JONATHAN Y JYL1309A Liam 8.25 Inch 1-Light Wood-Oil Rubbed Bronze Rustic Farmhouse Iron LED Sconce Instruction Manual
- June 12, 2024
- JONATHAN Y
Table of Contents
JONATHAN Y JYL1309A Liam 8.25 Inch 1-Light Wood-Oil Rubbed Bronze Rustic
Farmhouse Iron LED Sconce
Product Information
Model: JYL1309A
Product Dimensions: 8.25″ W x 10″ H x 4.25″ H
Product Usage Instructions
WARNING
- We recommend installation of this lighting fixture be done by a licensed electrician.
- Switch off the main electrical supply from the main fuse box/circuit breaker before installation.
- Inspect the item carefully before attempting to install. If there is any damage or obvious defect, do not install. The item may not be returned once it has been installed.
Part List and Hardware List
- A – Mounting Screw (2x)
- B – Mounting Plate (1x)
- C – Machine Screw (2x)
- D – Ground Screw (1x)
- E – Wire Connector (3x)
- F – Body (1x)
- G – Screwed Ball (2x)
- H – Bulb (1x)
CARE AND MAINTENANCE
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
- To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.
- Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this luminaire cannot be replaced
- If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
Preparation
Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
Assembly Instructions
- Thread mounting screws (A) into the matching holes of the mounting plate (B), then fix the mounting plate (B) to the outlet box with machine screw (C).
- ake wire connections, with wire connectors (E), following the reference chart listed below:
- Connect Hot, Black or Red Outlet Supply Wire to:
- Black * Parallel Cord (round & smooth)
- Clear, Brown, Gold or Black without Tracer stripes (colored)
- Connect Neutral, White Outlet Supply Wire to:
- White * Parallel Cord (square & ridged)
- Clear, Brown, Gold or Black with Tracer (colored stripes)
- Insulated Wire (not green) with copper metal conductor
- Insulated Wire (not green) with Silver metal conductor
Note: When parallel wire (SPT I & SPT II) is used, the neutral wire is square shaped and ridged, and the hot wire will be round in shape and smooth. See illustration on the left.
- Grounding Instructions:
- For installation in the United States: Wrap ground wire from outlet box around green ground screw (D) on the mounting plate, no less than 2″ from wire end. Tighten ground screw. If the fixture is supplied with a ground wire, connect it to the outlet ground wire with a wire connector.
- For installation in Canada: If the fixture is supplied with a ground wire, wrap the ground wire around the green grounding screw on the mounting plate. Tighten ground screw.
- Orient the ceiling body (F) so that the mounting screws (A) protruding from the mounting plate (B) go into the holes in the body, then secure it with the provided screwed balls (G).
- Install bulb (H). Be sure to use light bulb(s) with wattage no greater than specified on this fixture. Always make sure that electrical current is turned off before changing bulbs.
Bulb Specifications
Please use ON/OFF type A bulb max 40-watt or LED bulb max 9-watt. There is an
LED 1pc 4watt bulb included in the box.
Enjoy Your Lamp
Documents / Resources
|
JONATHAN Y JYL1309A Liam 8.25 Inch 1-Light Wood-Oil Rubbed Bronze Rustic
Farmhouse Iron LED
Sconce
[pdf] Instruction Manual
JYL1309A Liam 8.25 Inch 1-Light Wood-Oil Rubbed Bronze Rustic Farmhouse Iron
LED Sconce, JYL1309A, Liam 8.25 Inch 1-Light Wood-Oil Rubbed Bronze Rustic
Farmhouse Iron LED Sconce, Wood-Oil Rubbed Bronze Rustic Farmhouse Iron LED
Sconce, Rustic Farmhouse Iron LED Sconce, Farmhouse Iron LED Sconce, Iron LED
Sconce, LED Sconce, Sconce
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>