Chargers HY08 3 In 1 Wireless Charger User Manual

June 8, 2024
Chargers

3 IN 1 Wireless charger
User Manual

Functional components

Product Description

Mobile phone power: 5W/7.5W/10W/15W, after placing the mobile phone with wireless charging function in the charging position of the mobile phone, the mobile phone starts to charge, the corresponding left indicator light is green and stays on, and the green light flashes for 3 seconds after the power is fully charged
Headphone power: After the headphone box with wireless charging function is placed in the corresponding charging position, the headphone box starts to charge, and the corresponding right indicator light is green and remains constant.
Watch power: After placing the Apple Watch in the watch charging position, the watch starts to charge. Insert the stand on the reverse back to charge the Galaxy watch.

Specification

Name:3 IN 1 Wireless charger Output Power:5W/7.5W/10W/15W Max
model:HY08 watch power:2.5W
Product Size:11711865.4mm Headphone power:3W
Package dimensions:10712068mm priority distance:3-6mm
material:ABS Conversion efficiency:≥75%
Input power:5V/2A 9V/3A working frequency:115-205KHz

Precautions

  1. Do not hit this product or throw it into fire or water to avoid short circuit leakage.
  2. Do not store this product in a place with a lot of dust and high or low temperature (temperature range -10—+40°C)
  3. Please keep the distance between the implanted medical device (pacemaker, cochlear implant, etc.) and the wireless charger at least 20CM to avoid potential interference with medical equipment.
  4. Please place this product in a place that is not easily accessible to children to avoid accidents.
  5. Please use the standard accessories of this product. If the product is damaged due to the use of non-standard accessories, it is not covered by the warranty.
  6. It is forbidden to disassemble the product without permission. If the product is damaged, it will not be covered by the warranty.

Package

Wireless charger 1 Type-C charging cable 1 The instructions *1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals