(H) on the Bracing pipe(G),then tighten the Finial (I)into the Bracing pipe (G).
- Insert the bulb(J) into the socket(F).
- Put the light on a level surface to check if everything is stable. Enjoy your lamp!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>