CANARMNA IWF256A01BPT New Yorker Single Light Instruction Manual

June 3, 2024
CANARMNA

WALL FIXTURE
IWF256A01 IVL256A02 IVL256A03 08/21
Instruction Manual

IWF256A01BPT New Yorker Single Light

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS

TOOLS AND MATERIALS REQUIRED:

CANARMNA IWF256A01BPT New Yorker Single Light - Fig

Phillips Screwdriver| Wire Cutters
CANARMNA IWF256A01BPT New Yorker Single Light - Fig 1
Pliers| Wrench

Wiring supplies as required by local electrical code

SAFETY PRECAUTIONS:

  1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
  2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
  3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THEHAZARDS INVOLVED.
  4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

INSTALLATION:

CANARMNA IWF256A01BPT New Yorker Single Light

  1. Mount the mounting bracket to electrical box using electrical box screws (not  included). Make sure the studs on the mounting bracketare facing out from the electrical box.
  2. Position mounting bracket so that the fixture will be hung properly once it is mounted to the wall. Tighten the screws to hold in place.CANARMNA IWF256A01BPT New Yorker Single Light - Fig 3
  3. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect black wire from fixture to black wire in electrical box and connect the white wire from fixture to white wire in electrical box.
  4. Tuck electrical wires into electrical box and position fixture over studs on mounting bracket assembly. Secure fixture in place with star washers and cap nuts.CANARMNA IWF256A01BPT New Yorker Single Light - Fig 3
  5. Remove spinner nut from socket. Position the glass on lamp and secure with spinner nut.
  6. Install proper bulb type and wattage (not included).

Tel:613-342-5424,
Fax: 800-263-4598

Our service team is ready to answer your questions…
Monday – Friday 8M1.5PMEST
1-800-265-1833 (English) / 1-800-567-2513 (French)
IN CANADA ressalescanada@canarmna.ca
IN USAressalesusa@canarmna.ca

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

CANARMNA User Manuals

Related Manuals