C2G 41058 4 Port HDMI Splitter 4K30 User Guide
- June 4, 2024
- C2G
Table of Contents
C2G 41058 4 Port HDMI Splitter 4K30
PACKAGE CONTENTS
- 4-Port HDMI® Splitter 4K30
- Power Adapter
- Quick Start Guide
DEVICE INSTALLATION
Note:
- Prior to installation ensure that all devices are powered off.
Step 1: Connect HDMI source device to the HDMI input on the splitter.
Step 2: Connect HDMI displays to the HDMI outputs on the splitter.
Step 3: Connect the 5V power adapter to the power input on the HDMI
splitter.
Note: LED lights confirm when connection is made.
C2G WARRANTY
At C2G we want you to be totally confident in your purchase. That is why we offer a warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device.
To request a Return Merchandise Authorization (RMA) number, contact customer service at 800-506-9607 or www.c2g.com.
FCC Statement
Note: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Statement – §15.105(b):
“This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution – §15.21:
“Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.”
© 2018 Legrand All Rights Reserved rev.05/18 QSG – 41058 (US) 82058 (EMEA)
6500 Poe Avenue
Dayton, OH 45414
N. America Phone 800.293.4970
EMEA Phone +44 (0)1952 677300
www.c2g.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>