JONATHAN Y JYL7596A LED Pendant Light Instruction Manual
- June 12, 2024
- JONATHAN Y
Table of Contents
JONATHAN Y JYL7596A LED Pendant Light
Product Information
This lighting fixture model JYL7596A is designed to provide illumination in various indoor spaces. It features a sleek design with a body (I), tubes (H), a canopy (F), and a bulb (J).
Product Dimensions: 11.25 inches in diameter and adjustable height from 28.5 to 58.5 inches.
The package includes the following parts:
- A: Mounting screw (2x)
- B: Mounting plate
- C: Machine screw
- D: Ground screw
- E: Wire connector (3x)
- F: Canopy
- G: Screwed ball (2x)
- H: Tube
- I: Body
- J: Bulb
Product Usage Instructions
- Before starting the assembly, ensure that all parts are present and in good condition. Refer to the part list and hardware list provided.
- Warning: Switch off the main electrical supply from the main fuse box/circuit breaker before installation.
- Inspect the item carefully. If there is any damage or obvious defect, do not proceed with the installation. The item cannot be returned once installed.
- Thread the mounting screws (A) into the matching holes of the mounting plate (B).
- Fix the mounting plate (B) to the outlet box using the machine screw (C).
- Connect the tubes (H) together to achieve the desired length. Fix the bottom end to the nipple of the body (I) and the top end to the swivel of the canopy (F).
- Make wire connections using the wire connectors (E) according to the reference chart provided:
- Connect Hot, Black or Red Outlet Supply Wire to Black Parallel Cord (round & smooth) or Clear, Brown, Gold or Black without Tracer stripes.
- Connect Neutral, White Outlet Supply Wire to White Parallel Cord (square & ridged) or Clear, Brown, Gold or Black with Tracer (colored stripes).
- Grounding Instructions:
- For installation in the United States: Wrap the ground wire from the outlet box around the green ground screw (D) on the mounting plate.
- For installation in Canada: If the fixture is supplied with a ground wire, wrap it around the green grounding screw on the mounting plate.
- Orient the ceiling canopy (F) so that the mounting screws (A) go into the holes in the canopy (F). Secure it with the provided screwed balls (G).
- Install a bulb (J) with a wattage no greater than specified on this fixture. Always ensure that the electrical current is turned off before changing bulbs.
- Please use an on/off type A bulb with a maximum wattage of 40 watts or an LED bulb with a maximum wattage of 9 watts. There is an LED 4-watt bulb included in the box.
- Enjoy your lamp!
- Model#: JYL7596A
- Product Dimensions: 11.25″D X 28.5-58.5″H
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED
ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
CARE AND MAINTENANCE
To clean the outside of the fixture, use a dry or slightly dampened clean
cloth (use clean water, never a solvent) to wipe the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by
turning off the circuit breaker or by removing the fuse at the fuse box. Next,
use a dry or slightly dampened clean cloth (use clean water, never a solvent)
to wipe the interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a
dry soft cloth to dust or wipe carefully.
MPORTANT SAFETY INSTRUCTIONS
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this luminaire cannot be replaced
If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE| DESCRIPTION| PICTURE| QUANTITY| PIECE|
DESCRIPTION| PICTURE| QUANTITY
---|---|---|---|---|---|---|---
A
| ****
mounting screw
| |
2X
| ****
F
| ****
canopy
| |
1X
B
| ****
mounting plate
| |
1X
| ****
G
| ****
screwed ball
| |
2X
C
| ****
machine screw
| |
2X
| ****
H
| ****
tube
| | 12“ – 2X
6″ – 2X
D
| ****
ground screw
| ****
| ****
1X
| ****
I
| ****
body
| |
1X
E
| ****
wire connector
| |
3X
| ****
J
| ****
bulb
| |
1X
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
- Thread mounting screws (A) into the mattch holes of the mounting plate(B), then fix the mounting plate(B) to the outlet box with machine screw(C).
- connect the tubes(H) together to get desired length and fix the bottom end to nipple of the body (I), the top end to the swivel of the canopy (F).
- Make wire connections, with wire connectors(E), following the reference chart listed below.
Connect, Hot, Black or Red Outlet Supply Wire to:| Connect, Neutral, White Outlet Supply Wire to:
---|---
Black| White
- Parallel Cord (round & smooth)| * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes)|
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
|
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is
square shaped and ridged and the hot wire will be round in shape and smooth. (
See Illustration on left. )
Grounding Instructions:
* **a)** For installation in the United States: Wrap ground wire from outlet box around green ground screw(D) on mounting plate, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
* **b)** For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting plate. Tighten ground screw.- Orient the ceiling canopy(F) so that the mounting screws(A) protruding from the mounting plate (B) go into the holes in the canopy (F), then secure it with the provided screwed balls(G).
- Install bulb(J). Be sure to use light bulb(s) with wattage no greater than specified on this fixture. Always make sure that electrical current is turned off before changing bulbs.
PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR LED BULB MAX 9 -WATT THERE IS LED 1PC 4WATT BULB IN THE BOX
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>