JONATHAN Y JYL9925A Bee 13.5 Inch 3-Light Modern Bohemian Iron Glass LED Pendant Instruction Manual

June 12, 2024
JONATHAN Y

JYL9925A Bee 13.5 Inch 3-Light Modern Bohemian Iron Glass LED Pendant
Instruction Manual

JONATHAN Y JYL9925A Bee 13.5 Inch 3-Light Modern Bohemian Iron Glass LED
PendantModel#: JYL9925
Product Dimensions: Ø13.5”X17.576.5”H

JYL9925A Bee 13.5 Inch 3-Light Modern Bohemian Iron Glass LED Pendant

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never a solvent) to wipe the interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

  • Please make sure that you have all parts indicated before you begin assembly of this item
  • This item should be assembled on a soft surface to prevent scratching the finish during assembly
  • To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
  • The external flexible cable or cord of this luminaire cannot be replaced
    If the cord is damaged, the luminaire shall be destroyed

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY
A Mounting Plate 1X
B Canopy lx
C Hanging Loop lx
D Canopy Nut IX
E Chain 1X
F Closable Link / cap 2X
G Nut 3X
H Mounting Screw 2X
I Wire Nut 3X
J Lamp Body 1X
K Loop 1X
L Lamp Shade IX
M bulb 3X

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.

  1. Turn clockwise to fix the lifting Loop (K) to the Lamp Body (J)
  2. Insert the bulbs (M) into the Sockets. Be sure to use light bulb(M) with wattage no greater than specified on this fixture. Always make sure that electrical current is turned off before changing bulbs.
  3. Carefully place the Lamp Body (J) into the Lamp Shade (L) and turn the Nut (G) clockwise to secure it 4. Screw the Chain(E) to the Hanging Loop(C) and the loop of the Loop with Closable Link(F)
  4. Insert wires through the Chain(E), Hanging Loop(C),Canopy(B) and Mounting Plate(A).
  5. Separate the Mounting Plate(A) from the Canopy (B) by unscrewing the Canopy Nut(D)anti-clockwise.
  6. Fix the Mounting Plate(A) to the junction box with Mounting Screw (H).

JONATHAN Y JYL9925A Bee 13.5 Inch 3-Light Modern Bohemian Iron Glass LED
Pendant - picture 15

Connect, Hot, Black or Red Outlet Supply Wire to:| Connect, Neutral, White Outlet Supply Wire to:
---|---
Black| White

  • Parallel Cord (round & smooth)| * Parallel Cord (square & ridged)
    Clear, Brown, Gold or Black without Trace (colored stripes)|  Clear, Brown, Gold or Black with Tracer (colored stripes)
    Insulated Wire (not green) with copper metal conductor| Insulated Wire (not green) with Silver metal conductor.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on mounting bracket, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting bracket. Tighten ground screw.
8. Attach the Canopy(B) to the junction box and fix it by turning the Canopy Nut (D) clockwise.
PLEASUE USE TYPE”B” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT
THERE ARE 3 X 4W LED BULBS IN THE BOX.

ENJOY YOUR LAMP

Documents / Resources

| JONATHAN Y JYL9925A Bee 13.5 Inch 3-Light Modern Bohemian Iron Glass LED Pendant [pdf] Instruction Manual
JYL9925A, JYL9925B, JYL9925A Bee 13.5 Inch 3-Light Modern Bohemian Iron Glass LED Pendant, Bee 13.5 Inch 3-Light Modern Bohemian Iron Glass LED Pendant, 13.5 Inch 3-Light Modern Bohemian Iron Glass LED Pendant, 3-Light Modern Bohemian Iron Glass LED Pendant, Modern Bohemian Iron Glass LED Pendant, Bohemian Iron Glass LED Pendant, Iron Glass LED Pendant, Glass LED Pendant, LED Pendant, Pendant
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

JONATHAN Y User Manuals

Related Manuals