JONATHAN Y JYL1111A Hank Table Lamp Instruction Manual
- October 30, 2023
- JONATHAN Y
Table of Contents
Hank Table Lamp
Instruction Manual
Model#
JYL1111A Product
Dimensions: 14″Lx 14″W x 27″H
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE| DESCRIPTION| PICTURE| QUANTITY| PIECE|
DESCRIPTION| PICTURE| QUANTITY
---|---|---|---|---|---|---|---
A| Lamp base| | 1X| D| Shade| | 1X
B| Socket| | 2X| E| Finial| | 1X
C| Pole| | 1X| F| Bulb| | 2X
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR LED BULB MAX 9-WATT, THERE ARE
2PCS LED 4-WATT BULB IN THE BOX .
Step 1
Insert the Pole (C) into the Lamp base(A).
Put the shade(D) on the Pole(C),then tighten the Finial (E)into the Pole (C)
Insert the bulb(G) into the socket(B).
Step2
Put the light on a level surface to check if everything is stable.
ENJOY YOUR LAMP
Documents / Resources
|
JONATHAN Y JYL1111A Hank Table
Lamp
[pdf] Instruction Manual
JYL1111A, JYL1111A Hank Table Lamp, Hank Table Lamp, Table Lamp, Lamp
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>