JONATHAN Y JYL3094A Aveiro 61.5 Inch Brass Gold Classic Midcentury Iron LED Floor Lamp Instruction Manual

JONATHAN Y JYL3094A Aveiro 61.5 Inch Brass Gold Classic Midcentury Iron

LED Floor Lamp

Product Information

Model: JYL3094A
Product Dimensions: 19.5L X 15W X 61.5H

Product Usage Instructions

WARNING:
Inspect the item carefully before attempting to install. If there is any damage or obvious defect, do not install. The item may not be returned once it has been installed.

Care and Maintenance

1. Unplug lamps before using any cleaning solutions.
2. Dust shades with a feather duster or with an appropriate vacuum-brush attachment.
3. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material.
4. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE & IMPORTANT SAFETY INSTRUCTIONS:

• Please make sure that you have all parts indicated before you begin assembly of this item.
• This item should be assembled on a soft surface to prevent scratching the finish during assembly.
• To reduce the risk of fire, electrical shock, or injury to persons or property, please follow the guideline below for safe use and installation.
• The external flexible cable or cord of this lamp cannot be replaced; if the cord is damaged, the lamp shall be destroyed.
• This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to disregard this safety feature.

Part List and Hardware List

PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and  hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 15  minutes.

Please use ON/OFF TYPE A BULB MAX 100-WATT or CFL BULB MAX 23-WATT or LED BULB MAX 12-WATT. There is an LED 9-WATT bulb in the box.

Step 1:

1. Make sure all parts could be aligned before assembling.
2. Do not rotate the lamp body too hard to avoid base screw breakage.
3. Screw the Lamp body (B1) onto the Lamp base (A).
4. Screw the Lamp body (B2) onto the Lamp body (B1).
5. Screw the Lamp assembly (D) onto the Lamp body (C).
6. Screw the Lamp body (C) onto the Lamp body (B2).
7. Be careful not to twist the power cord and tighten securely.

Step 2:

1. Insert the harp (G) into the saddle (E).
2. Put the shade (H) on the harp (G), then tighten the finial (I) into the harp (G).
3. Insert the bulb (J) into the socket (F).

Step 3:

Put the light on a level surface to check if everything is stable.

Enjoy your lamp!

Model # JYL3094A
Product Dimensions: 19.5″L X 15″W X 61.5″H

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

• Please make sure that you have all parts indicated before you begin assembly of this item

• This item should be assembled on a soft surface to prevent scratching the finish during assembly

• To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation

• The external flexible cable or cord of this lamp cannot be replaced;
  If the cord is damaged, the lamp shall be destroyed

• This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX

1. Step 1
   Make sure all parts could be aligned before assemble
   Do not rotate lamp body too hard avoid base screw broken
   Screw the Lamp body (B1) onto the Lamp base(A)
   Screw the Lamp body (B2) onto the Lamp body (B1)
   Screw the Lamp assembly (D) onto the Lamp body(C)
   Screw the Lamp body (C) onto the Lamp body(B2)
   Be careful not to twist the power cord and tighten securely
   ENJOY YOUR LAMP

2. Step 2
   Insert the harp (G) into the saddle (E).
   Put the shade(H) on the harp(G) ,then tighten the finial (I) into the harp (G) Insert the bulb(J) into the socket(F).

3. Step 3
   Put the light on a level surface to check if everything is stable.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>