JONATHAN Y JYL7128C Mario 22 Inch 1 Light Modern Contemporary Instruction Manual
- June 12, 2024
- JONATHAN Y
Table of Contents
JONATHAN Y JYL7128C Mario 22 Inch 1 Light Modern Contemporary Instruction
Manual
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE
OROBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INS
CARE AND MAINTENANCE
To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never a solvent) to wipe the interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wip
NOTICE & IMPORTANT SAFETY INSTRUCTI
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced If the cord is damaged, the lamp shall be destroy
Part List and Hardware List
PIECE| DESCRIPTION| PICTURE| QUANTIT| PIECE|
DESCRIPTIO| PICTURE| QUANTITY
---|---|---|---|---|---|---|---
A| wire connecto| | 3X| E| ground screw| | 1X
B| mounting bracke| | 1X| F| mounting scre| | 2X
C| machine scre| | 2X| G| the metal plat| | 2X
D| canopy| | 1X| | | |
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contentslist and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
- Fix the mounting bracket(B) to the outlet box with mounting screw(F).
- Make wire connections, with wire connectors(A), following the reference chart listed
Connect, Hot, Black or Red Outlet Supply Wi| Connect, Neutral, White Outlet
Supply Wire to:
---|---
Black| White
- Parallel Cord (round & smoot| * Parallel Cord (square & ridged
Clear, Brown, Gold or Black without Tracer (colored str| Clear, Brown, Gold or Black with Tracer (colored stri
Insulated Wire (not green) with copper metal cond| Insulated Wire (not green) with Silver metal conductor
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on
Grounding Instruct
a) For installation in the United States: Wrap ground wire from outlet
box around green ground screw(E) on mounting bracket, no less than 2″ from
wire end. Tighten ground screw. If fixture is supplied with a ground wire,
connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire,
wrap ground wire around green grounding screw on mounting bracket. Tighten
ground sc
Carefully remove packaging from fixture, fix the canopy(D) to bracket(B) using machine screw(C).
ENJOY YOUR LAMP’
Documents / Resources
|
JONATHAN Y JYL7128C Mario 22 Inch 1 Light Modern
Contemporary
[pdf] Instruction Manual
JYL7128C Mario 22 Inch 1 Light Modern Contemporary, JYL7128C, Mario 22 Inch 1
Light Modern Contemporary, 22 Inch 1 Light Modern Contemporary, Modern
Contemporary, Contemporary
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>